| /* | 
 |  * arch/arm/mach-orion5x/wrt350n-v2-setup.c | 
 |  * | 
 |  * This file is licensed under the terms of the GNU General Public | 
 |  * License version 2.  This program is licensed "as is" without any | 
 |  * warranty of any kind, whether express or implied. | 
 |  */ | 
 | #include <linux/gpio.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/init.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/mtd/physmap.h> | 
 | #include <linux/mv643xx_eth.h> | 
 | #include <linux/ethtool.h> | 
 | #include <linux/leds.h> | 
 | #include <linux/gpio_keys.h> | 
 | #include <linux/input.h> | 
 | #include <net/dsa.h> | 
 | #include <asm/mach-types.h> | 
 | #include <asm/mach/arch.h> | 
 | #include <asm/mach/pci.h> | 
 | #include <mach/orion5x.h> | 
 | #include "common.h" | 
 | #include "mpp.h" | 
 |  | 
 | /* | 
 |  * LEDs attached to GPIO | 
 |  */ | 
 | static struct gpio_led wrt350n_v2_led_pins[] = { | 
 | 	{ | 
 | 		.name		= "wrt350nv2:green:power", | 
 | 		.gpio		= 0, | 
 | 		.active_low	= 1, | 
 | 	}, { | 
 | 		.name		= "wrt350nv2:green:security", | 
 | 		.gpio		= 1, | 
 | 		.active_low	= 1, | 
 | 	}, { | 
 | 		.name		= "wrt350nv2:orange:power", | 
 | 		.gpio		= 5, | 
 | 		.active_low	= 1, | 
 | 	}, { | 
 | 		.name		= "wrt350nv2:green:usb", | 
 | 		.gpio		= 6, | 
 | 		.active_low	= 1, | 
 | 	}, { | 
 | 		.name		= "wrt350nv2:green:wireless", | 
 | 		.gpio		= 7, | 
 | 		.active_low	= 1, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct gpio_led_platform_data wrt350n_v2_led_data = { | 
 | 	.leds		= wrt350n_v2_led_pins, | 
 | 	.num_leds	= ARRAY_SIZE(wrt350n_v2_led_pins), | 
 | }; | 
 |  | 
 | static struct platform_device wrt350n_v2_leds = { | 
 | 	.name	= "leds-gpio", | 
 | 	.id	= -1, | 
 | 	.dev	= { | 
 | 		.platform_data	= &wrt350n_v2_led_data, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* | 
 |  * Buttons attached to GPIO | 
 |  */ | 
 | static struct gpio_keys_button wrt350n_v2_buttons[] = { | 
 | 	{ | 
 | 		.code		= KEY_RESTART, | 
 | 		.gpio		= 3, | 
 | 		.desc		= "Reset Button", | 
 | 		.active_low	= 1, | 
 | 	}, { | 
 | 		.code		= KEY_WPS_BUTTON, | 
 | 		.gpio		= 2, | 
 | 		.desc		= "WPS Button", | 
 | 		.active_low	= 1, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct gpio_keys_platform_data wrt350n_v2_button_data = { | 
 | 	.buttons	= wrt350n_v2_buttons, | 
 | 	.nbuttons	= ARRAY_SIZE(wrt350n_v2_buttons), | 
 | }; | 
 |  | 
 | static struct platform_device wrt350n_v2_button_device = { | 
 | 	.name		= "gpio-keys", | 
 | 	.id		= -1, | 
 | 	.num_resources	= 0, | 
 | 	.dev		= { | 
 | 		.platform_data	= &wrt350n_v2_button_data, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* | 
 |  * General setup | 
 |  */ | 
 | static unsigned int wrt350n_v2_mpp_modes[] __initdata = { | 
 | 	MPP0_GPIO,		/* Power LED green (0=on) */ | 
 | 	MPP1_GPIO,		/* Security LED (0=on) */ | 
 | 	MPP2_GPIO,		/* Internal Button (0=on) */ | 
 | 	MPP3_GPIO,		/* Reset Button (0=on) */ | 
 | 	MPP4_GPIO,		/* PCI int */ | 
 | 	MPP5_GPIO,		/* Power LED orange (0=on) */ | 
 | 	MPP6_GPIO,		/* USB LED (0=on) */ | 
 | 	MPP7_GPIO,		/* Wireless LED (0=on) */ | 
 | 	MPP8_UNUSED,		/* ??? */ | 
 | 	MPP9_GIGE,		/* GE_RXERR */ | 
 | 	MPP10_UNUSED,		/* ??? */ | 
 | 	MPP11_UNUSED,		/* ??? */ | 
 | 	MPP12_GIGE,		/* GE_TXD[4] */ | 
 | 	MPP13_GIGE,		/* GE_TXD[5] */ | 
 | 	MPP14_GIGE,		/* GE_TXD[6] */ | 
 | 	MPP15_GIGE,		/* GE_TXD[7] */ | 
 | 	MPP16_GIGE,		/* GE_RXD[4] */ | 
 | 	MPP17_GIGE,		/* GE_RXD[5] */ | 
 | 	MPP18_GIGE,		/* GE_RXD[6] */ | 
 | 	MPP19_GIGE,		/* GE_RXD[7] */ | 
 | 	0, | 
 | }; | 
 |  | 
 | /* | 
 |  * 8M NOR flash Device bus boot chip select | 
 |  */ | 
 | #define WRT350N_V2_NOR_BOOT_BASE	0xf4000000 | 
 | #define WRT350N_V2_NOR_BOOT_SIZE	SZ_8M | 
 |  | 
 | static struct mtd_partition wrt350n_v2_nor_flash_partitions[] = { | 
 | 	{ | 
 | 		.name		= "kernel", | 
 | 		.offset		= 0x00000000, | 
