|  | /* 82596.c: A generic 82596 ethernet driver for linux. */ | 
|  | /* | 
|  | Based on Apricot.c | 
|  | Written 1994 by Mark Evans. | 
|  | This driver is for the Apricot 82596 bus-master interface | 
|  |  | 
|  | Modularised 12/94 Mark Evans | 
|  |  | 
|  |  | 
|  | Modified to support the 82596 ethernet chips on 680x0 VME boards. | 
|  | by Richard Hirst <richard@sleepie.demon.co.uk> | 
|  | Renamed to be 82596.c | 
|  |  | 
|  | 980825:  Changed to receive directly in to sk_buffs which are | 
|  | allocated at open() time.  Eliminates copy on incoming frames | 
|  | (small ones are still copied).  Shared data now held in a | 
|  | non-cached page, so we can run on 68060 in copyback mode. | 
|  |  | 
|  | TBD: | 
|  | * look at deferring rx frames rather than discarding (as per tulip) | 
|  | * handle tx ring full as per tulip | 
|  | * performance test to tune rx_copybreak | 
|  |  | 
|  | Most of my modifications relate to the braindead big-endian | 
|  | implementation by Intel.  When the i596 is operating in | 
|  | 'big-endian' mode, it thinks a 32 bit value of 0x12345678 | 
|  | should be stored as 0x56781234.  This is a real pain, when | 
|  | you have linked lists which are shared by the 680x0 and the | 
|  | i596. | 
|  |  | 
|  | Driver skeleton | 
|  | Written 1993 by Donald Becker. | 
|  | Copyright 1993 United States Government as represented by the Director, | 
|  | National Security Agency. This software may only be used and distributed | 
|  | according to the terms of the GNU General Public License as modified by SRC, | 
|  | incorporated herein by reference. | 
|  |  | 
|  | The author may be reached as becker@scyld.com, or C/O | 
|  | Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403 | 
|  |  | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/gfp.h> | 
|  |  | 
|  | #include <asm/io.h> | 
|  | #include <asm/dma.h> | 
|  | #include <asm/pgtable.h> | 
|  | #include <asm/cacheflush.h> | 
|  |  | 
|  | static char version[] __initdata = | 
|  | "82596.c $Revision: 1.5 $\n"; | 
|  |  | 
|  | #define DRV_NAME	"82596" | 
|  |  | 
|  | /* DEBUG flags | 
|  | */ | 
|  |  | 
|  | #define DEB_INIT	0x0001 | 
|  | #define DEB_PROBE	0x0002 | 
|  | #define DEB_SERIOUS	0x0004 | 
|  | #define DEB_ERRORS	0x0008 | 
|  | #define DEB_MULTI	0x0010 | 
|  | #define DEB_TDR		0x0020 | 
|  | #define DEB_OPEN	0x0040 | 
|  | #define DEB_RESET	0x0080 | 
|  | #define DEB_ADDCMD	0x0100 | 
|  | #define DEB_STATUS	0x0200 | 
|  | #define DEB_STARTTX	0x0400 | 
|  | #define DEB_RXADDR	0x0800 | 
|  | #define DEB_TXADDR	0x1000 | 
|  | #define DEB_RXFRAME	0x2000 | 
|  | #define DEB_INTS	0x4000 | 
|  | #define DEB_STRUCT	0x8000 | 
|  | #define DEB_ANY		0xffff | 
|  |  | 
|  |  | 
|  | #define DEB(x,y)	if (i596_debug & (x)) y | 
|  |  | 
|  |  | 
|  | #if defined(CONFIG_MVME16x_NET) || defined(CONFIG_MVME16x_NET_MODULE) | 
|  | #define ENABLE_MVME16x_NET | 
|  | #endif | 
|  | #if defined(CONFIG_BVME6000_NET) || defined(CONFIG_BVME6000_NET_MODULE) | 
|  | #define ENABLE_BVME6000_NET | 
|  | #endif | 
|  |  | 
|  | #ifdef ENABLE_MVME16x_NET | 
|  | #include <asm/mvme16xhw.h> | 
|  | #endif | 
|  | #ifdef ENABLE_BVME6000_NET | 
|  | #include <asm/bvme6000hw.h> | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Define various macros for Channel Attention, word swapping etc., dependent | 
|  | * on architecture.  MVME and BVME are 680x0 based, otherwise it is Intel. | 
|  | */ | 
|  |  | 
|  | #ifdef __mc68000__ | 
|  | #define WSWAPrfd(x)  ((struct i596_rfd *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) | 
|  | #define WSWAPrbd(x)  ((struct i596_rbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) | 
|  | #define WSWAPiscp(x) ((struct i596_iscp *)(((u32)(x)<<16) | ((((u32)(x)))>>16))) | 
|  | #define WSWAPscb(x)  ((struct i596_scb *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) | 
|  | #define WSWAPcmd(x)  ((struct i596_cmd *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) | 
|  | #define WSWAPtbd(x)  ((struct i596_tbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) | 
|  | #define WSWAPchar(x) ((char *)            (((u32)(x)<<16) | ((((u32)(x)))>>16))) | 
|  | #define ISCP_BUSY	0x00010000 | 
|  | #else | 
|  | #error 82596.c: unknown architecture | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * These were the intel versions, left here for reference. There | 
|  | * are currently no x86 users of this legacy i82596 chip. | 
|  | */ | 
|  | #if 0 | 
|  | #define WSWAPrfd(x)     ((struct i596_rfd *)((long)x)) | 
|  | #define WSWAPrbd(x)     ((struct i596_rbd *)((long)x)) | 
|  | #define WSWAPiscp(x)    ((struct i596_iscp *)((long)x)) | 
|  | #define WSWAPscb(x)     ((struct i596_scb *)((long)x)) | 
|  | #define WSWAPcmd(x)     ((struct i596_cmd *)((long)x)) | 
|  | #define WSWAPtbd(x)     ((struct i596_tbd *)((long)x)) | 
|  | #define WSWAPchar(x)    ((char *)((long)x)) | 
|  | #define ISCP_BUSY	0x0001 | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * The MPU_PORT command allows direct access to the 82596. With PORT access | 
|  | * the following commands are available (p5-18). The 32-bit port command | 
|  | * must be word-swapped with the most significant word written first. | 
|  | * This only applies to VME boards. | 
|  | */ | 
|  | #define PORT_RESET		0x00	/* reset 82596 */ | 
|  | #define PORT_SELFTEST		0x01	/* selftest */ | 
|  | #define PORT_ALTSCP		0x02	/* alternate SCB address */ | 
|  | #define PORT_ALTDUMP		0x03	/* Alternate DUMP address */ | 
|  |  | 
|  | static int i596_debug = (DEB_SERIOUS|DEB_PROBE); | 
|  |  | 
|  | MODULE_AUTHOR("Richard Hirst"); | 
|  | MODULE_DESCRIPTION("i82596 driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | module_param(i596_debug, int, 0); | 
|  | MODULE_PARM_DESC(i596_debug, "i82596 debug mask"); | 
|  |  | 
|  |  | 
|  | /* Copy frames shorter than rx_copybreak, otherwise pass on up in | 
|  | * a full sized sk_buff.  Value of 100 stolen from tulip.c (!alpha). | 
|  | */ | 
|  | static int rx_copybreak = 100; | 
|  |  | 
|  | #define PKT_BUF_SZ	1536 | 
|  | #define MAX_MC_CNT	64 | 
|  |  | 
|  | #define I596_TOTAL_SIZE 17 | 
|  |  | 
|  | #define I596_NULL ((void *)0xffffffff) | 
|  |  | 
