OMAP3: Move common twl configuration to twl-common
Reduce the amount of duplicated code by moving the common
configuration for twl4030/5030/tpsxx to the twl-common file.
Use the omap3_pmic_get_config function from board files to
properly configure the PMIC with the common fields.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 12fae21..8bbd4e0 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -231,22 +231,6 @@
omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
}
-static int sdp3430_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
-8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
-5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
-4040, 3910, 3790, 3670, 3550
-};
-
-static struct twl4030_bci_platform_data sdp3430_bci_data = {
- .battery_tmp_tbl = sdp3430_batt_table,
- .tblsize = ARRAY_SIZE(sdp3430_batt_table),
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -292,14 +276,6 @@
.setup = sdp3430_twl_gpio_setup,
};
-static struct twl4030_usb_data sdp3430_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_madc_platform_data sdp3430_madc_data = {
- .irq_line = 1,
-};
-
/* regulator consumer mappings */
/* ads7846 on SPI */
@@ -463,24 +439,10 @@
.consumer_supplies = sdp3430_vpll2_supplies,
};
-static struct twl4030_codec_audio_data sdp3430_audio;
-
-static struct twl4030_codec_data sdp3430_codec = {
- .audio_mclk = 26000000,
- .audio = &sdp3430_audio,
-};
-
static struct twl4030_platform_data sdp3430_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .bci = &sdp3430_bci_data,
.gpio = &sdp3430_gpio_data,
- .madc = &sdp3430_madc_data,
.keypad = &sdp3430_kp_data,
- .usb = &sdp3430_usb_data,
- .codec = &sdp3430_codec,
.vaux1 = &sdp3430_vaux1,
.vaux2 = &sdp3430_vaux2,
@@ -496,7 +458,11 @@
static int __init omap3430_i2c_init(void)
{
/* i2c1 for PMIC only */
+ omap3_pmic_get_config(&sdp3430_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
+ TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, 0);
omap3_pmic_init("twl4030", &sdp3430_twldata);
+
/* i2c2 on camera connector (for sensor control) and optional isp1301 */
omap_register_i2c_bus(2, 400, NULL, 0);
/* i2c3 on display connector (for DVI, tfp410) */