[media] media: i2c: ths7303: remove unnecessary function ths7303_setup()
the ths7303_setup() was doing the same thing as ths7303_setval()
except that ths7303_setval() sets it to some particular mode.
This patch removes ths7303_setup() function and calls ths7303_setval()
in the probe setting the device to 480I_576I filter mode in the probe.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/i2c/ths7303.c b/drivers/media/i2c/ths7303.c
index 8cddcd0..af06187c 100644
--- a/drivers/media/i2c/ths7303.c
+++ b/drivers/media/i2c/ths7303.c
@@ -349,30 +349,6 @@
.video = &ths7303_video_ops,
};
-static int ths7303_setup(struct v4l2_subdev *sd)
-{
- struct ths7303_state *state = to_state(sd);
- struct ths7303_platform_data *pdata = &state->pdata;
- int ret;
- u8 mask;
-
- mask = 0xf8;
-
- ret = ths7303_write(sd, THS7303_CHANNEL_1, pdata->ch_1 & mask);
- if (ret)
- return ret;
-
- ret = ths7303_write(sd, THS7303_CHANNEL_2, pdata->ch_2 & mask);
- if (ret)
- return ret;
-
- ret = ths7303_write(sd, THS7303_CHANNEL_3, pdata->ch_3 & mask);
- if (ret)
- return ret;
-
- return 0;
-}
-
static int ths7303_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -402,9 +378,10 @@
/* store the driver data to differntiate the chip */
state->driver_data = (int)id->driver_data;
- if (ths7303_setup(sd) < 0) {
- v4l_err(client, "init failed\n");
- return -EIO;
+ /* set to default 480I_576I filter mode */
+ if (ths7303_setval(sd, THS7303_FILTER_MODE_480I_576I) < 0) {
+ v4l_err(client, "Setting to 480I_576I filter mode failed!\n");
+ return -EINVAL;
}
return 0;