|  | /* | 
|  | *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify it | 
|  | *  under  the terms of the GNU General  Public License as published by the | 
|  | *  Free Software Foundation;  either version 2 of the License, or (at your | 
|  | *  option) any later version. | 
|  | * | 
|  | *  You should have received a copy of the  GNU General Public License along | 
|  | *  with this program; if not, write  to the Free Software Foundation, Inc., | 
|  | *  675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  |  | 
|  | struct jz4740_ohci_hcd { | 
|  | struct ohci_hcd ohci_hcd; | 
|  |  | 
|  | struct regulator *vbus; | 
|  | bool vbus_enabled; | 
|  | struct clk *clk; | 
|  | }; | 
|  |  | 
|  | static inline struct jz4740_ohci_hcd *hcd_to_jz4740_hcd(struct usb_hcd *hcd) | 
|  | { | 
|  | return (struct jz4740_ohci_hcd *)(hcd->hcd_priv); | 
|  | } | 
|  |  | 
|  | static inline struct usb_hcd *jz4740_hcd_to_hcd(struct jz4740_ohci_hcd *jz4740_ohci) | 
|  | { | 
|  | return container_of((void *)jz4740_ohci, struct usb_hcd, hcd_priv); | 
|  | } | 
|  |  | 
|  | static int ohci_jz4740_start(struct usb_hcd *hcd) | 
|  | { | 
|  | struct ohci_hcd *ohci = hcd_to_ohci(hcd); | 
|  | int	ret; | 
|  |  | 
|  | ret = ohci_init(ohci); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ohci->num_ports = 1; | 
|  |  | 
|  | ret = ohci_run(ohci); | 
|  | if (ret < 0) { | 
|  | dev_err(hcd->self.controller, "Can not start %s", | 
|  | hcd->self.bus_name); | 
|  | ohci_stop(hcd); | 
|  | return ret; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ohci_jz4740_set_vbus_power(struct jz4740_ohci_hcd *jz4740_ohci, | 
|  | bool enabled) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | if (!jz4740_ohci->vbus) | 
|  | return 0; | 
|  |  | 
|  | if (enabled && !jz4740_ohci->vbus_enabled) { | 
|  | ret = regulator_enable(jz4740_ohci->vbus); | 
|  | if (ret) | 
|  | dev_err(jz4740_hcd_to_hcd(jz4740_ohci)->self.controller, | 
|  | "Could not power vbus\n"); | 
|  | } else if (!enabled && jz4740_ohci->vbus_enabled) { | 
|  | ret = regulator_disable(jz4740_ohci->vbus); | 
|  | } | 
|  |  | 
|  | if (ret == 0) | 
|  | jz4740_ohci->vbus_enabled = enabled; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ohci_jz4740_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, | 
|  | u16 wIndex, char *buf, u16 wLength) | 
|  | { | 
|  | struct jz4740_ohci_hcd *jz4740_ohci = hcd_to_jz4740_hcd(hcd); | 
|  | int ret; | 
|  |  | 
|  | switch (typeReq) { | 
|  | case SetHubFeature: | 
|  | if (wValue == USB_PORT_FEAT_POWER) | 
|  | ret = ohci_jz4740_set_vbus_power(jz4740_ohci, true); | 
|  | break; | 
|  | case ClearHubFeature: | 
|  | if (wValue == USB_PORT_FEAT_POWER) | 
|  | ret = ohci_jz4740_set_vbus_power(jz4740_ohci, false); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); | 
|  | } | 
|  |  | 
|  |  | 
|  | static const struct hc_driver ohci_jz4740_hc_driver = { | 
|  | .description =		hcd_name, | 
|  | .product_desc =		"JZ4740 OHCI", | 
|  | .hcd_priv_size =	sizeof(struct jz4740_ohci_hcd), | 
|  |  | 
|  | /* | 
|  | * generic hardware linkage | 
|  | */ | 
|  | .irq =			ohci_irq, | 
|  | .flags =		HCD_USB11 | HCD_MEMORY, | 
|  |  | 
|  | /* | 
|  | * basic lifecycle operations | 
|  | */ | 
|  | .start =		ohci_jz4740_start, | 
|  | .stop =			ohci_stop, | 
|  | .shutdown =		ohci_shutdown, | 
|  |  | 
|  | /* | 
|  | * managing i/o requests and associated device resources | 
|  | */ | 
|  | .urb_enqueue =		ohci_urb_enqueue, | 
|  | .urb_dequeue =		ohci_urb_dequeue, | 
|  | .endpoint_disable =	ohci_endpoint_disable, | 
|  |  | 
|  | /* | 
|  | * scheduling support | 
|  | */ | 
|  | .get_frame_number =	ohci_get_frame, | 
|  |  | 
|  | /* | 
|  | * root hub support | 
|  | */ | 
|  | .hub_status_data =	ohci_hub_status_data, | 
|  | .hub_control =		ohci_jz4740_hub_control, | 
|  | #ifdef	CONFIG_PM | 
