| /* | 
 |  * tps62360.c -- TI tps62360 | 
 |  * | 
 |  * Driver for processor core supply tps62360, tps62361B, tps62362 and tps62363. | 
 |  * | 
 |  * Copyright (c) 2012, NVIDIA Corporation. | 
 |  * | 
 |  * Author: Laxman Dewangan <ldewangan@nvidia.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation version 2. | 
 |  * | 
 |  * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, | 
 |  * whether express or implied; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  * General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA | 
 |  * 02111-1307, USA | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/err.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_device.h> | 
 | #include <linux/of_gpio.h> | 
 | #include <linux/regulator/of_regulator.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/regulator/driver.h> | 
 | #include <linux/regulator/machine.h> | 
 | #include <linux/regulator/tps62360.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/regmap.h> | 
 |  | 
 | /* Register definitions */ | 
 | #define REG_VSET0		0 | 
 | #define REG_VSET1		1 | 
 | #define REG_VSET2		2 | 
 | #define REG_VSET3		3 | 
 | #define REG_CONTROL		4 | 
 | #define REG_TEMP		5 | 
 | #define REG_RAMPCTRL		6 | 
 | #define REG_CHIPID		8 | 
 |  | 
 | #define FORCE_PWM_ENABLE	BIT(7) | 
 |  | 
 | enum chips {TPS62360, TPS62361, TPS62362, TPS62363}; | 
 |  | 
 | #define TPS62360_BASE_VOLTAGE	770000 | 
 | #define TPS62360_N_VOLTAGES	64 | 
 |  | 
 | #define TPS62361_BASE_VOLTAGE	500000 | 
 | #define TPS62361_N_VOLTAGES	128 | 
 |  | 
 | /* tps 62360 chip information */ | 
 | struct tps62360_chip { | 
 | 	struct device *dev; | 
 | 	struct regulator_desc desc; | 
 | 	struct regulator_dev *rdev; | 
 | 	struct regmap *regmap; | 
 | 	int vsel0_gpio; | 
 | 	int vsel1_gpio; | 
 | 	u8 voltage_reg_mask; | 
 | 	bool en_internal_pulldn; | 
 | 	bool en_discharge; | 
 | 	bool valid_gpios; | 
 | 	int lru_index[4]; | 
 | 	int curr_vset_vsel[4]; | 
 | 	int curr_vset_id; | 
 | }; | 
 |  | 
 | /* | 
 |  * find_voltage_set_register: Find new voltage configuration register | 
 |  * (VSET) id. | 
 |  * The finding of the new VSET register will be based on the LRU mechanism. | 
 |  * Each VSET register will have different voltage configured . This | 
 |  * Function will look if any of the VSET register have requested voltage set | 
 |  * or not. | 
 |  *     - If it is already there then it will make that register as most | 
 |  *       recently used and return as found so that caller need not to set | 
 |  *       the VSET register but need to set the proper gpios to select this | 
 |  *       VSET register. | 
 |  *     - If requested voltage is not found then it will use the least | 
 |  *       recently mechanism to get new VSET register for new configuration | 
 |  *       and will return not_found so that caller need to set new VSET | 
 |  *       register and then gpios (both). | 
 |  */ | 
 | static bool find_voltage_set_register(struct tps62360_chip *tps, | 
 | 		int req_vsel, int *vset_reg_id) | 
 | { | 
 | 	int i; | 
 | 	bool found = false; | 
 | 	int new_vset_reg = tps->lru_index[3]; | 
 | 	int found_index = 3; | 
 |  | 
 | 	for (i = 0; i < 4; ++i) { | 
 | 		if (tps->curr_vset_vsel[tps->lru_index[i]] == req_vsel) { | 
 | 			new_vset_reg = tps->lru_index[i]; | 
 | 			found_index = i; | 
 | 			found = true; | 
 | 			goto update_lru_index; | 
 | 		} | 
 | 	} | 
 |  | 
 | update_lru_index: | 
 | 	for (i = found_index; i > 0; i--) | 
 | 		tps->lru_index[i] = tps->lru_index[i - 1]; | 