 | 		.size		= 0x00760000, | 
 | 	}, { | 
 | 		.name		= "rootfs", | 
 | 		.offset		= 0x001a0000, | 
 | 		.size		= 0x005c0000, | 
 | 	}, { | 
 | 		.name		= "lang", | 
 | 		.offset		= 0x00760000, | 
 | 		.size		= 0x00040000, | 
 | 	}, { | 
 | 		.name		= "nvram", | 
 | 		.offset		= 0x007a0000, | 
 | 		.size		= 0x00020000, | 
 | 	}, { | 
 | 		.name		= "u-boot", | 
 | 		.offset		= 0x007c0000, | 
 | 		.size		= 0x00040000, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct physmap_flash_data wrt350n_v2_nor_flash_data = { | 
 | 	.width		= 1, | 
 | 	.parts		= wrt350n_v2_nor_flash_partitions, | 
 | 	.nr_parts	= ARRAY_SIZE(wrt350n_v2_nor_flash_partitions), | 
 | }; | 
 |  | 
 | static struct resource wrt350n_v2_nor_flash_resource = { | 
 | 	.flags		= IORESOURCE_MEM, | 
 | 	.start		= WRT350N_V2_NOR_BOOT_BASE, | 
 | 	.end		= WRT350N_V2_NOR_BOOT_BASE + WRT350N_V2_NOR_BOOT_SIZE - 1, | 
 | }; | 
 |  | 
 | static struct platform_device wrt350n_v2_nor_flash = { | 
 | 	.name			= "physmap-flash", | 
 | 	.id			= 0, | 
 | 	.dev		= { | 
 | 		.platform_data	= &wrt350n_v2_nor_flash_data, | 
 | 	}, | 
 | 	.num_resources		= 1, | 
 | 	.resource		= &wrt350n_v2_nor_flash_resource, | 
 | }; | 
 |  | 
 | static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = { | 
 | 	.phy_addr	= MV643XX_ETH_PHY_NONE, | 
 | 	.speed		= SPEED_1000, | 
 | 	.duplex		= DUPLEX_FULL, | 
 | }; | 
 |  | 
 | static struct dsa_chip_data wrt350n_v2_switch_chip_data = { | 
 | 	.port_names[0]	= "lan2", | 
 | 	.port_names[1]	= "lan1", | 
 | 	.port_names[2]	= "wan", | 
 | 	.port_names[3]	= "cpu", | 
 | 	.port_names[5]	= "lan3", | 
 | 	.port_names[7]	= "lan4", | 
 | }; | 
 |  | 
 | static struct dsa_platform_data wrt350n_v2_switch_plat_data = { | 
 | 	.nr_chips	= 1, | 
 | 	.chip		= &wrt350n_v2_switch_chip_data, | 
 | }; | 
 |  | 
 | static void __init wrt350n_v2_init(void) | 
 | { | 
 | 	/* | 
 | 	 * Setup basic Orion functions. Need to be called early. | 
 | 	 */ | 
 | 	orion5x_init(); | 
 |  | 
 | 	orion5x_mpp_conf(wrt350n_v2_mpp_modes); | 
 |  | 
 | 	/* | 
 | 	 * Configure peripherals. | 
 | 	 */ | 
 | 	orion5x_ehci0_init(); | 
 | 	orion5x_eth_init(&wrt350n_v2_eth_data); | 
 | 	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ); | 
 | 	orion5x_uart0_init(); | 
 |  | 
 | 	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE, | 
 | 				   WRT350N_V2_NOR_BOOT_SIZE); | 
 | 	platform_device_register(&wrt350n_v2_nor_flash); | 
 | 	platform_device_register(&wrt350n_v2_leds); | 
 | 	platform_device_register(&wrt350n_v2_button_device); | 
 | } | 
 |  | 
 | static int __init wrt350n_v2_pci_map_irq(const struct pci_dev *dev, u8 slot, | 
 | 	u8 pin) | 
 | { | 
 | 	int irq; | 
 |  | 
 | 	/* | 
 | 	 * Check for devices with hard-wired IRQs. | 
 | 	 */ | 
 | 	irq = orion5x_pci_map_irq(dev, slot, pin); | 
 | 	if (irq != -1) | 
 | 		return irq; | 
 |  | 
 | 	/* | 
 | 	 * Mini-PCI slot. | 
 | 	 */ | 
 | 	if (slot == 7) | 
 | 		return gpio_to_irq(4); | 
 |  | 
 | 	return -1; | 
 | } | 
 |  | 
 | static struct hw_pci wrt350n_v2_pci __initdata = { | 
 | 	.nr_controllers	= 2, | 
 | 	.setup		= orion5x_pci_sys_setup, | 
 | 	.scan		= orion5x_pci_sys_scan_bus, | 
 | 	.map_irq	= wrt350n_v2_pci_map_irq, | 
 | }; | 
 |  | 
 | static int __init wrt350n_v2_pci_init(void) | 
 | { | 
 | 	if (machine_is_wrt350n_v2()) | 
 | 		pci_common_init(&wrt350n_v2_pci); | 
 |  | 
 | 	return 0; | 
 | } | 
 | subsys_initcall(wrt350n_v2_pci_init); | 
 |  | 
 | MACHINE_START(WRT350N_V2, "Linksys WRT350N v2") | 
 | 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ | 
 | 	.atag_offset	= 0x100, | 
 | 	.init_machine	= wrt350n_v2_init, | 
 | 	.map_io		= orion5x_map_io, | 
 | 	.init_early	= orion5x_init_early, | 
 | 	.init_irq	= orion5x_init_irq, | 
 | 	.timer		= &orion5x_timer, | 
 | 	.fixup		= tag_fixup_mem32, | 
 | 	.restart	= orion5x_restart, | 
 | MACHINE_END |