OMAP: DSS2: remove update_mode from omapdss
Remove the whole update_mode stuff from omapdss driver. If automatic
update for manual update displays is needed, it's better implemented in
higher layers.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 9aeea50..18a1b92 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -416,8 +416,6 @@
enum omap_burst_size burst_size;
u32 fifo_low;
u32 fifo_high;
-
- bool manual_update;
};
struct manager_cache_data {
@@ -437,7 +435,6 @@
bool alpha_enabled;
- bool manual_upd_display;
bool manual_update;
bool do_manual_update;
@@ -539,24 +536,15 @@
if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return 0;
+ if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE)
+ return 0;
+
if (dssdev->type == OMAP_DISPLAY_TYPE_VENC
|| dssdev->type == OMAP_DISPLAY_TYPE_HDMI) {
irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
} else {
- if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
- enum omap_dss_update_mode mode;
- mode = dssdev->driver->get_update_mode(dssdev);
- if (mode != OMAP_DSS_UPDATE_AUTO)
- return 0;
-
- irq = (dssdev->manager->id == OMAP_DSS_CHANNEL_LCD) ?
- DISPC_IRQ_FRAMEDONE
- : DISPC_IRQ_FRAMEDONE2;
- } else {
- irq = (dssdev->manager->id == OMAP_DSS_CHANNEL_LCD) ?
- DISPC_IRQ_VSYNC
- : DISPC_IRQ_VSYNC2;
- }
+ irq = (dssdev->manager->id == OMAP_DSS_CHANNEL_LCD) ?
+ DISPC_IRQ_VSYNC : DISPC_IRQ_VSYNC2;
}
mc = &dss_cache.manager_cache[mgr->id];
@@ -617,24 +605,15 @@
if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return 0;
+ if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE)
+ return 0;
+
if (dssdev->type == OMAP_DISPLAY_TYPE_VENC
|| dssdev->type == OMAP_DISPLAY_TYPE_HDMI) {
irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
} else {
- if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
- enum omap_dss_update_mode mode;
- mode = dssdev->driver->get_update_mode(dssdev);
- if (mode != OMAP_DSS_UPDATE_AUTO)
- return 0;
-
- irq = (dssdev->manager->id == OMAP_DSS_CHANNEL_LCD) ?
- DISPC_IRQ_FRAMEDONE
- : DISPC_IRQ_FRAMEDONE2;
- } else {
- irq = (dssdev->manager->id == OMAP_DSS_CHANNEL_LCD) ?
- DISPC_IRQ_VSYNC
- : DISPC_IRQ_VSYNC2;
- }
+ irq = (dssdev->manager->id == OMAP_DSS_CHANNEL_LCD) ?
+ DISPC_IRQ_VSYNC : DISPC_IRQ_VSYNC2;
}
oc = &dss_cache.overlay_cache[ovl->id];
@@ -763,7 +742,7 @@
orig_outw = outw;
orig_outh = outh;
- if (c->manual_update && mc->do_manual_update) {
+ if (mc->manual_update && mc->do_manual_update) {
unsigned bpp;
unsigned scale_x_m = w, scale_x_d = outw;
unsigned scale_y_m = h, scale_y_d = outh;
@@ -928,7 +907,7 @@
if (!oc->dirty)
continue;
- if (oc->manual_update && !mc->do_manual_update)
+ if (mc->manual_update && !mc->do_manual_update)
continue;
if (mgr_busy[oc->channel]) {
@@ -976,7 +955,7 @@
/* We don't need GO with manual update display. LCD iface will
* always be turned off after frame, and new settings will be
* taken in to use at next update */
- if (!mc->manual_upd_display)
+ if (!mc->manual_update)
dispc_go(i);
}
@@ -1302,11 +1281,6 @@
oc->enabled = true;
- oc->manual_update =
- dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE &&
- dssdev->driver->get_update_mode(dssdev) !=
- OMAP_DSS_UPDATE_AUTO;
-
++num_planes_enabled;
}
@@ -1341,13 +1315,8 @@
mc->trans_enabled = mgr->info.trans_enabled;
mc->alpha_enabled = mgr->info.alpha_enabled;
- mc->manual_upd_display =
- dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
-
mc->manual_update =
- dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE &&
- dssdev->driver->get_update_mode(dssdev) !=
- OMAP_DSS_UPDATE_AUTO;
+ dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
}
/* XXX TODO: Try to get fifomerge working. The problem is that it