|  | #define CMD_EOL		0x8000	/* The last command of the list, stop. */ | 
|  | #define CMD_SUSP	0x4000	/* Suspend after doing cmd. */ | 
|  | #define CMD_INTR	0x2000	/* Interrupt after doing cmd. */ | 
|  |  | 
|  | #define CMD_FLEX	0x0008	/* Enable flexible memory model */ | 
|  |  | 
|  | enum commands { | 
|  | CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3, | 
|  | CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7 | 
|  | }; | 
|  |  | 
|  | #define STAT_C		0x8000	/* Set to 0 after execution */ | 
|  | #define STAT_B		0x4000	/* Command being executed */ | 
|  | #define STAT_OK		0x2000	/* Command executed ok */ | 
|  | #define STAT_A		0x1000	/* Command aborted */ | 
|  |  | 
|  | #define	 CUC_START	0x0100 | 
|  | #define	 CUC_RESUME	0x0200 | 
|  | #define	 CUC_SUSPEND    0x0300 | 
|  | #define	 CUC_ABORT	0x0400 | 
|  | #define	 RX_START	0x0010 | 
|  | #define	 RX_RESUME	0x0020 | 
|  | #define	 RX_SUSPEND	0x0030 | 
|  | #define	 RX_ABORT	0x0040 | 
|  |  | 
|  | #define TX_TIMEOUT	(HZ/20) | 
|  |  | 
|  |  | 
|  | struct i596_reg { | 
|  | unsigned short porthi; | 
|  | unsigned short portlo; | 
|  | unsigned long ca; | 
|  | }; | 
|  |  | 
|  | #define EOF		0x8000 | 
|  | #define SIZE_MASK	0x3fff | 
|  |  | 
|  | struct i596_tbd { | 
|  | unsigned short size; | 
|  | unsigned short pad; | 
|  | struct i596_tbd *next; | 
|  | char *data; | 
|  | }; | 
|  |  | 
|  | /* The command structure has two 'next' pointers; v_next is the address of | 
|  | * the next command as seen by the CPU, b_next is the address of the next | 
|  | * command as seen by the 82596.  The b_next pointer, as used by the 82596 | 
|  | * always references the status field of the next command, rather than the | 
|  | * v_next field, because the 82596 is unaware of v_next.  It may seem more | 
|  | * logical to put v_next at the end of the structure, but we cannot do that | 
|  | * because the 82596 expects other fields to be there, depending on command | 
|  | * type. | 
|  | */ | 
|  |  | 
|  | struct i596_cmd { | 
|  | struct i596_cmd *v_next;	/* Address from CPUs viewpoint */ | 
|  | unsigned short status; | 
|  | unsigned short command; | 
|  | struct i596_cmd *b_next;	/* Address from i596 viewpoint */ | 
|  | }; | 
|  |  | 
|  | struct tx_cmd { | 
|  | struct i596_cmd cmd; | 
|  | struct i596_tbd *tbd; | 
|  | unsigned short size; | 
|  | unsigned short pad; | 
|  | struct sk_buff *skb;	/* So we can free it after tx */ | 
|  | }; | 
|  |  | 
|  | struct tdr_cmd { | 
|  | struct i596_cmd cmd; | 
|  | unsigned short status; | 
|  | unsigned short pad; | 
|  | }; | 
|  |  | 
|  | struct mc_cmd { | 
|  | struct i596_cmd cmd; | 
|  | short mc_cnt; | 
|  | char mc_addrs[MAX_MC_CNT*6]; | 
|  | }; | 
|  |  | 
|  | struct sa_cmd { | 
|  | struct i596_cmd cmd; | 
|  | char eth_addr[8]; | 
|  | }; | 
|  |  | 
|  | struct cf_cmd { | 
|  | struct i596_cmd cmd; | 
|  | char i596_config[16]; | 
|  | }; | 
|  |  | 
|  | struct i596_rfd { | 
|  | unsigned short stat; | 
|  | unsigned short cmd; | 
|  | struct i596_rfd *b_next;	/* Address from i596 viewpoint */ | 
|  | struct i596_rbd *rbd; | 
|  | unsigned short count; | 
|  | unsigned short size; | 
|  | struct i596_rfd *v_next;	/* Address from CPUs viewpoint */ | 
|  | struct i596_rfd *v_prev; | 
|  | }; | 
|  |  | 
|  | struct i596_rbd { | 
|  | unsigned short count; | 
|  | unsigned short zero1; | 
|  | struct i596_rbd *b_next; | 
|  | unsigned char *b_data;		/* Address from i596 viewpoint */ | 
|  | unsigned short size; | 
|  | unsigned short zero2; | 
|  | struct sk_buff *skb; | 
|  | struct i596_rbd *v_next; | 
|  | struct i596_rbd *b_addr;		/* This rbd addr from i596 view */ | 
|  | unsigned char *v_data;		/* Address from CPUs viewpoint */ | 
|  | }; | 
|  |  | 
|  | #define TX_RING_SIZE 64 | 
|  | #define RX_RING_SIZE 16 | 
|  |  | 
|  | struct i596_scb { | 
|  | unsigned short status; | 
|  | unsigned short command; | 
|  | struct i596_cmd *cmd; | 
|  | struct i596_rfd *rfd; | 
|  | unsigned long crc_err; | 
|  | unsigned long align_err; | 
|  | unsigned long resource_err; | 
|  | unsigned long over_err; | 
|  | unsigned long rcvdt_err; | 
|  | unsigned long short_err; | 
|  | unsigned short t_on; | 
|  | unsigned short t_off; | 
|  | }; | 
|  |  | 
|  | struct i596_iscp { | 
|  | unsigned long stat; | 
|  | struct i596_scb *scb; | 
|  | }; | 
|  |  | 
|  | struct i596_scp { | 
|  | unsigned long sysbus; | 
|  | unsigned long pad; | 
|  | struct i596_iscp *iscp; | 
|  | }; | 
|  |  | 
|  | struct i596_private { | 
|  | volatile struct i596_scp scp; | 
|  | volatile struct i596_iscp iscp; | 
|  | volatile struct i596_scb scb; | 
|  | struct sa_cmd sa_cmd; | 
|  | struct cf_cmd cf_cmd; | 
|  | struct tdr_cmd tdr_cmd; | 
|  | struct mc_cmd mc_cmd; | 
|  | unsigned long stat; | 
|  | int last_restart __attribute__((aligned(4))); | 
|  | struct i596_rfd *rfd_head; | 
|  | struct i596_rbd *rbd_head; | 
|  | struct i596_cmd *cmd_tail; | 
|  | struct i596_cmd *cmd_head; | 
|  | int cmd_backlog; | 
|  | unsigned long last_cmd; | 
|  | struct i596_rfd rfds[RX_RING_SIZE]; | 
|  | struct i596_rbd rbds[RX_RING_SIZE]; | 
|  | struct tx_cmd tx_cmds[TX_RING_SIZE]; | 
|  | struct i596_tbd tbds[TX_RING_SIZE]; | 
|  | int next_tx_cmd; | 
|  | spinlock_t lock; | 
|  | }; | 
|  |  | 
|  | static char init_setup[] = | 
|  | { | 
|  | 0x8E,			/* length, prefetch on */ | 
|  | 0xC8,			/* fifo to 8, monitor off */ | 
|  | #ifdef CONFIG_VME | 
|  | 0xc0,			/* don't save bad frames */ | 
|  | #else | 
|  | 0x80,			/* don't save bad frames */ | 
|  | #endif | 
|  | 0x2E,			/* No source address insertion, 8 byte preamble */ | 
|  | 0x00,			/* priority and backoff defaults */ | 
|  | 0x60,			/* interframe spacing */ | 
|  | 0x00,			/* slot time LSB */ | 
|  | 0xf2,			/* slot time and retries */ | 
|  | 0x00,			/* promiscuous mode */ | 
|  | 0x00,			/* collision detect */ | 
|  | 0x40,			/* minimum frame length */ | 
|  | 0xff, | 
|  | 0x00, | 
|  | 0x7f /*  *multi IA */ }; | 
|  |  | 
|  | static int i596_open(struct net_device *dev); | 
|  | static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev); | 
|  | static irqreturn_t i596_interrupt(int irq, void *dev_id); | 