 |  | 
 | 	tps->lru_index[0] = new_vset_reg; | 
 | 	*vset_reg_id = new_vset_reg; | 
 | 	return found; | 
 | } | 
 |  | 
 | static int tps62360_dcdc_get_voltage_sel(struct regulator_dev *dev) | 
 | { | 
 | 	struct tps62360_chip *tps = rdev_get_drvdata(dev); | 
 | 	int vsel; | 
 | 	unsigned int data; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data); | 
 | 	if (ret < 0) { | 
 | 		dev_err(tps->dev, "%s(): register %d read failed with err %d\n", | 
 | 			__func__, REG_VSET0 + tps->curr_vset_id, ret); | 
 | 		return ret; | 
 | 	} | 
 | 	vsel = (int)data & tps->voltage_reg_mask; | 
 | 	return vsel; | 
 | } | 
 |  | 
 | static int tps62360_dcdc_set_voltage_sel(struct regulator_dev *dev, | 
 | 					 unsigned selector) | 
 | { | 
 | 	struct tps62360_chip *tps = rdev_get_drvdata(dev); | 
 | 	int ret; | 
 | 	bool found = false; | 
 | 	int new_vset_id = tps->curr_vset_id; | 
 |  | 
 | 	/* | 
 | 	 * If gpios are available to select the VSET register then least | 
 | 	 * recently used register for new configuration. | 
 | 	 */ | 
 | 	if (tps->valid_gpios) | 
 | 		found = find_voltage_set_register(tps, selector, &new_vset_id); | 
 |  | 
 | 	if (!found) { | 
 | 		ret = regmap_update_bits(tps->regmap, REG_VSET0 + new_vset_id, | 
 | 				tps->voltage_reg_mask, selector); | 
 | 		if (ret < 0) { | 
 | 			dev_err(tps->dev, | 
 | 				"%s(): register %d update failed with err %d\n", | 
 | 				 __func__, REG_VSET0 + new_vset_id, ret); | 
 | 			return ret; | 
 | 		} | 
 | 		tps->curr_vset_id = new_vset_id; | 
 | 		tps->curr_vset_vsel[new_vset_id] = selector; | 
 | 	} | 
 |  | 
 | 	/* Select proper VSET register vio gpios */ | 
 | 	if (tps->valid_gpios) { | 
 | 		gpio_set_value_cansleep(tps->vsel0_gpio, new_vset_id & 0x1); | 
 | 		gpio_set_value_cansleep(tps->vsel1_gpio, | 
 | 					(new_vset_id >> 1) & 0x1); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tps62360_set_mode(struct regulator_dev *rdev, unsigned int mode) | 
 | { | 
 | 	struct tps62360_chip *tps = rdev_get_drvdata(rdev); | 
 | 	int i; | 
 | 	int val; | 
 | 	int ret; | 
 |  | 
 | 	/* Enable force PWM mode in FAST mode only. */ | 
 | 	switch (mode) { | 
 | 	case REGULATOR_MODE_FAST: | 
 | 		val = FORCE_PWM_ENABLE; | 
 | 		break; | 
 |  | 
 | 	case REGULATOR_MODE_NORMAL: | 
 | 		val = 0; | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (!tps->valid_gpios) { | 
 | 		ret = regmap_update_bits(tps->regmap, | 
 | 			REG_VSET0 + tps->curr_vset_id, FORCE_PWM_ENABLE, val); | 
 | 		if (ret < 0) | 
 | 			dev_err(tps->dev, | 
 | 				"%s(): register %d update failed with err %d\n", | 
 | 				__func__, REG_VSET0 + tps->curr_vset_id, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* If gpios are valid then all register set need to be control */ | 
 | 	for (i = 0; i < 4; ++i) { | 
 | 		ret = regmap_update_bits(tps->regmap, | 
 | 					REG_VSET0 + i, FORCE_PWM_ENABLE, val); | 
 | 		if (ret < 0) { | 
 | 			dev_err(tps->dev, | 
 | 				"%s(): register %d update failed with err %d\n", | 
 | 				__func__, REG_VSET0 + i, ret); | 
 | 			return ret; | 
 | 		} | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | static unsigned int tps62360_get_mode(struct regulator_dev *rdev) | 
 | { | 
 | 	struct tps62360_chip *tps = rdev_get_drvdata(rdev); | 
 | 	unsigned int data; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data); | 
 | 	if (ret < 0) { | 
 | 		dev_err(tps->dev, "%s(): register %d read failed with err %d\n", | 
 | 			__func__, REG_VSET0 + tps->curr_vset_id, ret); | 
 | 		return ret; | 
