TTY: amiserial/simserial, use tty_port
Add tty_port to serial_state and start using common tty port members
from tty_port in amiserial and simserial. The rest will follow one by
one.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 5b87744..71d3331 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -234,7 +234,7 @@
{
int status;
int serdatr;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->tport.tty;
unsigned char ch, flag;
struct async_icount *icount;
int oe = 0;
@@ -331,8 +331,8 @@
return;
}
if (info->xmit.head == info->xmit.tail
- || info->tty->stopped
- || info->tty->hw_stopped) {
+ || info->tport.tty->stopped
+ || info->tport.tty->hw_stopped) {
info->IER &= ~UART_IER_THRI;
custom.intena = IF_TBE;
mb();
@@ -347,7 +347,7 @@
if (CIRC_CNT(info->xmit.head,
info->xmit.tail,
SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
- tty_wakeup(info->tty);
+ tty_wakeup(info->tport.tty);
#ifdef SERIAL_DEBUG_INTR
printk("THRE...");
@@ -384,7 +384,7 @@
}
if (dstatus & SER_CTS)
icount->cts++;
- wake_up_interruptible(&info->delta_msr_wait);
+ wake_up_interruptible(&info->tport.delta_msr_wait);
}
if ((info->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) {
@@ -393,29 +393,29 @@
(!(status & SER_DCD)) ? "on" : "off");
#endif
if (!(status & SER_DCD))
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->tport.open_wait);
else {
#ifdef SERIAL_DEBUG_OPEN
printk("doing serial hangup...");
#endif
- if (info->tty)
- tty_hangup(info->tty);
+ if (info->tport.tty)
+ tty_hangup(info->tport.tty);
}
}
if (info->flags & ASYNC_CTS_FLOW) {
- if (info->tty->hw_stopped) {
+ if (info->tport.tty->hw_stopped) {
if (!(status & SER_CTS)) {
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
printk("CTS tx start...");
#endif
- info->tty->hw_stopped = 0;
+ info->tport.tty->hw_stopped = 0;
info->IER |= UART_IER_THRI;
custom.intena = IF_SETCLR | IF_TBE;
mb();
/* set a pending Tx Interrupt, transmitter should restart now */
custom.intreq = IF_SETCLR | IF_TBE;
mb();
- tty_wakeup(info->tty);
+ tty_wakeup(info->tport.tty);
return;
}
} else {
@@ -423,7 +423,7 @@
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
printk("CTS tx stop...");
#endif
- info->tty->hw_stopped = 1;
+ info->tport.tty->hw_stopped = 1;
info->IER &= ~UART_IER_THRI;
/* disable Tx interrupt and remove any pending interrupts */
custom.intena = IF_TBE;
@@ -456,7 +456,7 @@
printk("ser_rx_int...");
#endif
- if (!info->tty)
+ if (!info->tport.tty)
return IRQ_NONE;
receive_chars(info);
@@ -475,7 +475,7 @@
printk("ser_tx_int...");
#endif
- if (!info->tty)
+ if (!info->tport.tty)
return IRQ_NONE;
transmit_chars(info);
@@ -607,7 +607,7 @@
* clear delta_msr_wait queue to avoid mem leaks: we may free the irq
* here so the queue might never be waken up
*/
- wake_up_interruptible(&info->delta_msr_wait);
+ wake_up_interruptible(&info->tport.delta_msr_wait);
/*
* Free the IRQ, if necessary
@@ -1274,7 +1274,7 @@
cprev = info->icount;
local_irq_restore(flags);
while (1) {
- interruptible_sleep_on(&info->delta_msr_wait);
+ interruptible_sleep_on(&info->tport.delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
@@ -1442,15 +1442,15 @@
tty_ldisc_flush(tty);
tty->closing = 0;
- state->tty = NULL;
- if (state->blocked_open) {
+ state->tport.tty = NULL;
+ if (state->tport.blocked_open) {
if (state->close_delay) {
msleep_interruptible(jiffies_to_msecs(state->close_delay));
}
- wake_up_interruptible(&state->open_wait);
+ wake_up_interruptible(&state->tport.open_wait);
}
state->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&state->close_wait);
+ wake_up_interruptible(&state->tport.close_wait);
local_irq_restore(flags);
}
@@ -1531,8 +1531,8 @@
shutdown(tty, info);
info->count = 0;
info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = NULL;
- wake_up_interruptible(&info->open_wait);
+ info->tport.tty = NULL;
+ wake_up_interruptible(&info->tport.open_wait);
}
/*
@@ -1559,7 +1559,7 @@
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
+ interruptible_sleep_on(&info->tport.close_wait);
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
@@ -1589,7 +1589,7 @@
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->open_wait, &wait);
+ add_wait_queue(&info->tport.open_wait, &wait);
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready before block: ttys%d, count = %d\n",
info->line, info->count);
@@ -1600,7 +1600,7 @@
info->count--;
}
local_irq_restore(flags);
- info->blocked_open++;
+ info->tport.blocked_open++;
while (1) {
local_irq_save(flags);
if (tty->termios->c_cflag & CBAUD)
@@ -1635,10 +1635,10 @@
tty_lock();
}
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
+ remove_wait_queue(&info->tport.open_wait, &wait);
if (extra_count)
info->count++;
- info->blocked_open--;
+ info->tport.blocked_open--;
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready after blocking: ttys%d, count = %d\n",
info->line, info->count);
@@ -1661,8 +1661,9 @@
int retval;
info->count++;
- info->tty = tty;
+ info->tport.tty = tty;
tty->driver_data = info;
+ tty->port = &info->tport;
if (serial_paranoia_check(info, tty->name, "rs_open"))
return -ENODEV;
@@ -1677,7 +1678,7 @@
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
+ interruptible_sleep_on(&info->tport.close_wait);
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
@@ -1869,9 +1870,7 @@
state->icount.rx = state->icount.tx = 0;
state->icount.frame = state->icount.parity = 0;
state->icount.overrun = state->icount.brk = 0;
- init_waitqueue_head(&state->open_wait);
- init_waitqueue_head(&state->close_wait);
- init_waitqueue_head(&state->delta_msr_wait);
+ tty_port_init(&state->tport);
printk(KERN_INFO "ttyS%d is the amiga builtin serial port\n",
state->line);