|  | static int i596_close(struct net_device *dev); | 
|  | static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd); | 
|  | static void i596_tx_timeout (struct net_device *dev); | 
|  | static void print_eth(unsigned char *buf, char *str); | 
|  | static void set_multicast_list(struct net_device *dev); | 
|  |  | 
|  | static int rx_ring_size = RX_RING_SIZE; | 
|  | static int ticks_limit = 25; | 
|  | static int max_cmd_backlog = TX_RING_SIZE-1; | 
|  |  | 
|  |  | 
|  | static inline void CA(struct net_device *dev) | 
|  | { | 
|  | #ifdef ENABLE_MVME16x_NET | 
|  | if (MACH_IS_MVME16x) { | 
|  | ((struct i596_reg *) dev->base_addr)->ca = 1; | 
|  | } | 
|  | #endif | 
|  | #ifdef ENABLE_BVME6000_NET | 
|  | if (MACH_IS_BVME6000) { | 
|  | volatile u32 i; | 
|  |  | 
|  | i = *(volatile u32 *) (dev->base_addr); | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline void MPU_PORT(struct net_device *dev, int c, volatile void *x) | 
|  | { | 
|  | #ifdef ENABLE_MVME16x_NET | 
|  | if (MACH_IS_MVME16x) { | 
|  | struct i596_reg *p = (struct i596_reg *) (dev->base_addr); | 
|  | p->porthi = ((c) | (u32) (x)) & 0xffff; | 
|  | p->portlo = ((c) | (u32) (x)) >> 16; | 
|  | } | 
|  | #endif | 
|  | #ifdef ENABLE_BVME6000_NET | 
|  | if (MACH_IS_BVME6000) { | 
|  | u32 v = (u32) (c) | (u32) (x); | 
|  | v = ((u32) (v) << 16) | ((u32) (v) >> 16); | 
|  | *(volatile u32 *) dev->base_addr = v; | 
|  | udelay(1); | 
|  | *(volatile u32 *) dev->base_addr = v; | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline int wait_istat(struct net_device *dev, struct i596_private *lp, int delcnt, char *str) | 
|  | { | 
|  | while (--delcnt && lp->iscp.stat) | 
|  | udelay(10); | 
|  | if (!delcnt) { | 
|  | printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n", | 
|  | dev->name, str, lp->scb.status, lp->scb.command); | 
|  | return -1; | 
|  | } | 
|  | else | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline int wait_cmd(struct net_device *dev, struct i596_private *lp, int delcnt, char *str) | 
|  | { | 
|  | while (--delcnt && lp->scb.command) | 
|  | udelay(10); | 
|  | if (!delcnt) { | 
|  | printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n", | 
|  | dev->name, str, lp->scb.status, lp->scb.command); | 
|  | return -1; | 
|  | } | 
|  | else | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline int wait_cfg(struct net_device *dev, struct i596_cmd *cmd, int delcnt, char *str) | 
|  | { | 
|  | volatile struct i596_cmd *c = cmd; | 
|  |  | 
|  | while (--delcnt && c->command) | 
|  | udelay(10); | 
|  | if (!delcnt) { | 
|  | printk(KERN_ERR "%s: %s.\n", dev->name, str); | 
|  | return -1; | 
|  | } | 
|  | else | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void i596_display_data(struct net_device *dev) | 
|  | { | 
|  | struct i596_private *lp = dev->ml_priv; | 
|  | struct i596_cmd *cmd; | 
|  | struct i596_rfd *rfd; | 
|  | struct i596_rbd *rbd; | 
|  |  | 
|  | printk(KERN_ERR "lp and scp at %p, .sysbus = %08lx, .iscp = %p\n", | 
|  | &lp->scp, lp->scp.sysbus, lp->scp.iscp); | 
|  | printk(KERN_ERR "iscp at %p, iscp.stat = %08lx, .scb = %p\n", | 
|  | &lp->iscp, lp->iscp.stat, lp->iscp.scb); | 
|  | printk(KERN_ERR "scb at %p, scb.status = %04x, .command = %04x," | 
|  | " .cmd = %p, .rfd = %p\n", | 
|  | &lp->scb, lp->scb.status, lp->scb.command, | 
|  | lp->scb.cmd, lp->scb.rfd); | 
|  | printk(KERN_ERR "   errors: crc %lx, align %lx, resource %lx," | 
|  | " over %lx, rcvdt %lx, short %lx\n", | 
|  | lp->scb.crc_err, lp->scb.align_err, lp->scb.resource_err, | 
|  | lp->scb.over_err, lp->scb.rcvdt_err, lp->scb.short_err); | 
|  | cmd = lp->cmd_head; | 
|  | while (cmd != I596_NULL) { | 
|  | printk(KERN_ERR "cmd at %p, .status = %04x, .command = %04x, .b_next = %p\n", | 
|  | cmd, cmd->status, cmd->command, cmd->b_next); | 
|  | cmd = cmd->v_next; | 
|  | } | 
|  | rfd = lp->rfd_head; | 
|  | printk(KERN_ERR "rfd_head = %p\n", rfd); | 
|  | do { | 
|  | printk(KERN_ERR "   %p .stat %04x, .cmd %04x, b_next %p, rbd %p," | 
|  | " count %04x\n", | 
|  | rfd, rfd->stat, rfd->cmd, rfd->b_next, rfd->rbd, | 
|  | rfd->count); | 
|  | rfd = rfd->v_next; | 
|  | } while (rfd != lp->rfd_head); | 
|  | rbd = lp->rbd_head; | 
|  | printk(KERN_ERR "rbd_head = %p\n", rbd); | 
|  | do { | 
|  | printk(KERN_ERR "   %p .count %04x, b_next %p, b_data %p, size %04x\n", | 
|  | rbd, rbd->count, rbd->b_next, rbd->b_data, rbd->size); | 
|  | rbd = rbd->v_next; | 
|  | } while (rbd != lp->rbd_head); | 
|  | } | 
|  |  | 
|  |  | 
|  | #if defined(ENABLE_MVME16x_NET) || defined(ENABLE_BVME6000_NET) | 
|  | static irqreturn_t i596_error(int irq, void *dev_id) | 
|  | { | 
|  | struct net_device *dev = dev_id; | 
|  | #ifdef ENABLE_MVME16x_NET | 
|  | if (MACH_IS_MVME16x) { | 
|  | volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000; | 
|  |  | 
|  | pcc2[0x28] = 1; | 
|  | pcc2[0x2b] = 0x1d; | 
|  | } | 
|  | #endif | 
|  | #ifdef ENABLE_BVME6000_NET | 
|  | if (MACH_IS_BVME6000) { | 
|  | volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG; | 
|  |  | 
|  | *ethirq = 1; | 
|  | *ethirq = 3; | 
|  | } | 
|  | #endif | 
|  | printk(KERN_ERR "%s: Error interrupt\n", dev->name); | 
|  | i596_display_data(dev); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static inline void remove_rx_bufs(struct net_device *dev) | 
|  | { | 
|  | struct i596_private *lp = dev->ml_priv; | 
|  | struct i596_rbd *rbd; | 
|  | int i; | 
|  |  | 
|  | for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) { | 
|  | if (rbd->skb == NULL) | 
|  | break; | 
|  | dev_kfree_skb(rbd->skb); | 
|  | rbd->skb = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline int init_rx_bufs(struct net_device *dev) | 
|  | { | 
|  | struct i596_private *lp = dev->ml_priv; | 
|  | int i; | 
|  | struct i596_rfd *rfd; | 
|  | struct i596_rbd *rbd; | 
|  |  | 
|  | /* First build the Receive Buffer Descriptor List */ | 
|  |  | 
|  | for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) { | 
|  | struct sk_buff *skb = netdev_alloc_skb(dev, PKT_BUF_SZ); | 
|  |  | 
|  | if (skb == NULL) { | 
|  | remove_rx_bufs(dev); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | rbd->v_next = rbd+1; | 
|  | rbd->b_next = WSWAPrbd(virt_to_bus(rbd+1)); | 