 | 	} | 
 | 	return (data & FORCE_PWM_ENABLE) ? | 
 | 				REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL; | 
 | } | 
 |  | 
 | static struct regulator_ops tps62360_dcdc_ops = { | 
 | 	.get_voltage_sel	= tps62360_dcdc_get_voltage_sel, | 
 | 	.set_voltage_sel	= tps62360_dcdc_set_voltage_sel, | 
 | 	.list_voltage		= regulator_list_voltage_linear, | 
 | 	.map_voltage		= regulator_map_voltage_linear, | 
 | 	.set_voltage_time_sel	= regulator_set_voltage_time_sel, | 
 | 	.set_mode		= tps62360_set_mode, | 
 | 	.get_mode		= tps62360_get_mode, | 
 | }; | 
 |  | 
 | static int tps62360_init_dcdc(struct tps62360_chip *tps, | 
 | 		struct tps62360_regulator_platform_data *pdata) | 
 | { | 
 | 	int ret; | 
 | 	unsigned int ramp_ctrl; | 
 |  | 
 | 	/* Initialize internal pull up/down control */ | 
 | 	if (tps->en_internal_pulldn) | 
 | 		ret = regmap_write(tps->regmap, REG_CONTROL, 0xE0); | 
 | 	else | 
 | 		ret = regmap_write(tps->regmap, REG_CONTROL, 0x0); | 
 | 	if (ret < 0) { | 
 | 		dev_err(tps->dev, | 
 | 			"%s(): register %d write failed with err %d\n", | 
 | 			__func__, REG_CONTROL, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* Reset output discharge path to reduce power consumption */ | 
 | 	ret = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), 0); | 
 | 	if (ret < 0) { | 
 | 		dev_err(tps->dev, | 
 | 			"%s(): register %d update failed with err %d\n", | 
 | 			__func__, REG_RAMPCTRL, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* Get ramp value from ramp control register */ | 
 | 	ret = regmap_read(tps->regmap, REG_RAMPCTRL, &ramp_ctrl); | 
 | 	if (ret < 0) { | 
 | 		dev_err(tps->dev, | 
 | 			"%s(): register %d read failed with err %d\n", | 
 | 			__func__, REG_RAMPCTRL, ret); | 
 | 		return ret; | 
 | 	} | 
 | 	ramp_ctrl = (ramp_ctrl >> 4) & 0x7; | 
 |  | 
 | 	/* ramp mV/us = 32/(2^ramp_ctrl) */ | 
 | 	tps->desc.ramp_delay = DIV_ROUND_UP(32000, BIT(ramp_ctrl)); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct regmap_config tps62360_regmap_config = { | 
 | 	.reg_bits		= 8, | 
 | 	.val_bits		= 8, | 
 | 	.max_register		= REG_CHIPID, | 
 | 	.cache_type		= REGCACHE_RBTREE, | 
 | }; | 
 |  | 
 | static struct tps62360_regulator_platform_data * | 
 | 	of_get_tps62360_platform_data(struct device *dev) | 
 | { | 
 | 	struct tps62360_regulator_platform_data *pdata; | 
 | 	struct device_node *np = dev->of_node; | 
 |  | 
 | 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); | 
 | 	if (!pdata) { | 
 | 		dev_err(dev, "Memory alloc failed for platform data\n"); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node); | 
 | 	if (!pdata->reg_init_data) { | 
 | 		dev_err(dev, "Not able to get OF regulator init data\n"); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	pdata->vsel0_gpio = of_get_named_gpio(np, "vsel0-gpio", 0); | 
 | 	pdata->vsel1_gpio = of_get_named_gpio(np, "vsel1-gpio", 0); | 
 |  | 
 | 	if (of_find_property(np, "ti,vsel0-state-high", NULL)) | 
 | 		pdata->vsel0_def_state = 1; | 
 |  | 
 | 	if (of_find_property(np, "ti,vsel1-state-high", NULL)) | 
 | 		pdata->vsel1_def_state = 1; | 
 |  | 
 | 	if (of_find_property(np, "ti,enable-pull-down", NULL)) | 
 | 		pdata->en_internal_pulldn = true; | 
 |  | 
 | 	if (of_find_property(np, "ti,enable-vout-discharge", NULL)) | 
 | 		pdata->en_discharge = true; | 
 |  | 
 | 	return pdata; | 
 | } | 
 |  | 
 | #if defined(CONFIG_OF) | 
 | static const struct of_device_id tps62360_of_match[] = { | 
 | 	 { .compatible = "ti,tps62360", .data = (void *)TPS62360}, | 
