| /* | 
 |  * AD714X CapTouch Programmable Controller driver (I2C bus) | 
 |  * | 
 |  * Copyright 2009-2011 Analog Devices Inc. | 
 |  * | 
 |  * Licensed under the GPL-2 or later. | 
 |  */ | 
 |  | 
 | #include <linux/input.h>	/* BUS_I2C */ | 
 | #include <linux/i2c.h> | 
 | #include <linux/module.h> | 
 | #include <linux/types.h> | 
 | #include <linux/pm.h> | 
 | #include "ad714x.h" | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int ad714x_i2c_suspend(struct device *dev) | 
 | { | 
 | 	return ad714x_disable(i2c_get_clientdata(to_i2c_client(dev))); | 
 | } | 
 |  | 
 | static int ad714x_i2c_resume(struct device *dev) | 
 | { | 
 | 	return ad714x_enable(i2c_get_clientdata(to_i2c_client(dev))); | 
 | } | 
 | #endif | 
 |  | 
 | static SIMPLE_DEV_PM_OPS(ad714x_i2c_pm, ad714x_i2c_suspend, ad714x_i2c_resume); | 
 |  | 
 | static int ad714x_i2c_write(struct ad714x_chip *chip, | 
 | 			    unsigned short reg, unsigned short data) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(chip->dev); | 
 | 	int error; | 
 |  | 
 | 	chip->xfer_buf[0] = cpu_to_be16(reg); | 
 | 	chip->xfer_buf[1] = cpu_to_be16(data); | 
 |  | 
 | 	error = i2c_master_send(client, (u8 *)chip->xfer_buf, | 
 | 				2 * sizeof(*chip->xfer_buf)); | 
 | 	if (unlikely(error < 0)) { | 
 | 		dev_err(&client->dev, "I2C write error: %d\n", error); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ad714x_i2c_read(struct ad714x_chip *chip, | 
 | 			   unsigned short reg, unsigned short *data, size_t len) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(chip->dev); | 
 | 	int i; | 
 | 	int error; | 
 |  | 
 | 	chip->xfer_buf[0] = cpu_to_be16(reg); | 
 |  | 
 | 	error = i2c_master_send(client, (u8 *)chip->xfer_buf, | 
 | 				sizeof(*chip->xfer_buf)); | 
 | 	if (error >= 0) | 
 | 		error = i2c_master_recv(client, (u8 *)chip->xfer_buf, | 
 | 					len * sizeof(*chip->xfer_buf)); | 
 |  | 
 | 	if (unlikely(error < 0)) { | 
 | 		dev_err(&client->dev, "I2C read error: %d\n", error); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < len; i++) | 
 | 		data[i] = be16_to_cpu(chip->xfer_buf[i]); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ad714x_i2c_probe(struct i2c_client *client, | 
 | 					const struct i2c_device_id *id) | 
 | { | 
 | 	struct ad714x_chip *chip; | 
 |  | 
 | 	chip = ad714x_probe(&client->dev, BUS_I2C, client->irq, | 
 | 			    ad714x_i2c_read, ad714x_i2c_write); | 
 | 	if (IS_ERR(chip)) | 
 | 		return PTR_ERR(chip); | 
 |  | 
 | 	i2c_set_clientdata(client, chip); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ad714x_i2c_remove(struct i2c_client *client) | 
 | { | 
 | 	struct ad714x_chip *chip = i2c_get_clientdata(client); | 
 |  | 
 | 	ad714x_remove(chip); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct i2c_device_id ad714x_id[] = { | 
 | 	{ "ad7142_captouch", 0 }, | 
 | 	{ "ad7143_captouch", 0 }, | 
 | 	{ "ad7147_captouch", 0 }, | 
 | 	{ "ad7147a_captouch", 0 }, | 
 | 	{ "ad7148_captouch", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, ad714x_id); | 
 |  | 
 | static struct i2c_driver ad714x_i2c_driver = { | 
 | 	.driver = { | 
 | 		.name = "ad714x_captouch", | 
 | 		.pm   = &ad714x_i2c_pm, | 
 | 	}, | 
 | 	.probe    = ad714x_i2c_probe, | 
 | 	.remove   = ad714x_i2c_remove, | 
 | 	.id_table = ad714x_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(ad714x_i2c_driver); | 
 |  | 
 | MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor I2C Bus Driver"); | 
 | MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); | 
 | MODULE_LICENSE("GPL"); |