mwifiex: add support to configure VHT for AP mode
Currently, default VHT configuration from the firmware is used
for the VHT operations. Adding vhtcfg command to configure the
firmware based on input received from cfg.
Enable VHT for AP mode only when cfg80211_ap_settings has a
VHT IE i.e., when ieee80211ac is set to 1 in the hostapd.conf.
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 57c5def..1f7578d 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -295,6 +295,7 @@
#define HostCmd_CMD_PCIE_DESC_DETAILS 0x00fa
#define HostCmd_CMD_MGMT_FRAME_REG 0x010c
#define HostCmd_CMD_REMAIN_ON_CHAN 0x010d
+#define HostCmd_CMD_11AC_CFG 0x0112
#define PROTOCOL_NO_SECURITY 0x01
#define PROTOCOL_STATIC_WEP 0x02
@@ -1363,6 +1364,15 @@
u8 tlv[0];
};
+struct host_cmd_11ac_vht_cfg {
+ __le16 action;
+ u8 band_config;
+ u8 misc_config;
+ __le32 cap_info;
+ __le32 mcs_tx_set;
+ __le32 mcs_rx_set;
+} __packed;
+
struct host_cmd_tlv_akmp {
struct host_cmd_tlv tlv;
__le16 key_mgmt;
@@ -1620,6 +1630,7 @@
struct host_cmd_ds_802_11_eeprom_access eeprom;
struct host_cmd_ds_802_11_subsc_evt subsc_evt;
struct host_cmd_ds_sys_config uap_sys_config;
+ struct host_cmd_11ac_vht_cfg vht_cfg;
} params;
} __packed;