|  | .bus_suspend =		ohci_bus_suspend, | 
|  | .bus_resume =		ohci_bus_resume, | 
|  | #endif | 
|  | .start_port_reset =	ohci_start_port_reset, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static __devinit int jz4740_ohci_probe(struct platform_device *pdev) | 
|  | { | 
|  | int ret; | 
|  | struct usb_hcd *hcd; | 
|  | struct jz4740_ohci_hcd *jz4740_ohci; | 
|  | struct resource *res; | 
|  | int irq; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  |  | 
|  | if (!res) { | 
|  | dev_err(&pdev->dev, "Failed to get platform resource\n"); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (irq < 0) { | 
|  | dev_err(&pdev->dev, "Failed to get platform irq\n"); | 
|  | return irq; | 
|  | } | 
|  |  | 
|  | hcd = usb_create_hcd(&ohci_jz4740_hc_driver, &pdev->dev, "jz4740"); | 
|  | if (!hcd) { | 
|  | dev_err(&pdev->dev, "Failed to create hcd.\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | jz4740_ohci = hcd_to_jz4740_hcd(hcd); | 
|  |  | 
|  | res = request_mem_region(res->start, resource_size(res), hcd_name); | 
|  | if (!res) { | 
|  | dev_err(&pdev->dev, "Failed to request mem region.\n"); | 
|  | ret = -EBUSY; | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | hcd->rsrc_start = res->start; | 
|  | hcd->rsrc_len = resource_size(res); | 
|  | hcd->regs = ioremap(res->start, resource_size(res)); | 
|  |  | 
|  | if (!hcd->regs) { | 
|  | dev_err(&pdev->dev, "Failed to ioremap registers.\n"); | 
|  | ret = -EBUSY; | 
|  | goto err_release_mem; | 
|  | } | 
|  |  | 
|  | jz4740_ohci->clk = clk_get(&pdev->dev, "uhc"); | 
|  | if (IS_ERR(jz4740_ohci->clk)) { | 
|  | ret = PTR_ERR(jz4740_ohci->clk); | 
|  | dev_err(&pdev->dev, "Failed to get clock: %d\n", ret); | 
|  | goto err_iounmap; | 
|  | } | 
|  |  | 
|  | jz4740_ohci->vbus = regulator_get(&pdev->dev, "vbus"); | 
|  | if (IS_ERR(jz4740_ohci->vbus)) | 
|  | jz4740_ohci->vbus = NULL; | 
|  |  | 
|  |  | 
|  | clk_set_rate(jz4740_ohci->clk, 48000000); | 
|  | clk_enable(jz4740_ohci->clk); | 
|  | if (jz4740_ohci->vbus) | 
|  | ohci_jz4740_set_vbus_power(jz4740_ohci, true); | 
|  |  | 
|  | platform_set_drvdata(pdev, hcd); | 
|  |  | 
|  | ohci_hcd_init(hcd_to_ohci(hcd)); | 
|  |  | 
|  | ret = usb_add_hcd(hcd, irq, 0); | 
|  | if (ret) { | 
|  | dev_err(&pdev->dev, "Failed to add hcd: %d\n", ret); | 
|  | goto err_disable; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_disable: | 
|  | platform_set_drvdata(pdev, NULL); | 
|  | if (jz4740_ohci->vbus) { | 
|  | regulator_disable(jz4740_ohci->vbus); | 
|  | regulator_put(jz4740_ohci->vbus); | 
|  | } | 
|  | clk_disable(jz4740_ohci->clk); | 
|  |  | 
|  | clk_put(jz4740_ohci->clk); | 
|  | err_iounmap: | 
|  | iounmap(hcd->regs); | 
|  | err_release_mem: | 
|  | release_mem_region(res->start, resource_size(res)); | 
|  | err_free: | 
|  | usb_put_hcd(hcd); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static __devexit int jz4740_ohci_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct usb_hcd *hcd = platform_get_drvdata(pdev); | 
|  | struct jz4740_ohci_hcd *jz4740_ohci = hcd_to_jz4740_hcd(hcd); | 
|  |  | 
|  | usb_remove_hcd(hcd); | 
|  |  | 
|  | platform_set_drvdata(pdev, NULL); | 
|  |  | 
|  | if (jz4740_ohci->vbus) { | 
|  | regulator_disable(jz4740_ohci->vbus); | 
|  | regulator_put(jz4740_ohci->vbus); | 
|  | } | 
|  |  | 
|  | clk_disable(jz4740_ohci->clk); | 
|  | clk_put(jz4740_ohci->clk); | 
|  |  | 
|  | iounmap(hcd->regs); | 
|  | release_mem_region(hcd->rsrc_start, hcd->rsrc_len); | 
|  |  | 
|  | usb_put_hcd(hcd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver ohci_hcd_jz4740_driver = { | 
|  | .probe = jz4740_ohci_probe, | 
|  | .remove = __devexit_p(jz4740_ohci_remove), | 
|  | .driver = { | 
|  | .name = "jz4740-ohci", | 
|  | .owner = THIS_MODULE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | MODULE_ALIAS("platform:jz4740-ohci"); |