|  | rbd->b_addr = WSWAPrbd(virt_to_bus(rbd)); | 
|  | rbd->skb = skb; | 
|  | rbd->v_data = skb->data; | 
|  | rbd->b_data = WSWAPchar(virt_to_bus(skb->data)); | 
|  | rbd->size = PKT_BUF_SZ; | 
|  | #ifdef __mc68000__ | 
|  | cache_clear(virt_to_phys(skb->data), PKT_BUF_SZ); | 
|  | #endif | 
|  | } | 
|  | lp->rbd_head = lp->rbds; | 
|  | rbd = lp->rbds + rx_ring_size - 1; | 
|  | rbd->v_next = lp->rbds; | 
|  | rbd->b_next = WSWAPrbd(virt_to_bus(lp->rbds)); | 
|  |  | 
|  | /* Now build the Receive Frame Descriptor List */ | 
|  |  | 
|  | for (i = 0, rfd = lp->rfds; i < rx_ring_size; i++, rfd++) { | 
|  | rfd->rbd = I596_NULL; | 
|  | rfd->v_next = rfd+1; | 
|  | rfd->v_prev = rfd-1; | 
|  | rfd->b_next = WSWAPrfd(virt_to_bus(rfd+1)); | 
|  | rfd->cmd = CMD_FLEX; | 
|  | } | 
|  | lp->rfd_head = lp->rfds; | 
|  | lp->scb.rfd = WSWAPrfd(virt_to_bus(lp->rfds)); | 
|  | rfd = lp->rfds; | 
|  | rfd->rbd = lp->rbd_head; | 
|  | rfd->v_prev = lp->rfds + rx_ring_size - 1; | 
|  | rfd = lp->rfds + rx_ring_size - 1; | 
|  | rfd->v_next = lp->rfds; | 
|  | rfd->b_next = WSWAPrfd(virt_to_bus(lp->rfds)); | 
|  | rfd->cmd = CMD_EOL|CMD_FLEX; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void rebuild_rx_bufs(struct net_device *dev) | 
|  | { | 
|  | struct i596_private *lp = dev->ml_priv; | 
|  | int i; | 
|  |  | 
|  | /* Ensure rx frame/buffer descriptors are tidy */ | 
|  |  | 
|  | for (i = 0; i < rx_ring_size; i++) { | 
|  | lp->rfds[i].rbd = I596_NULL; | 
|  | lp->rfds[i].cmd = CMD_FLEX; | 
|  | } | 
|  | lp->rfds[rx_ring_size-1].cmd = CMD_EOL|CMD_FLEX; | 
|  | lp->rfd_head = lp->rfds; | 
|  | lp->scb.rfd = WSWAPrfd(virt_to_bus(lp->rfds)); | 
|  | lp->rbd_head = lp->rbds; | 
|  | lp->rfds[0].rbd = WSWAPrbd(virt_to_bus(lp->rbds)); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int init_i596_mem(struct net_device *dev) | 
|  | { | 
|  | struct i596_private *lp = dev->ml_priv; | 
|  | unsigned long flags; | 
|  |  | 
|  | MPU_PORT(dev, PORT_RESET, NULL); | 
|  |  | 
|  | udelay(100);		/* Wait 100us - seems to help */ | 
|  |  | 
|  | #if defined(ENABLE_MVME16x_NET) || defined(ENABLE_BVME6000_NET) | 
|  | #ifdef ENABLE_MVME16x_NET | 
|  | if (MACH_IS_MVME16x) { | 
|  | volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000; | 
|  |  | 
|  | /* Disable all ints for now */ | 
|  | pcc2[0x28] = 1; | 
|  | pcc2[0x2a] = 0x48; | 
|  | /* Following disables snooping.  Snooping is not required | 
|  | * as we make appropriate use of non-cached pages for | 
|  | * shared data, and cache_push/cache_clear. | 
|  | */ | 
|  | pcc2[0x2b] = 0x08; | 
|  | } | 
|  | #endif | 
|  | #ifdef ENABLE_BVME6000_NET | 
|  | if (MACH_IS_BVME6000) { | 
|  | volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG; | 
|  |  | 
|  | *ethirq = 1; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* change the scp address */ | 
|  |  | 
|  | MPU_PORT(dev, PORT_ALTSCP, (void *)virt_to_bus((void *)&lp->scp)); | 
|  |  | 
|  | #endif | 
|  |  | 
|  | lp->last_cmd = jiffies; | 
|  |  | 
|  | #ifdef ENABLE_MVME16x_NET | 
|  | if (MACH_IS_MVME16x) | 
|  | lp->scp.sysbus = 0x00000054; | 
|  | #endif | 
|  | #ifdef ENABLE_BVME6000_NET | 
|  | if (MACH_IS_BVME6000) | 
|  | lp->scp.sysbus = 0x0000004c; | 
|  | #endif | 
|  |  | 
|  | lp->scp.iscp = WSWAPiscp(virt_to_bus((void *)&lp->iscp)); | 
|  | lp->iscp.scb = WSWAPscb(virt_to_bus((void *)&lp->scb)); | 
|  | lp->iscp.stat = ISCP_BUSY; | 
|  | lp->cmd_backlog = 0; | 
|  |  | 
|  | lp->cmd_head = lp->scb.cmd = I596_NULL; | 
|  |  | 
|  | #ifdef ENABLE_BVME6000_NET | 
|  | if (MACH_IS_BVME6000) { | 
|  | lp->scb.t_on  = 7 * 25; | 
|  | lp->scb.t_off = 1 * 25; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | DEB(DEB_INIT,printk(KERN_DEBUG "%s: starting i82596.\n", dev->name)); | 
|  |  | 
|  | CA(dev); | 
|  |  | 
|  | if (wait_istat(dev,lp,1000,"initialization timed out")) | 
|  | goto failed; | 
|  | DEB(DEB_INIT,printk(KERN_DEBUG "%s: i82596 initialization successful\n", dev->name)); | 
|  |  | 
|  | /* Ensure rx frame/buffer descriptors are tidy */ | 
|  | rebuild_rx_bufs(dev); | 
|  | lp->scb.command = 0; | 
|  |  | 
|  | #ifdef ENABLE_MVME16x_NET | 
|  | if (MACH_IS_MVME16x) { | 
|  | volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000; | 
|  |  | 
|  | /* Enable ints, etc. now */ | 
|  | pcc2[0x2a] = 0x55;	/* Edge sensitive */ | 
|  | pcc2[0x2b] = 0x15; | 
|  | } | 
|  | #endif | 
|  | #ifdef ENABLE_BVME6000_NET | 
|  | if (MACH_IS_BVME6000) { | 
|  | volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG; | 
|  |  | 
|  | *ethirq = 3; | 
|  | } | 
|  | #endif | 
|  |  | 
|  |  | 
|  | DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdConfigure\n", dev->name)); | 
|  | memcpy(lp->cf_cmd.i596_config, init_setup, 14); | 
|  | lp->cf_cmd.cmd.command = CmdConfigure; | 
|  | i596_add_cmd(dev, &lp->cf_cmd.cmd); | 
|  |  | 
|  | DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name)); | 
|  | memcpy(lp->sa_cmd.eth_addr, dev->dev_addr, 6); | 
|  | lp->sa_cmd.cmd.command = CmdSASetup; | 
|  | i596_add_cmd(dev, &lp->sa_cmd.cmd); | 
|  |  | 
|  | DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name)); | 
|  | lp->tdr_cmd.cmd.command = CmdTDR; | 
|  | i596_add_cmd(dev, &lp->tdr_cmd.cmd); | 
|  |  | 
|  | spin_lock_irqsave (&lp->lock, flags); | 
|  |  | 
|  | if (wait_cmd(dev,lp,1000,"timed out waiting to issue RX_START")) { | 
|  | spin_unlock_irqrestore (&lp->lock, flags); | 
|  | goto failed; | 
|  | } | 
|  | DEB(DEB_INIT,printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name)); | 
|  | lp->scb.command = RX_START; | 
|  | CA(dev); | 
|  |  | 
|  | spin_unlock_irqrestore (&lp->lock, flags); | 
|  |  | 
|  | if (wait_cmd(dev,lp,1000,"RX_START not processed")) | 
|  | goto failed; | 
|  | DEB(DEB_INIT,printk(KERN_DEBUG "%s: Receive unit started OK\n", dev->name)); | 
|  | return 0; | 
|  |  | 
|  | failed: | 
|  | printk(KERN_CRIT "%s: Failed to initialise 82596\n", dev->name); | 
|  | MPU_PORT(dev, PORT_RESET, NULL); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static inline int i596_rx(struct net_device *dev) | 
|  | { | 
|  | struct i596_private *lp = dev->ml_priv; | 
|  | struct i596_rfd *rfd; | 