 | 	 { .compatible = "ti,tps62361", .data = (void *)TPS62361}, | 
 | 	 { .compatible = "ti,tps62362", .data = (void *)TPS62362}, | 
 | 	 { .compatible = "ti,tps62363", .data = (void *)TPS62363}, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, tps62360_of_match); | 
 | #endif | 
 |  | 
 | static int tps62360_probe(struct i2c_client *client, | 
 | 				     const struct i2c_device_id *id) | 
 | { | 
 | 	struct regulator_config config = { }; | 
 | 	struct tps62360_regulator_platform_data *pdata; | 
 | 	struct regulator_dev *rdev; | 
 | 	struct tps62360_chip *tps; | 
 | 	int ret; | 
 | 	int i; | 
 | 	int chip_id; | 
 |  | 
 | 	pdata = client->dev.platform_data; | 
 | 	chip_id = id->driver_data; | 
 |  | 
 | 	if (client->dev.of_node) { | 
 | 		const struct of_device_id *match; | 
 | 		match = of_match_device(of_match_ptr(tps62360_of_match), | 
 | 				&client->dev); | 
 | 		if (!match) { | 
 | 			dev_err(&client->dev, "Error: No device match found\n"); | 
 | 			return -ENODEV; | 
 | 		} | 
 | 		chip_id = (int)match->data; | 
 | 		if (!pdata) | 
 | 			pdata = of_get_tps62360_platform_data(&client->dev); | 
 | 	} | 
 |  | 
 | 	if (!pdata) { | 
 | 		dev_err(&client->dev, "%s(): Platform data not found\n", | 
 | 						__func__); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); | 
 | 	if (!tps) { | 
 | 		dev_err(&client->dev, "%s(): Memory allocation failed\n", | 
 | 						__func__); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	tps->en_discharge = pdata->en_discharge; | 
 | 	tps->en_internal_pulldn = pdata->en_internal_pulldn; | 
 | 	tps->vsel0_gpio = pdata->vsel0_gpio; | 
 | 	tps->vsel1_gpio = pdata->vsel1_gpio; | 
 | 	tps->dev = &client->dev; | 
 |  | 
 | 	switch (chip_id) { | 
 | 	case TPS62360: | 
 | 	case TPS62362: | 
 | 		tps->desc.min_uV = TPS62360_BASE_VOLTAGE; | 
 | 		tps->voltage_reg_mask = 0x3F; | 
 | 		tps->desc.n_voltages = TPS62360_N_VOLTAGES; | 
 | 		break; | 
 | 	case TPS62361: | 
 | 	case TPS62363: | 
 | 		tps->desc.min_uV = TPS62361_BASE_VOLTAGE; | 
 | 		tps->voltage_reg_mask = 0x7F; | 
 | 		tps->desc.n_voltages = TPS62361_N_VOLTAGES; | 
 | 		break; | 
 | 	default: | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	tps->desc.name = id->name; | 
 | 	tps->desc.id = 0; | 
 | 	tps->desc.ops = &tps62360_dcdc_ops; | 
 | 	tps->desc.type = REGULATOR_VOLTAGE; | 
 | 	tps->desc.owner = THIS_MODULE; | 
 | 	tps->desc.uV_step = 10000; | 
 |  | 
 | 	tps->regmap = devm_regmap_init_i2c(client, &tps62360_regmap_config); | 
 | 	if (IS_ERR(tps->regmap)) { | 
 | 		ret = PTR_ERR(tps->regmap); | 
 | 		dev_err(&client->dev, | 
 | 			"%s(): regmap allocation failed with err %d\n", | 
 | 			__func__, ret); | 
 | 		return ret; | 
 | 	} | 
 | 	i2c_set_clientdata(client, tps); | 
 |  | 
 | 	tps->curr_vset_id = (pdata->vsel1_def_state & 1) * 2 + | 
 | 				(pdata->vsel0_def_state & 1); | 
 | 	tps->lru_index[0] = tps->curr_vset_id; | 
 | 	tps->valid_gpios = false; | 
 |  | 
 | 	if (gpio_is_valid(tps->vsel0_gpio) && gpio_is_valid(tps->vsel1_gpio)) { | 
 | 		int gpio_flags; | 
 | 		gpio_flags = (pdata->vsel0_def_state) ? | 
 | 				GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; | 
 | 		ret = devm_gpio_request_one(&client->dev, tps->vsel0_gpio, | 
 | 				gpio_flags, "tps62360-vsel0"); | 
 | 		if (ret) { | 
 | 			dev_err(&client->dev, | 
 | 				"%s(): Could not obtain vsel0 GPIO %d: %d\n", | 
 | 				__func__, tps->vsel0_gpio, ret); | 
 | 			return ret; | 
 | 		} | 
 |  | 
 | 		gpio_flags = (pdata->vsel1_def_state) ? | 
