ide: remove 'tf_in_flags' field from ide_task_t
* Add IDE_TFLAG_IN_DATA taskfile flag to indicate the need of reading
IDE_DATA_REG in ide_end_drive_cmd().
Set the new flag in ide_taskfile_ioctl() if ->in_flags.b.data is set.
* Add IDE_TFLAG_FLAGGED_SET_IN_FLAGS taskfile flag to indicate the
need of modifying ->in_flags in ide_taskfile_ioctl().
Set the new flag in flagged_taskfile() and move the code modifying
->tf_in_flags to ide_taskfile_ioctl().
While at it remove the bogus comment: ->tf_in_flags (except .b.data)
have no effect on selection of registers to read.
* Remove no longer needed 'tf_in_flags' field from ide_task_t.
As the result we finally have the internals of HDIO_DRIVE_TASKFILE ioctl
separated from the core IDE code.
There should be no functionality changes caused by this patch.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index f4f7e3d..1112d8b 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -340,7 +340,7 @@
if (args) {
struct ide_taskfile *tf = &args->tf;
- if (args->tf_in_flags.b.data) {
+ if (args->tf_flags & IDE_TFLAG_IN_DATA) {
u16 data = hwif->INW(IDE_DATA_REG);
tf->data = data & 0xff;
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index ff28449..03c4a0c 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -599,8 +599,8 @@
memcpy(&args.tf_array[0], req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE - 2);
memcpy(&args.tf_array[6], req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE);
- args.tf_in_flags = req_task->in_flags;
- args.data_phase = req_task->data_phase;
+
+ args.data_phase = req_task->data_phase;
args.tf_flags = IDE_TFLAG_OUT_DEVICE;
if (drive->addressing == 1)
@@ -637,6 +637,9 @@
args.tf_flags |= IDE_TFLAG_OUT_HOB;
}
+ if (req_task->in_flags.b.data)
+ args.tf_flags |= IDE_TFLAG_IN_DATA;
+
drive->io_32bit = 0;
switch(req_task->data_phase) {
case TASKFILE_MULTI_OUT:
@@ -704,7 +707,13 @@
memcpy(req_task->hob_ports, &args.tf_array[0], HDIO_DRIVE_HOB_HDR_SIZE - 2);
memcpy(req_task->io_ports, &args.tf_array[6], HDIO_DRIVE_TASK_HDR_SIZE);
- req_task->in_flags = args.tf_in_flags;
+
+ if ((args.tf_flags & IDE_TFLAG_FLAGGED_SET_IN_FLAGS) &&
+ req_task->in_flags.all == 0) {
+ req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS;
+ if (drive->addressing == 1)
+ req_task->in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8);
+ }
if (copy_to_user(buf, req_task, tasksize)) {
err = -EFAULT;
@@ -846,19 +855,7 @@
}
}
- /*
- * (ks) Check taskfile in flags.
- * If set, then execute as it is defined.
- * If not set, then define default settings.
- * The default values are:
- * read all taskfile registers (except data)
- * read the hob registers (sector, nsector, lcyl, hcyl)
- */
- if (task->tf_in_flags.all == 0) {
- task->tf_in_flags.all = IDE_TASKFILE_STD_IN_FLAGS;
- if (drive->addressing == 1)
- task->tf_in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8);
- }
+ task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS;
return do_rw_taskfile(drive, task);
}
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 7485fc7..c23ef2d 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -910,6 +910,8 @@
IDE_TFLAG_OUT_LBAH,
IDE_TFLAG_OUT_DEVICE = (1 << 14),
IDE_TFLAG_WRITE = (1 << 15),
+ IDE_TFLAG_FLAGGED_SET_IN_FLAGS = (1 << 16),
+ IDE_TFLAG_IN_DATA = (1 << 17),
};
struct ide_taskfile {
@@ -946,8 +948,7 @@
struct ide_taskfile tf;
u8 tf_array[14];
};
- u16 tf_flags;
- ide_reg_valid_t tf_in_flags;
+ u32 tf_flags;
int data_phase;
ide_pre_handler_t *prehandler;
ide_handler_t *handler;