| /* |
| * File: mca_asm.h |
| * |
| * Copyright (C) 1999 Silicon Graphics, Inc. |
| * Copyright (C) Vijay Chander (vijay@engr.sgi.com) |
| * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com> |
| * Copyright (C) 2000 Hewlett-Packard Co. |
| * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com> |
| * Copyright (C) 2002 Intel Corp. |
| * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com> |
| */ |
| #ifndef _ASM_IA64_MCA_ASM_H |
| #define _ASM_IA64_MCA_ASM_H |
| |
| #define PSR_IC 13 |
| #define PSR_I 14 |
| #define PSR_DT 17 |
| #define PSR_RT 27 |
| #define PSR_MC 35 |
| #define PSR_IT 36 |
| #define PSR_BN 44 |
| |
| /* |
| * This macro converts a instruction virtual address to a physical address |
| * Right now for simulation purposes the virtual addresses are |
| * direct mapped to physical addresses. |
| * 1. Lop off bits 61 thru 63 in the virtual address |
| */ |
| #define INST_VA_TO_PA(addr) \ |
| dep addr = 0, addr, 61, 3 |
| /* |
| * This macro converts a data virtual address to a physical address |
| * Right now for simulation purposes the virtual addresses are |
| * direct mapped to physical addresses. |
| * 1. Lop off bits 61 thru 63 in the virtual address |
| */ |
| #define DATA_VA_TO_PA(addr) \ |
| tpa addr = addr |
| /* |
| * This macro converts a data physical address to a virtual address |
| * Right now for simulation purposes the virtual addresses are |
| * direct mapped to physical addresses. |
| * 1. Put 0x7 in bits 61 thru 63. |
| */ |
| #define DATA_PA_TO_VA(addr,temp) \ |
| mov temp = 0x7 ;; \ |
| dep addr = temp, addr, 61, 3 |
| |
| #define GET_THIS_PADDR(reg, var) \ |
| mov reg = IA64_KR(PER_CPU_DATA);; \ |
| addl reg = THIS_CPU(var), reg |
| |
| /* |
| * This macro jumps to the instruction at the given virtual address |
| * and starts execution in physical mode with all the address |
| * translations turned off. |
| * 1. Save the current psr |
| * 2. Make sure that all the upper 32 bits are off |
| * |
| * 3. Clear the interrupt enable and interrupt state collection bits |
| * in the psr before updating the ipsr and iip. |
| * |
| * 4. Turn off the instruction, data and rse translation bits of the psr |
| * and store the new value into ipsr |
| * Also make sure that the interrupts are disabled. |
| * Ensure that we are in little endian mode. |
| * [psr.{rt, it, dt, i, be} = 0] |
| * |
| * 5. Get the physical address corresponding to the virtual address |
| * of the next instruction bundle and put it in iip. |
| * (Using magic numbers 24 and 40 in the deposint instruction since |
| * the IA64_SDK code directly maps to lower 24bits as physical address |
| * from a virtual address). |
| * |
| * 6. Do an rfi to move the values from ipsr to psr and iip to ip. |
| */ |
| #define PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \ |
| mov old_psr = psr; \ |
| ;; \ |
| dep old_psr = 0, old_psr, 32, 32; \ |
| \ |
| mov ar.rsc = 0 ; \ |
| ;; \ |
| srlz.d; \ |
| mov temp2 = ar.bspstore; \ |
| ;; \ |
| DATA_VA_TO_PA(temp2); \ |
| ;; \ |
| mov temp1 = ar.rnat; \ |
| ;; \ |