 | 				GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; | 
 | 		ret = devm_gpio_request_one(&client->dev, tps->vsel1_gpio, | 
 | 				gpio_flags, "tps62360-vsel1"); | 
 | 		if (ret) { | 
 | 			dev_err(&client->dev, | 
 | 				"%s(): Could not obtain vsel1 GPIO %d: %d\n", | 
 | 				__func__, tps->vsel1_gpio, ret); | 
 | 			return ret; | 
 | 		} | 
 | 		tps->valid_gpios = true; | 
 |  | 
 | 		/* | 
 | 		 * Initialize the lru index with vset_reg id | 
 | 		 * The index 0 will be most recently used and | 
 | 		 * set with the tps->curr_vset_id */ | 
 | 		for (i = 0; i < 4; ++i) | 
 | 			tps->lru_index[i] = i; | 
 | 		tps->lru_index[0] = tps->curr_vset_id; | 
 | 		tps->lru_index[tps->curr_vset_id] = 0; | 
 | 	} | 
 |  | 
 | 	ret = tps62360_init_dcdc(tps, pdata); | 
 | 	if (ret < 0) { | 
 | 		dev_err(tps->dev, "%s(): Init failed with err = %d\n", | 
 | 				__func__, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	config.dev = &client->dev; | 
 | 	config.init_data = pdata->reg_init_data; | 
 | 	config.driver_data = tps; | 
 | 	config.of_node = client->dev.of_node; | 
 |  | 
 | 	/* Register the regulators */ | 
 | 	rdev = regulator_register(&tps->desc, &config); | 
 | 	if (IS_ERR(rdev)) { | 
 | 		dev_err(tps->dev, | 
 | 			"%s(): regulator register failed with err %s\n", | 
 | 			__func__, id->name); | 
 | 		return PTR_ERR(rdev); | 
 | 	} | 
 |  | 
 | 	tps->rdev = rdev; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * tps62360_remove - tps62360 driver i2c remove handler | 
 |  * @client: i2c driver client device structure | 
 |  * | 
 |  * Unregister TPS driver as an i2c client device driver | 
 |  */ | 
 | static int tps62360_remove(struct i2c_client *client) | 
 | { | 
 | 	struct tps62360_chip *tps = i2c_get_clientdata(client); | 
 |  | 
 | 	regulator_unregister(tps->rdev); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void tps62360_shutdown(struct i2c_client *client) | 
 | { | 
 | 	struct tps62360_chip *tps = i2c_get_clientdata(client); | 
 | 	int st; | 
 |  | 
 | 	if (!tps->en_discharge) | 
 | 		return; | 
 |  | 
 | 	/* Configure the output discharge path */ | 
 | 	st = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), BIT(2)); | 
 | 	if (st < 0) | 
 | 		dev_err(tps->dev, | 
 | 			"%s(): register %d update failed with err %d\n", | 
 | 			__func__, REG_RAMPCTRL, st); | 
 | } | 
 |  | 
 | static const struct i2c_device_id tps62360_id[] = { | 
 | 	{.name = "tps62360", .driver_data = TPS62360}, | 
 | 	{.name = "tps62361", .driver_data = TPS62361}, | 
 | 	{.name = "tps62362", .driver_data = TPS62362}, | 
 | 	{.name = "tps62363", .driver_data = TPS62363}, | 
 | 	{}, | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(i2c, tps62360_id); | 
 |  | 
 | static struct i2c_driver tps62360_i2c_driver = { | 
 | 	.driver = { | 
 | 		.name = "tps62360", | 
 | 		.owner = THIS_MODULE, | 
 | 		.of_match_table = of_match_ptr(tps62360_of_match), | 
 | 	}, | 
 | 	.probe = tps62360_probe, | 
 | 	.remove = tps62360_remove, | 
 | 	.shutdown = tps62360_shutdown, | 
 | 	.id_table = tps62360_id, | 
 | }; | 
 |  | 
 | static int __init tps62360_init(void) | 
 | { | 
 | 	return i2c_add_driver(&tps62360_i2c_driver); | 
 | } | 
 | subsys_initcall(tps62360_init); | 
 |  | 
 | static void __exit tps62360_cleanup(void) | 
 | { | 
 | 	i2c_del_driver(&tps62360_i2c_driver); | 
 | } | 
 | module_exit(tps62360_cleanup); | 
 |  | 
 | MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); | 
 | MODULE_DESCRIPTION("TPS6236x voltage regulator driver"); | 
 | MODULE_LICENSE("GPL v2"); |