|  | struct i596_rbd *rbd; | 
|  | int frames = 0; | 
|  |  | 
|  | DEB(DEB_RXFRAME,printk(KERN_DEBUG "i596_rx(), rfd_head %p, rbd_head %p\n", | 
|  | lp->rfd_head, lp->rbd_head)); | 
|  |  | 
|  | rfd = lp->rfd_head;		/* Ref next frame to check */ | 
|  |  | 
|  | while ((rfd->stat) & STAT_C) {	/* Loop while complete frames */ | 
|  | if (rfd->rbd == I596_NULL) | 
|  | rbd = I596_NULL; | 
|  | else if (rfd->rbd == lp->rbd_head->b_addr) | 
|  | rbd = lp->rbd_head; | 
|  | else { | 
|  | printk(KERN_CRIT "%s: rbd chain broken!\n", dev->name); | 
|  | /* XXX Now what? */ | 
|  | rbd = I596_NULL; | 
|  | } | 
|  | DEB(DEB_RXFRAME, printk(KERN_DEBUG "  rfd %p, rfd.rbd %p, rfd.stat %04x\n", | 
|  | rfd, rfd->rbd, rfd->stat)); | 
|  |  | 
|  | if (rbd != I596_NULL && ((rfd->stat) & STAT_OK)) { | 
|  | /* a good frame */ | 
|  | int pkt_len = rbd->count & 0x3fff; | 
|  | struct sk_buff *skb = rbd->skb; | 
|  | int rx_in_place = 0; | 
|  |  | 
|  | DEB(DEB_RXADDR,print_eth(rbd->v_data, "received")); | 
|  | frames++; | 
|  |  | 
|  | /* Check if the packet is long enough to just accept | 
|  | * without copying to a properly sized skbuff. | 
|  | */ | 
|  |  | 
|  | if (pkt_len > rx_copybreak) { | 
|  | struct sk_buff *newskb; | 
|  |  | 
|  | /* Get fresh skbuff to replace filled one. */ | 
|  | newskb = netdev_alloc_skb(dev, PKT_BUF_SZ); | 
|  | if (newskb == NULL) { | 
|  | skb = NULL;	/* drop pkt */ | 
|  | goto memory_squeeze; | 
|  | } | 
|  | /* Pass up the skb already on the Rx ring. */ | 
|  | skb_put(skb, pkt_len); | 
|  | rx_in_place = 1; | 
|  | rbd->skb = newskb; | 
|  | rbd->v_data = newskb->data; | 
|  | rbd->b_data = WSWAPchar(virt_to_bus(newskb->data)); | 
|  | #ifdef __mc68000__ | 
|  | cache_clear(virt_to_phys(newskb->data), PKT_BUF_SZ); | 
|  | #endif | 
|  | } | 
|  | else | 
|  | skb = netdev_alloc_skb(dev, pkt_len + 2); | 
|  | memory_squeeze: | 
|  | if (skb == NULL) { | 
|  | /* XXX tulip.c can defer packets here!! */ | 
|  | printk(KERN_WARNING "%s: i596_rx Memory squeeze, dropping packet.\n", dev->name); | 
|  | dev->stats.rx_dropped++; | 
|  | } | 
|  | else { | 
|  | if (!rx_in_place) { | 
|  | /* 16 byte align the data fields */ | 
|  | skb_reserve(skb, 2); | 
|  | memcpy(skb_put(skb,pkt_len), rbd->v_data, pkt_len); | 
|  | } | 
|  | skb->protocol=eth_type_trans(skb,dev); | 
|  | skb->len = pkt_len; | 
|  | #ifdef __mc68000__ | 
|  | cache_clear(virt_to_phys(rbd->skb->data), | 
|  | pkt_len); | 
|  | #endif | 
|  | netif_rx(skb); | 
|  | dev->stats.rx_packets++; | 
|  | dev->stats.rx_bytes+=pkt_len; | 
|  | } | 
|  | } | 
|  | else { | 
|  | DEB(DEB_ERRORS, printk(KERN_DEBUG "%s: Error, rfd.stat = 0x%04x\n", | 
|  | dev->name, rfd->stat)); | 
|  | dev->stats.rx_errors++; | 
|  | if ((rfd->stat) & 0x0001) | 
|  | dev->stats.collisions++; | 
|  | if ((rfd->stat) & 0x0080) | 
|  | dev->stats.rx_length_errors++; | 
|  | if ((rfd->stat) & 0x0100) | 
|  | dev->stats.rx_over_errors++; | 
|  | if ((rfd->stat) & 0x0200) | 
|  | dev->stats.rx_fifo_errors++; | 
|  | if ((rfd->stat) & 0x0400) | 
|  | dev->stats.rx_frame_errors++; | 
|  | if ((rfd->stat) & 0x0800) | 
|  | dev->stats.rx_crc_errors++; | 
|  | if ((rfd->stat) & 0x1000) | 
|  | dev->stats.rx_length_errors++; | 
|  | } | 
|  |  | 
|  | /* Clear the buffer descriptor count and EOF + F flags */ | 
|  |  | 
|  | if (rbd != I596_NULL && (rbd->count & 0x4000)) { | 
|  | rbd->count = 0; | 
|  | lp->rbd_head = rbd->v_next; | 
|  | } | 
|  |  | 
|  | /* Tidy the frame descriptor, marking it as end of list */ | 
|  |  | 
|  | rfd->rbd = I596_NULL; | 
|  | rfd->stat = 0; | 
|  | rfd->cmd = CMD_EOL|CMD_FLEX; | 
|  | rfd->count = 0; | 
|  |  | 
|  | /* Remove end-of-list from old end descriptor */ | 
|  |  | 
|  | rfd->v_prev->cmd = CMD_FLEX; | 
|  |  | 
|  | /* Update record of next frame descriptor to process */ | 
|  |  | 
|  | lp->scb.rfd = rfd->b_next; | 
|  | lp->rfd_head = rfd->v_next; | 
|  | rfd = lp->rfd_head; | 
|  | } | 
|  |  | 
|  | DEB(DEB_RXFRAME,printk(KERN_DEBUG "frames %d\n", frames)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp) | 
|  | { | 
|  | struct i596_cmd *ptr; | 
|  |  | 
|  | while (lp->cmd_head != I596_NULL) { | 
|  | ptr = lp->cmd_head; | 
|  | lp->cmd_head = ptr->v_next; | 
|  | lp->cmd_backlog--; | 
|  |  | 
|  | switch ((ptr->command) & 0x7) { | 
|  | case CmdTx: | 
|  | { | 
|  | struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr; | 
|  | struct sk_buff *skb = tx_cmd->skb; | 
|  |  | 
|  | dev_kfree_skb(skb); | 
|  |  | 
|  | dev->stats.tx_errors++; | 
|  | dev->stats.tx_aborted_errors++; | 
|  |  | 
|  | ptr->v_next = ptr->b_next = I596_NULL; | 
|  | tx_cmd->cmd.command = 0;  /* Mark as free */ | 
|  | break; | 
|  | } | 
|  | default: | 
|  | ptr->v_next = ptr->b_next = I596_NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | wait_cmd(dev,lp,100,"i596_cleanup_cmd timed out"); | 
|  | lp->scb.cmd = I596_NULL; | 
|  | } | 
|  |  | 
|  | static void i596_reset(struct net_device *dev, struct i596_private *lp, | 
|  | int ioaddr) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | DEB(DEB_RESET,printk(KERN_DEBUG "i596_reset\n")); | 
|  |  | 
|  | spin_lock_irqsave (&lp->lock, flags); | 
|  |  | 
|  | wait_cmd(dev,lp,100,"i596_reset timed out"); | 
|  |  | 
|  | netif_stop_queue(dev); | 
|  |  | 
|  | lp->scb.command = CUC_ABORT | RX_ABORT; | 
|  | CA(dev); | 
|  |  | 
|  | /* wait for shutdown */ | 
|  | wait_cmd(dev,lp,1000,"i596_reset 2 timed out"); | 
|  | spin_unlock_irqrestore (&lp->lock, flags); | 
|  |  | 
|  | i596_cleanup_cmd(dev,lp); | 
|  | i596_rx(dev); | 
|  |  | 
|  | netif_start_queue(dev); | 
|  | init_i596_mem(dev); | 
|  | } | 
|  |  | 
|  | static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd) | 
|  | { | 
|  | struct i596_private *lp = dev->ml_priv; | 
|  | int ioaddr = dev->base_addr; | 
|  | unsigned long flags; | 
|  |  | 
|  | DEB(DEB_ADDCMD,printk(KERN_DEBUG "i596_add_cmd\n")); | 
|  |  | 
|  | cmd->status = 0; | 
|  | cmd->command |= (CMD_EOL | CMD_INTR); | 
|  | cmd->v_next = cmd->b_next = I596_NULL; | 
|  |  | 
|  | spin_lock_irqsave (&lp->lock, flags); | 
|  |  | 
|  | if (lp->cmd_head != I596_NULL) { | 
|  | lp->cmd_tail->v_next = cmd; | 