| mov ar.bspstore = temp2; \ |
| ;; \ |
| mov ar.rnat = temp1; \ |
| mov temp1 = psr; \ |
| mov temp2 = psr; \ |
| ;; \ |
| \ |
| dep temp2 = 0, temp2, PSR_IC, 2; \ |
| ;; \ |
| mov psr.l = temp2; \ |
| ;; \ |
| srlz.d; \ |
| dep temp1 = 0, temp1, 32, 32; \ |
| ;; \ |
| dep temp1 = 0, temp1, PSR_IT, 1; \ |
| ;; \ |
| dep temp1 = 0, temp1, PSR_DT, 1; \ |
| ;; \ |
| dep temp1 = 0, temp1, PSR_RT, 1; \ |
| ;; \ |
| dep temp1 = 0, temp1, PSR_I, 1; \ |
| ;; \ |
| dep temp1 = 0, temp1, PSR_IC, 1; \ |
| ;; \ |
| dep temp1 = -1, temp1, PSR_MC, 1; \ |
| ;; \ |
| mov cr.ipsr = temp1; \ |
| ;; \ |
| LOAD_PHYSICAL(p0, temp2, start_addr); \ |
| ;; \ |
| mov cr.iip = temp2; \ |
| mov cr.ifs = r0; \ |
| DATA_VA_TO_PA(sp); \ |
| DATA_VA_TO_PA(gp); \ |
| ;; \ |
| srlz.i; \ |
| ;; \ |
| nop 1; \ |
| nop 2; \ |
| nop 1; \ |
| nop 2; \ |
| rfi; \ |
| ;; |
| |
| /* |
| * This macro jumps to the instruction at the given virtual address |
| * and starts execution in virtual mode with all the address |
| * translations turned on. |
| * 1. Get the old saved psr |
| * |
| * 2. Clear the interrupt state collection bit in the current psr. |
| * |
| * 3. Set the instruction translation bit back in the old psr |
| * Note we have to do this since we are right now saving only the |
| * lower 32-bits of old psr.(Also the old psr has the data and |
| * rse translation bits on) |
| * |
| * 4. Set ipsr to this old_psr with "it" bit set and "bn" = 1. |
| * |
| * 5. Reset the current thread pointer (r13). |
| * |
| * 6. Set iip to the virtual address of the next instruction bundle. |
| * |
| * 7. Do an rfi to move ipsr to psr and iip to ip. |
| */ |
| |
| #define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \ |
| mov temp2 = psr; \ |
| ;; \ |
| mov old_psr = temp2; \ |
| ;; \ |
| dep temp2 = 0, temp2, PSR_IC, 2; \ |
| ;; \ |
| mov psr.l = temp2; \ |
| mov ar.rsc = 0; \ |
| ;; \ |
| srlz.d; \ |
| mov r13 = ar.k6; \ |
| mov temp2 = ar.bspstore; \ |
| ;; \ |
| DATA_PA_TO_VA(temp2,temp1); \ |
| ;; \ |
| mov temp1 = ar.rnat; \ |
| ;; \ |
| mov ar.bspstore = temp2; \ |
| ;; \ |
| mov ar.rnat = temp1; \ |
| ;; \ |
| mov temp1 = old_psr; \ |
| ;; \ |
| mov temp2 = 1; \ |
| ;; \ |
| dep temp1 = temp2, temp1, PSR_IC, 1; \ |
| ;; \ |
| dep temp1 = temp2, temp1, PSR_IT, 1; \ |
| ;; \ |
| dep temp1 = temp2, temp1, PSR_DT, 1; \ |
| ;; \ |
| dep temp1 = temp2, temp1, PSR_RT, 1; \ |
| ;; \ |
| dep temp1 = temp2, temp1, PSR_BN, 1; \ |
| ;; \ |
| \ |
| mov cr.ipsr = temp1; \ |
| movl temp2 = start_addr; \ |
| ;; \ |
| mov cr.iip = temp2; \ |
| ;; \ |
| DATA_PA_TO_VA(sp, temp1); \ |
| DATA_PA_TO_VA(gp, temp2); \ |
| srlz.i; \ |
| ;; \ |
| nop 1; \ |
| nop 2; \ |
| nop 1; \ |
| rfi \ |
| ;; |
| |
| /* |
| * The following offsets capture the order in which the |
| * RSE related registers from the old context are |
| * saved onto the new stack frame. |
| * |
| * +-----------------------+ |
| * |NDIRTY [BSP - BSPSTORE]| |
| * +-----------------------+ |
| * | RNAT | |
| * +-----------------------+ |
| * | BSPSTORE | |
| * +-----------------------+ |
