powerpc/44x: pci: Add a want_sdr flag into ppc4xx_pciex_hwops
Currituck doesn't need nor use SDR so aborting the pci setup if there is
no sdr-base would be bad.
Add a flag to ppc4xx_pciex_hwops for the backends to state if they need
SDR and then only complain and abort if they do and it's not found in
the device tree.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 16f5eba..95d5eaa 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -647,6 +647,7 @@
struct ppc4xx_pciex_hwops
{
+ bool want_sdr;
int (*core_init)(struct device_node *np);
int (*port_init_hw)(struct ppc4xx_pciex_port *port);
int (*setup_utl)(struct ppc4xx_pciex_port *port);
@@ -916,6 +917,7 @@
static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
{
+ .want_sdr = true,
.core_init = ppc440spe_pciex_core_init,
.port_init_hw = ppc440speA_pciex_init_port_hw,
.setup_utl = ppc440speA_pciex_init_utl,
@@ -924,6 +926,7 @@
static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
{
+ .want_sdr = true,
.core_init = ppc440spe_pciex_core_init,
.port_init_hw = ppc440speB_pciex_init_port_hw,
.setup_utl = ppc440speB_pciex_init_utl,
@@ -1034,6 +1037,7 @@
static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
{
+ .want_sdr = true,
.core_init = ppc460ex_pciex_core_init,
.port_init_hw = ppc460ex_pciex_init_port_hw,
.setup_utl = ppc460ex_pciex_init_utl,
@@ -1181,6 +1185,7 @@
}
static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
+ .want_sdr = true,
.core_init = ppc460sx_pciex_core_init,
.port_init_hw = ppc460sx_pciex_init_port_hw,
.setup_utl = ppc460sx_pciex_init_utl,
@@ -1276,6 +1281,7 @@
static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
{
+ .want_sdr = true,
.core_init = ppc405ex_pciex_core_init,
.port_init_hw = ppc405ex_pciex_init_port_hw,
.setup_utl = ppc405ex_pciex_init_utl,
@@ -1972,13 +1978,15 @@
}
port->node = of_node_get(np);
- pval = of_get_property(np, "sdr-base", NULL);
- if (pval == NULL) {
- printk(KERN_ERR "PCIE: missing sdr-base for %s\n",
- np->full_name);
- return;
+ if (ppc4xx_pciex_hwops->want_sdr) {
+ pval = of_get_property(np, "sdr-base", NULL);
+ if (pval == NULL) {
+ printk(KERN_ERR "PCIE: missing sdr-base for %s\n",
+ np->full_name);
+ return;
+ }
+ port->sdr_base = *pval;
}
- port->sdr_base = *pval;
/* Check if device_type property is set to "pci" or "pci-endpoint".
* Resulting from this setup this PCIe port will be configured