|  | lp->cmd_tail->b_next = WSWAPcmd(virt_to_bus(&cmd->status)); | 
|  | } else { | 
|  | lp->cmd_head = cmd; | 
|  | wait_cmd(dev,lp,100,"i596_add_cmd timed out"); | 
|  | lp->scb.cmd = WSWAPcmd(virt_to_bus(&cmd->status)); | 
|  | lp->scb.command = CUC_START; | 
|  | CA(dev); | 
|  | } | 
|  | lp->cmd_tail = cmd; | 
|  | lp->cmd_backlog++; | 
|  |  | 
|  | spin_unlock_irqrestore (&lp->lock, flags); | 
|  |  | 
|  | if (lp->cmd_backlog > max_cmd_backlog) { | 
|  | unsigned long tickssofar = jiffies - lp->last_cmd; | 
|  |  | 
|  | if (tickssofar < ticks_limit) | 
|  | return; | 
|  |  | 
|  | printk(KERN_NOTICE "%s: command unit timed out, status resetting.\n", dev->name); | 
|  |  | 
|  | i596_reset(dev, lp, ioaddr); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int i596_open(struct net_device *dev) | 
|  | { | 
|  | int res = 0; | 
|  |  | 
|  | DEB(DEB_OPEN,printk(KERN_DEBUG "%s: i596_open() irq %d.\n", dev->name, dev->irq)); | 
|  |  | 
|  | if (request_irq(dev->irq, i596_interrupt, 0, "i82596", dev)) { | 
|  | printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq); | 
|  | return -EAGAIN; | 
|  | } | 
|  | #ifdef ENABLE_MVME16x_NET | 
|  | if (MACH_IS_MVME16x) { | 
|  | if (request_irq(0x56, i596_error, 0, "i82596_error", dev)) { | 
|  | res = -EAGAIN; | 
|  | goto err_irq_dev; | 
|  | } | 
|  | } | 
|  | #endif | 
|  | res = init_rx_bufs(dev); | 
|  | if (res) | 
|  | goto err_irq_56; | 
|  |  | 
|  | netif_start_queue(dev); | 
|  |  | 
|  | if (init_i596_mem(dev)) { | 
|  | res = -EAGAIN; | 
|  | goto err_queue; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_queue: | 
|  | netif_stop_queue(dev); | 
|  | remove_rx_bufs(dev); | 
|  | err_irq_56: | 
|  | #ifdef ENABLE_MVME16x_NET | 
|  | free_irq(0x56, dev); | 
|  | err_irq_dev: | 
|  | #endif | 
|  | free_irq(dev->irq, dev); | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static void i596_tx_timeout (struct net_device *dev) | 
|  | { | 
|  | struct i596_private *lp = dev->ml_priv; | 
|  | int ioaddr = dev->base_addr; | 
|  |  | 
|  | /* Transmitter timeout, serious problems. */ | 
|  | DEB(DEB_ERRORS,printk(KERN_ERR "%s: transmit timed out, status resetting.\n", | 
|  | dev->name)); | 
|  |  | 
|  | dev->stats.tx_errors++; | 
|  |  | 
|  | /* Try to restart the adaptor */ | 
|  | if (lp->last_restart == dev->stats.tx_packets) { | 
|  | DEB(DEB_ERRORS,printk(KERN_ERR "Resetting board.\n")); | 
|  | /* Shutdown and restart */ | 
|  | i596_reset (dev, lp, ioaddr); | 
|  | } else { | 
|  | /* Issue a channel attention signal */ | 
|  | DEB(DEB_ERRORS,printk(KERN_ERR "Kicking board.\n")); | 
|  | lp->scb.command = CUC_START | RX_START; | 
|  | CA (dev); | 
|  | lp->last_restart = dev->stats.tx_packets; | 
|  | } | 
|  |  | 
|  | dev->trans_start = jiffies; /* prevent tx timeout */ | 
|  | netif_wake_queue (dev); | 
|  | } | 
|  |  | 
|  | static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev) | 
|  | { | 
|  | struct i596_private *lp = dev->ml_priv; | 
|  | struct tx_cmd *tx_cmd; | 
|  | struct i596_tbd *tbd; | 
|  | short length = skb->len; | 
|  |  | 
|  | DEB(DEB_STARTTX,printk(KERN_DEBUG "%s: i596_start_xmit(%x,%p) called\n", | 
|  | dev->name, skb->len, skb->data)); | 
|  |  | 
|  | if (skb->len < ETH_ZLEN) { | 
|  | if (skb_padto(skb, ETH_ZLEN)) | 
|  | return NETDEV_TX_OK; | 
|  | length = ETH_ZLEN; | 
|  | } | 
|  | netif_stop_queue(dev); | 
|  |  | 
|  | tx_cmd = lp->tx_cmds + lp->next_tx_cmd; | 
|  | tbd = lp->tbds + lp->next_tx_cmd; | 
|  |  | 
|  | if (tx_cmd->cmd.command) { | 
|  | printk(KERN_NOTICE "%s: xmit ring full, dropping packet.\n", | 
|  | dev->name); | 
|  | dev->stats.tx_dropped++; | 
|  |  | 
|  | dev_kfree_skb(skb); | 
|  | } else { | 
|  | if (++lp->next_tx_cmd == TX_RING_SIZE) | 
|  | lp->next_tx_cmd = 0; | 
|  | tx_cmd->tbd = WSWAPtbd(virt_to_bus(tbd)); | 
|  | tbd->next = I596_NULL; | 
|  |  | 
|  | tx_cmd->cmd.command = CMD_FLEX | CmdTx; | 
|  | tx_cmd->skb = skb; | 
|  |  | 
|  | tx_cmd->pad = 0; | 
|  | tx_cmd->size = 0; | 
|  | tbd->pad = 0; | 
|  | tbd->size = EOF | length; | 
|  |  | 
|  | tbd->data = WSWAPchar(virt_to_bus(skb->data)); | 
|  |  | 
|  | #ifdef __mc68000__ | 
|  | cache_push(virt_to_phys(skb->data), length); | 
|  | #endif | 
|  | DEB(DEB_TXADDR,print_eth(skb->data, "tx-queued")); | 
|  | i596_add_cmd(dev, &tx_cmd->cmd); | 
|  |  | 
|  | dev->stats.tx_packets++; | 
|  | dev->stats.tx_bytes += length; | 
|  | } | 
|  |  | 
|  | netif_start_queue(dev); | 
|  |  | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | static void print_eth(unsigned char *add, char *str) | 
|  | { | 
|  | printk(KERN_DEBUG "i596 0x%p, %pM --> %pM %02X%02X, %s\n", | 
|  | add, add + 6, add, add[12], add[13], str); | 
|  | } | 
|  |  | 
|  | static int io = 0x300; | 
|  | static int irq = 10; | 
|  |  | 
|  | static const struct net_device_ops i596_netdev_ops = { | 
|  | .ndo_open 		= i596_open, | 
|  | .ndo_stop		= i596_close, | 
|  | .ndo_start_xmit		= i596_start_xmit, | 
|  | .ndo_set_rx_mode	= set_multicast_list, | 
|  | .ndo_tx_timeout		= i596_tx_timeout, | 
|  | .ndo_change_mtu		= eth_change_mtu, | 
|  | .ndo_set_mac_address 	= eth_mac_addr, | 
|  | .ndo_validate_addr	= eth_validate_addr, | 
|  | }; | 
|  |  | 
|  | struct net_device * __init i82596_probe(int unit) | 
|  | { | 
|  | struct net_device *dev; | 
|  | int i; | 
|  | struct i596_private *lp; | 
|  | char eth_addr[8]; | 
|  | static int probed; | 
|  | int err; | 
|  |  | 
|  | if (probed) | 
|  | return ERR_PTR(-ENODEV); | 
|  | probed++; | 
|  |  | 
|  | dev = alloc_etherdev(0); | 
|  | if (!dev) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | if (unit >= 0) { | 
|  | sprintf(dev->name, "eth%d", unit); | 
|  | netdev_boot_setup_check(dev); | 
|  | } else { | 
|  | dev->base_addr = io; | 
|  | dev->irq = irq; | 
|  | } | 
|  |  | 
|  | #ifdef ENABLE_MVME16x_NET | 
|  | if (MACH_IS_MVME16x) { | 
|  | if (mvme16x_config & MVME16x_CONFIG_NO_ETHERNET) { | 
|  | printk(KERN_NOTICE "Ethernet probe disabled - chip not present\n"); | 
|  | err = -ENODEV; | 
|  | goto out; | 
|  | } | 
|  | memcpy(eth_addr, (void *) 0xfffc1f2c, 6);	/* YUCK! Get addr from NOVRAM */ | 
|  | dev->base_addr = MVME_I596_BASE; | 