| * | IFS | |
| * +-----------------------+ |
| * | PFS | |
| * +-----------------------+ |
| * | RSC | |
| * +-----------------------+ <-------- Bottom of new stack frame |
| */ |
| #define rse_rsc_offset 0 |
| #define rse_pfs_offset (rse_rsc_offset+0x08) |
| #define rse_ifs_offset (rse_pfs_offset+0x08) |
| #define rse_bspstore_offset (rse_ifs_offset+0x08) |
| #define rse_rnat_offset (rse_bspstore_offset+0x08) |
| #define rse_ndirty_offset (rse_rnat_offset+0x08) |
| |
| /* |
| * rse_switch_context |
| * |
| * 1. Save old RSC onto the new stack frame |
| * 2. Save PFS onto new stack frame |
| * 3. Cover the old frame and start a new frame. |
| * 4. Save IFS onto new stack frame |
| * 5. Save the old BSPSTORE on the new stack frame |
| * 6. Save the old RNAT on the new stack frame |
| * 7. Write BSPSTORE with the new backing store pointer |
| * 8. Read and save the new BSP to calculate the #dirty registers |
| * NOTE: Look at pages 11-10, 11-11 in PRM Vol 2 |
| */ |
| #define rse_switch_context(temp,p_stackframe,p_bspstore) \ |
| ;; \ |
| mov temp=ar.rsc;; \ |
| st8 [p_stackframe]=temp,8;; \ |
| mov temp=ar.pfs;; \ |
| st8 [p_stackframe]=temp,8; \ |
| cover ;; \ |
| mov temp=cr.ifs;; \ |
| st8 [p_stackframe]=temp,8;; \ |
| mov temp=ar.bspstore;; \ |
| st8 [p_stackframe]=temp,8;; \ |
| mov temp=ar.rnat;; \ |
| st8 [p_stackframe]=temp,8; \ |
| mov ar.bspstore=p_bspstore;; \ |
| mov temp=ar.bsp;; \ |
| sub temp=temp,p_bspstore;; \ |
| st8 [p_stackframe]=temp,8;; |
| |
| /* |
| * rse_return_context |
| * 1. Allocate a zero-sized frame |
| * 2. Store the number of dirty registers RSC.loadrs field |
| * 3. Issue a loadrs to insure that any registers from the interrupted |
| * context which were saved on the new stack frame have been loaded |
| * back into the stacked registers |
| * 4. Restore BSPSTORE |
| * 5. Restore RNAT |
| * 6. Restore PFS |
| * 7. Restore IFS |
| * 8. Restore RSC |
| * 9. Issue an RFI |
| */ |
| #define rse_return_context(psr_mask_reg,temp,p_stackframe) \ |
| ;; \ |
| alloc temp=ar.pfs,0,0,0,0; \ |
| add p_stackframe=rse_ndirty_offset,p_stackframe;; \ |
| ld8 temp=[p_stackframe];; \ |
| shl temp=temp,16;; \ |
| mov ar.rsc=temp;; \ |
| loadrs;; \ |
| add p_stackframe=-rse_ndirty_offset+rse_bspstore_offset,p_stackframe;;\ |
| ld8 temp=[p_stackframe];; \ |
| mov ar.bspstore=temp;; \ |
| add p_stackframe=-rse_bspstore_offset+rse_rnat_offset,p_stackframe;;\ |
| ld8 temp=[p_stackframe];; \ |
| mov ar.rnat=temp;; \ |
| add p_stackframe=-rse_rnat_offset+rse_pfs_offset,p_stackframe;; \ |
| ld8 temp=[p_stackframe];; \ |
| mov ar.pfs=temp;; \ |
| add p_stackframe=-rse_pfs_offset+rse_ifs_offset,p_stackframe;; \ |
| ld8 temp=[p_stackframe];; \ |
| mov cr.ifs=temp;; \ |
| add p_stackframe=-rse_ifs_offset+rse_rsc_offset,p_stackframe;; \ |
| ld8 temp=[p_stackframe];; \ |
| mov ar.rsc=temp ; \ |
| mov temp=psr;; \ |
| or temp=temp,psr_mask_reg;; \ |
| mov cr.ipsr=temp;; \ |
| mov temp=ip;; \ |
| add temp=0x30,temp;; \ |
| mov cr.iip=temp;; \ |
| srlz.i;; \ |
| rfi;; |
| |
| #endif /* _ASM_IA64_MCA_ASM_H */ |