[MIPS] TXx9: Reorganize PCI code
Split out PCIC dependent code and SoC dependent code from board dependent
code. Now TX4927 PCIC code is independent from TX4927/TX4938 SoC code.
Also fix some build problems on CONFIG_PCI=n.
As a bonus, "FPCIB0 Backplane Support" is available for all TX39/TX49 boards
and PCI66 support is available for all TX49 boards.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 41e0f3b..baa8c8d 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -30,7 +30,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/pm.h>
@@ -44,6 +43,7 @@
#include <asm/txx9tmr.h>
#include <asm/txx9pio.h>
#include <asm/reboot.h>
+#include <asm/txx9/pci.h>
#include <asm/txx9/jmr3927.h>
#include <asm/mipsregs.h>
@@ -96,8 +96,6 @@
extern char * __init prom_getcmdline(void);
static void jmr3927_board_init(void);
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
void __init plat_mem_setup(void)
{
@@ -112,8 +110,8 @@
/*
* IO/MEM resources.
*/
- ioport_resource.start = pci_io_resource.start;
- ioport_resource.end = pci_io_resource.end;
+ ioport_resource.start = 0;
+ ioport_resource.end = 0xffffffff;
iomem_resource.start = 0;
iomem_resource.end = 0xffffffff;
@@ -191,9 +189,33 @@
static void tx3927_setup(void);
+static void __init jmr3927_pci_setup(void)
+{
+#ifdef CONFIG_PCI
+ int extarb = !(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB);
+ struct pci_controller *c;
+
+ c = txx9_alloc_pci_controller(&txx9_primary_pcic,
+ JMR3927_PCIMEM, JMR3927_PCIMEM_SIZE,
+ JMR3927_PCIIO, JMR3927_PCIIO_SIZE);
+ register_pci_controller(c);
+ if (!extarb) {
+ /* Reset PCI Bus */
+ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+ udelay(100);
+ jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI,
+ JMR3927_IOC_RESET_ADDR);
+ udelay(100);
+ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+ }
+ tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb);
+#endif /* CONFIG_PCI */
+}
+
static void __init jmr3927_board_init(void)
{
tx3927_setup();
+ jmr3927_pci_setup();
/* SIO0 DTR on */
jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
@@ -210,14 +232,6 @@
static void __init tx3927_setup(void)
{
int i;
-#ifdef CONFIG_PCI
- unsigned long mips_pci_io_base = JMR3927_PCIIO;
- unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE;
- unsigned long mips_pci_mem_base = JMR3927_PCIMEM;
- unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE;
- /* for legacy I/O, PCI I/O PCI Bus address must be 0 */
- unsigned long mips_pci_io_pciaddr = 0;
-#endif
/* SDRAMC are configured by PROM */
@@ -272,74 +286,6 @@
tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
#endif
-#ifdef CONFIG_PCI
- /* PCIC */
- printk("TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:",
- tx3927_pcicptr->did, tx3927_pcicptr->vid,
- tx3927_pcicptr->rid);
- if (!(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB)) {
- printk("External\n");
- /* XXX */
- } else {
- printk("Internal\n");
-
- /* Reset PCI Bus */
- jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
- udelay(100);
- jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI,
- JMR3927_IOC_RESET_ADDR);
- udelay(100);
- jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
-
-
- /* Disable External PCI Config. Access */
- tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD;
-#ifdef __BIG_ENDIAN
- tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE |
- TX3927_PCIC_LBC_TIBSE |
- TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE;
-#endif
- /* LB->PCI mappings */
- tx3927_pcicptr->iomas = ~(mips_pci_io_size - 1);
- tx3927_pcicptr->ilbioma = mips_pci_io_base;
- tx3927_pcicptr->ipbioma = mips_pci_io_pciaddr;
- tx3927_pcicptr->mmas = ~(mips_pci_mem_size - 1);
- tx3927_pcicptr->ilbmma = mips_pci_mem_base;
- tx3927_pcicptr->ipbmma = mips_pci_mem_base;
- /* PCI->LB mappings */
- tx3927_pcicptr->iobas = 0xffffffff;
- tx3927_pcicptr->ioba = 0;
- tx3927_pcicptr->tlbioma = 0;
- tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1);
- tx3927_pcicptr->mba = 0;
- tx3927_pcicptr->tlbmma = 0;
- /* Enable Direct mapping Address Space Decoder */
- tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE;
-
- /* Clear All Local Bus Status */
- tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
- /* Enable All Local Bus Interrupts */
- tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL;
- /* Clear All PCI Status Error */
- tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL;
- /* Enable All PCI Status Error Interrupts */
- tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL;
-
- /* PCIC Int => IRC IRQ10 */
- tx3927_pcicptr->il = TX3927_IR_PCI;
- /* Target Control (per errata) */
- tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E;
-
- /* Enable Bus Arbiter */
- tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN;
-
- tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_IO |
- PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- }
-#endif /* CONFIG_PCI */
-
/* PIO */
/* PIO[15:12] connected to LEDs */
__raw_writel(0x0000f000, &tx3927_pioptr->dir);