|  | dev->irq = (unsigned) MVME16x_IRQ_I596; | 
|  | goto found; | 
|  | } | 
|  | #endif | 
|  | #ifdef ENABLE_BVME6000_NET | 
|  | if (MACH_IS_BVME6000) { | 
|  | volatile unsigned char *rtc = (unsigned char *) BVME_RTC_BASE; | 
|  | unsigned char msr = rtc[3]; | 
|  | int i; | 
|  |  | 
|  | rtc[3] |= 0x80; | 
|  | for (i = 0; i < 6; i++) | 
|  | eth_addr[i] = rtc[i * 4 + 7];	/* Stored in RTC RAM at offset 1 */ | 
|  | rtc[3] = msr; | 
|  | dev->base_addr = BVME_I596_BASE; | 
|  | dev->irq = (unsigned) BVME_IRQ_I596; | 
|  | goto found; | 
|  | } | 
|  | #endif | 
|  | err = -ENODEV; | 
|  | goto out; | 
|  |  | 
|  | found: | 
|  | dev->mem_start = (int)__get_free_pages(GFP_ATOMIC, 0); | 
|  | if (!dev->mem_start) { | 
|  | err = -ENOMEM; | 
|  | goto out1; | 
|  | } | 
|  |  | 
|  | DEB(DEB_PROBE,printk(KERN_INFO "%s: 82596 at %#3lx,", dev->name, dev->base_addr)); | 
|  |  | 
|  | for (i = 0; i < 6; i++) | 
|  | DEB(DEB_PROBE,printk(" %2.2X", dev->dev_addr[i] = eth_addr[i])); | 
|  |  | 
|  | DEB(DEB_PROBE,printk(" IRQ %d.\n", dev->irq)); | 
|  |  | 
|  | DEB(DEB_PROBE,printk(KERN_INFO "%s", version)); | 
|  |  | 
|  | /* The 82596-specific entries in the device structure. */ | 
|  | dev->netdev_ops = &i596_netdev_ops; | 
|  | dev->watchdog_timeo = TX_TIMEOUT; | 
|  |  | 
|  | dev->ml_priv = (void *)(dev->mem_start); | 
|  |  | 
|  | lp = dev->ml_priv; | 
|  | DEB(DEB_INIT,printk(KERN_DEBUG "%s: lp at 0x%08lx (%zd bytes), " | 
|  | "lp->scb at 0x%08lx\n", | 
|  | dev->name, (unsigned long)lp, | 
|  | sizeof(struct i596_private), (unsigned long)&lp->scb)); | 
|  | memset((void *) lp, 0, sizeof(struct i596_private)); | 
|  |  | 
|  | #ifdef __mc68000__ | 
|  | cache_push(virt_to_phys((void *)(dev->mem_start)), 4096); | 
|  | cache_clear(virt_to_phys((void *)(dev->mem_start)), 4096); | 
|  | kernel_set_cachemode((void *)(dev->mem_start), 4096, IOMAP_NOCACHE_SER); | 
|  | #endif | 
|  | lp->scb.command = 0; | 
|  | lp->scb.cmd = I596_NULL; | 
|  | lp->scb.rfd = I596_NULL; | 
|  | spin_lock_init(&lp->lock); | 
|  |  | 
|  | err = register_netdev(dev); | 
|  | if (err) | 
|  | goto out2; | 
|  | return dev; | 
|  | out2: | 
|  | #ifdef __mc68000__ | 
|  | /* XXX This assumes default cache mode to be IOMAP_FULL_CACHING, | 
|  | * XXX which may be invalid (CONFIG_060_WRITETHROUGH) | 
|  | */ | 
|  | kernel_set_cachemode((void *)(dev->mem_start), 4096, | 
|  | IOMAP_FULL_CACHING); | 
|  | #endif | 
|  | free_page ((u32)(dev->mem_start)); | 
|  | out1: | 
|  | out: | 
|  | free_netdev(dev); | 
|  | return ERR_PTR(err); | 
|  | } | 
|  |  | 
|  | static irqreturn_t i596_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | struct net_device *dev = dev_id; | 
|  | struct i596_private *lp; | 
|  | short ioaddr; | 
|  | unsigned short status, ack_cmd = 0; | 
|  | int handled = 0; | 
|  |  | 
|  | #ifdef ENABLE_BVME6000_NET | 
|  | if (MACH_IS_BVME6000) { | 
|  | if (*(char *) BVME_LOCAL_IRQ_STAT & BVME_ETHERR) { | 
|  | i596_error(irq, dev_id); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  | } | 
|  | #endif | 
|  | if (dev == NULL) { | 
|  | printk(KERN_ERR "i596_interrupt(): irq %d for unknown device.\n", irq); | 
|  | return IRQ_NONE; | 
|  | } | 
|  |  | 
|  | ioaddr = dev->base_addr; | 
|  | lp = dev->ml_priv; | 
|  |  | 
|  | spin_lock (&lp->lock); | 
|  |  | 
|  | wait_cmd(dev,lp,100,"i596 interrupt, timeout"); | 
|  | status = lp->scb.status; | 
|  |  | 
|  | DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt, IRQ %d, status %4.4x.\n", | 
|  | dev->name, irq, status)); | 
|  |  | 
|  | ack_cmd = status & 0xf000; | 
|  |  | 
|  | if ((status & 0x8000) || (status & 0x2000)) { | 
|  | struct i596_cmd *ptr; | 
|  |  | 
|  | handled = 1; | 
|  | if ((status & 0x8000)) | 
|  | DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt completed command.\n", dev->name)); | 
|  | if ((status & 0x2000)) | 
|  | DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt command unit inactive %x.\n", dev->name, status & 0x0700)); | 
|  |  | 
|  | while ((lp->cmd_head != I596_NULL) && (lp->cmd_head->status & STAT_C)) { | 
|  | ptr = lp->cmd_head; | 
|  |  | 
|  | DEB(DEB_STATUS,printk(KERN_DEBUG "cmd_head->status = %04x, ->command = %04x\n", | 
|  | lp->cmd_head->status, lp->cmd_head->command)); | 
|  | lp->cmd_head = ptr->v_next; | 
|  | lp->cmd_backlog--; | 
|  |  | 
|  | switch ((ptr->command) & 0x7) { | 
|  | case CmdTx: | 
|  | { | 
|  | struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr; | 
|  | struct sk_buff *skb = tx_cmd->skb; | 
|  |  | 
|  | if ((ptr->status) & STAT_OK) { | 
|  | DEB(DEB_TXADDR,print_eth(skb->data, "tx-done")); | 
|  | } else { | 
|  | dev->stats.tx_errors++; | 
|  | if ((ptr->status) & 0x0020) | 
|  | dev->stats.collisions++; | 
|  | if (!((ptr->status) & 0x0040)) | 
|  | dev->stats.tx_heartbeat_errors++; | 
|  | if ((ptr->status) & 0x0400) | 
|  | dev->stats.tx_carrier_errors++; | 
|  | if ((ptr->status) & 0x0800) | 
|  | dev->stats.collisions++; | 
|  | if ((ptr->status) & 0x1000) | 
|  | dev->stats.tx_aborted_errors++; | 
|  | } | 
|  |  | 
|  | dev_kfree_skb_irq(skb); | 
|  |  | 
|  | tx_cmd->cmd.command = 0; /* Mark free */ | 
|  | break; | 
|  | } | 
|  | case CmdTDR: | 
|  | { | 
|  | unsigned short status = ((struct tdr_cmd *)ptr)->status; | 
|  |  | 
|  | if (status & 0x8000) { | 
|  | DEB(DEB_TDR,printk(KERN_INFO "%s: link ok.\n", dev->name)); | 
|  | } else { | 
|  | if (status & 0x4000) | 
|  | printk(KERN_ERR "%s: Transceiver problem.\n", dev->name); | 
|  | if (status & 0x2000) | 
|  | printk(KERN_ERR "%s: Termination problem.\n", dev->name); | 
|  | if (status & 0x1000) | 
|  | printk(KERN_ERR "%s: Short circuit.\n", dev->name); | 
|  |  | 
|  | DEB(DEB_TDR,printk(KERN_INFO "%s: Time %d.\n", dev->name, status & 0x07ff)); | 
|  | } | 
|  | break; | 
|  | } | 
|  | case CmdConfigure: | 
|  | case CmdMulticastList: | 
|  | /* Zap command so set_multicast_list() knows it is free */ | 
|  | ptr->command = 0; | 
|  | break; | 
|  | } | 
|  | ptr->v_next = ptr->b_next = I596_NULL; | 
|  | lp->last_cmd = jiffies; | 
|  | } | 
|  |  | 
|  | ptr = lp->cmd_head; | 
|  | while ((ptr != I596_NULL) && (ptr != lp->cmd_tail)) { | 
|  | ptr->command &= 0x1fff; | 
