phylib: make local function static
The following functions are not used directly by any drivers:
phy_attach_direct
phy_device_create
phy_prepare_link
genphy_config_advert
genphy_setup_forced
phy_config_interrupt
phy_clear_interrypt
phy_sanitize_settings
phy_enable_interrupts
phy_disable_interrupts
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 1bb16cb..7670aac 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -65,7 +65,7 @@
*
* Returns 0 on success on < 0 on error.
*/
-int phy_clear_interrupt(struct phy_device *phydev)
+static int phy_clear_interrupt(struct phy_device *phydev)
{
int err = 0;
@@ -82,7 +82,7 @@
*
* Returns 0 on success on < 0 on error.
*/
-int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
+static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
{
int err = 0;
@@ -208,7 +208,7 @@
* duplexes. Drop down by one in this order: 1000/FULL,
* 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
*/
-void phy_sanitize_settings(struct phy_device *phydev)
+static void phy_sanitize_settings(struct phy_device *phydev)
{
u32 features = phydev->supported;
int idx;
@@ -223,7 +223,6 @@
phydev->speed = settings[idx].speed;
phydev->duplex = settings[idx].duplex;
}
-EXPORT_SYMBOL(phy_sanitize_settings);
/**
* phy_ethtool_sset - generic ethtool sset function, handles all the details
@@ -532,7 +531,7 @@
* phy_enable_interrupts - Enable the interrupts from the PHY side
* @phydev: target phy_device struct
*/
-int phy_enable_interrupts(struct phy_device *phydev)
+static int phy_enable_interrupts(struct phy_device *phydev)
{
int err;
@@ -545,13 +544,12 @@
return err;
}
-EXPORT_SYMBOL(phy_enable_interrupts);
/**
* phy_disable_interrupts - Disable the PHY interrupts from the PHY side
* @phydev: target phy_device struct
*/
-int phy_disable_interrupts(struct phy_device *phydev)
+static int phy_disable_interrupts(struct phy_device *phydev)
{
int err;
@@ -574,7 +572,6 @@
return err;
}
-EXPORT_SYMBOL(phy_disable_interrupts);
/**
* phy_start_interrupts - request and enable interrupts for a PHY device
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 16ddc77..993c52c 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -57,6 +57,9 @@
static LIST_HEAD(phy_fixup_list);
static DEFINE_MUTEX(phy_fixup_lock);
+static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+ u32 flags, phy_interface_t interface);
+
/*
* Creates a new phy_fixup and adds it to the list
* @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID)
@@ -146,7 +149,8 @@
}
EXPORT_SYMBOL(phy_scan_fixups);
-struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
+static struct phy_device* phy_device_create(struct mii_bus *bus,
+ int addr, int phy_id)
{
struct phy_device *dev;
@@ -193,7 +197,6 @@
return dev;
}
-EXPORT_SYMBOL(phy_device_create);
/**
* get_phy_id - reads the specified addr for its ID.
@@ -316,7 +319,7 @@
* If you want to monitor your own link state, don't call
* this function.
*/
-void phy_prepare_link(struct phy_device *phydev,
+static void phy_prepare_link(struct phy_device *phydev,
void (*handler)(struct net_device *))
{
phydev->adjust_link = handler;
@@ -435,8 +438,8 @@
* the attaching device, and given a callback for link status
* change. The phy_device is returned to the attaching driver.
*/
-int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
- u32 flags, phy_interface_t interface)
+static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+ u32 flags, phy_interface_t interface)
{
struct device *d = &phydev->dev;
@@ -473,7 +476,6 @@
* (dev_flags and interface) */
return phy_init_hw(phydev);
}
-EXPORT_SYMBOL(phy_attach_direct);
/**
* phy_attach - attach a network device to a particular PHY device
@@ -540,7 +542,7 @@
* what is supported. Returns < 0 on error, 0 if the PHY's advertisement
* hasn't changed, and > 0 if it has changed.
*/
-int genphy_config_advert(struct phy_device *phydev)
+static int genphy_config_advert(struct phy_device *phydev)
{
u32 advertise;
int oldadv, adv;
@@ -605,7 +607,6 @@
return changed;
}
-EXPORT_SYMBOL(genphy_config_advert);
/**
* genphy_setup_forced - configures/forces speed/duplex from @phydev
@@ -615,7 +616,7 @@
* to the values in phydev. Assumes that the values are valid.
* Please see phy_sanitize_settings().
*/
-int genphy_setup_forced(struct phy_device *phydev)
+static int genphy_setup_forced(struct phy_device *phydev)
{
int err;
int ctl = 0;