|  | ptr = ptr->v_next; | 
|  | } | 
|  |  | 
|  | if ((lp->cmd_head != I596_NULL)) | 
|  | ack_cmd |= CUC_START; | 
|  | lp->scb.cmd = WSWAPcmd(virt_to_bus(&lp->cmd_head->status)); | 
|  | } | 
|  | if ((status & 0x1000) || (status & 0x4000)) { | 
|  | if ((status & 0x4000)) | 
|  | DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt received a frame.\n", dev->name)); | 
|  | i596_rx(dev); | 
|  | /* Only RX_START if stopped - RGH 07-07-96 */ | 
|  | if (status & 0x1000) { | 
|  | if (netif_running(dev)) { | 
|  | DEB(DEB_ERRORS,printk(KERN_ERR "%s: i596 interrupt receive unit inactive, status 0x%x\n", dev->name, status)); | 
|  | ack_cmd |= RX_START; | 
|  | dev->stats.rx_errors++; | 
|  | dev->stats.rx_fifo_errors++; | 
|  | rebuild_rx_bufs(dev); | 
|  | } | 
|  | } | 
|  | } | 
|  | wait_cmd(dev,lp,100,"i596 interrupt, timeout"); | 
|  | lp->scb.command = ack_cmd; | 
|  |  | 
|  | #ifdef ENABLE_MVME16x_NET | 
|  | if (MACH_IS_MVME16x) { | 
|  | /* Ack the interrupt */ | 
|  |  | 
|  | volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000; | 
|  |  | 
|  | pcc2[0x2a] |= 0x08; | 
|  | } | 
|  | #endif | 
|  | #ifdef ENABLE_BVME6000_NET | 
|  | if (MACH_IS_BVME6000) { | 
|  | volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG; | 
|  |  | 
|  | *ethirq = 1; | 
|  | *ethirq = 3; | 
|  | } | 
|  | #endif | 
|  | CA(dev); | 
|  |  | 
|  | DEB(DEB_INTS,printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name)); | 
|  |  | 
|  | spin_unlock (&lp->lock); | 
|  | return IRQ_RETVAL(handled); | 
|  | } | 
|  |  | 
|  | static int i596_close(struct net_device *dev) | 
|  | { | 
|  | struct i596_private *lp = dev->ml_priv; | 
|  | unsigned long flags; | 
|  |  | 
|  | netif_stop_queue(dev); | 
|  |  | 
|  | DEB(DEB_INIT,printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n", | 
|  | dev->name, lp->scb.status)); | 
|  |  | 
|  | spin_lock_irqsave(&lp->lock, flags); | 
|  |  | 
|  | wait_cmd(dev,lp,100,"close1 timed out"); | 
|  | lp->scb.command = CUC_ABORT | RX_ABORT; | 
|  | CA(dev); | 
|  |  | 
|  | wait_cmd(dev,lp,100,"close2 timed out"); | 
|  |  | 
|  | spin_unlock_irqrestore(&lp->lock, flags); | 
|  | DEB(DEB_STRUCT,i596_display_data(dev)); | 
|  | i596_cleanup_cmd(dev,lp); | 
|  |  | 
|  | #ifdef ENABLE_MVME16x_NET | 
|  | if (MACH_IS_MVME16x) { | 
|  | volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000; | 
|  |  | 
|  | /* Disable all ints */ | 
|  | pcc2[0x28] = 1; | 
|  | pcc2[0x2a] = 0x40; | 
|  | pcc2[0x2b] = 0x40;	/* Set snooping bits now! */ | 
|  | } | 
|  | #endif | 
|  | #ifdef ENABLE_BVME6000_NET | 
|  | if (MACH_IS_BVME6000) { | 
|  | volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG; | 
|  |  | 
|  | *ethirq = 1; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifdef ENABLE_MVME16x_NET | 
|  | free_irq(0x56, dev); | 
|  | #endif | 
|  | free_irq(dev->irq, dev); | 
|  | remove_rx_bufs(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *    Set or clear the multicast filter for this adaptor. | 
|  | */ | 
|  |  | 
|  | static void set_multicast_list(struct net_device *dev) | 
|  | { | 
|  | struct i596_private *lp = dev->ml_priv; | 
|  | int config = 0, cnt; | 
|  |  | 
|  | DEB(DEB_MULTI,printk(KERN_DEBUG "%s: set multicast list, %d entries, promisc %s, allmulti %s\n", | 
|  | dev->name, netdev_mc_count(dev), | 
|  | dev->flags & IFF_PROMISC  ? "ON" : "OFF", | 
|  | dev->flags & IFF_ALLMULTI ? "ON" : "OFF")); | 
|  |  | 
|  | if (wait_cfg(dev, &lp->cf_cmd.cmd, 1000, "config change request timed out")) | 
|  | return; | 
|  |  | 
|  | if ((dev->flags & IFF_PROMISC) && !(lp->cf_cmd.i596_config[8] & 0x01)) { | 
|  | lp->cf_cmd.i596_config[8] |= 0x01; | 
|  | config = 1; | 
|  | } | 
|  | if (!(dev->flags & IFF_PROMISC) && (lp->cf_cmd.i596_config[8] & 0x01)) { | 
|  | lp->cf_cmd.i596_config[8] &= ~0x01; | 
|  | config = 1; | 
|  | } | 
|  | if ((dev->flags & IFF_ALLMULTI) && (lp->cf_cmd.i596_config[11] & 0x20)) { | 
|  | lp->cf_cmd.i596_config[11] &= ~0x20; | 
|  | config = 1; | 
|  | } | 
|  | if (!(dev->flags & IFF_ALLMULTI) && !(lp->cf_cmd.i596_config[11] & 0x20)) { | 
|  | lp->cf_cmd.i596_config[11] |= 0x20; | 
|  | config = 1; | 
|  | } | 
|  | if (config) { | 
|  | lp->cf_cmd.cmd.command = CmdConfigure; | 
|  | i596_add_cmd(dev, &lp->cf_cmd.cmd); | 
|  | } | 
|  |  | 
|  | cnt = netdev_mc_count(dev); | 
|  | if (cnt > MAX_MC_CNT) | 
|  | { | 
|  | cnt = MAX_MC_CNT; | 
|  | printk(KERN_ERR "%s: Only %d multicast addresses supported", | 
|  | dev->name, cnt); | 
|  | } | 
|  |  | 
|  | if (!netdev_mc_empty(dev)) { | 
|  | struct netdev_hw_addr *ha; | 
|  | unsigned char *cp; | 
|  | struct mc_cmd *cmd; | 
|  |  | 
|  | if (wait_cfg(dev, &lp->mc_cmd.cmd, 1000, "multicast list change request timed out")) | 
|  | return; | 
|  | cmd = &lp->mc_cmd; | 
|  | cmd->cmd.command = CmdMulticastList; | 
|  | cmd->mc_cnt = cnt * ETH_ALEN; | 
|  | cp = cmd->mc_addrs; | 
|  | netdev_for_each_mc_addr(ha, dev) { | 
|  | if (!cnt--) | 
|  | break; | 
|  | memcpy(cp, ha->addr, ETH_ALEN); | 
|  | if (i596_debug > 1) | 
|  | DEB(DEB_MULTI,printk(KERN_INFO "%s: Adding address %pM\n", | 
|  | dev->name, cp)); | 
|  | cp += ETH_ALEN; | 
|  | } | 
|  | i596_add_cmd(dev, &cmd->cmd); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef MODULE | 
|  | static struct net_device *dev_82596; | 
|  |  | 
|  | static int debug = -1; | 
|  | module_param(debug, int, 0); | 
|  | MODULE_PARM_DESC(debug, "i82596 debug mask"); | 
|  |  | 
|  | int __init init_module(void) | 
|  | { | 
|  | if (debug >= 0) | 
|  | i596_debug = debug; | 
|  | dev_82596 = i82596_probe(-1); | 
|  | if (IS_ERR(dev_82596)) | 
|  | return PTR_ERR(dev_82596); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void __exit cleanup_module(void) | 
|  | { | 
|  | unregister_netdev(dev_82596); | 
|  | #ifdef __mc68000__ | 
|  | /* XXX This assumes default cache mode to be IOMAP_FULL_CACHING, | 
|  | * XXX which may be invalid (CONFIG_060_WRITETHROUGH) | 
|  | */ | 
|  |  | 
|  | kernel_set_cachemode((void *)(dev_82596->mem_start), 4096, | 
|  | IOMAP_FULL_CACHING); | 
|  | #endif | 
|  | free_page ((u32)(dev_82596->mem_start)); | 
|  | free_netdev(dev_82596); | 
|  | } | 
|  |  | 
|  | #endif				/* MODULE */ |