| /* | 
 |  * max8907-regulator.c -- support regulators in max8907 | 
 |  * | 
 |  * Copyright (C) 2010 Gyungoh Yoo <jack.yoo@maxim-ic.com> | 
 |  * Copyright (C) 2010-2012, NVIDIA CORPORATION. All rights reserved. | 
 |  * | 
 |  * Portions based on drivers/regulator/tps65910-regulator.c, | 
 |  *     Copyright 2010 Texas Instruments Inc. | 
 |  *     Author: Graeme Gregory <gg@slimlogic.co.uk> | 
 |  *     Author: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/err.h> | 
 | #include <linux/init.h> | 
 | #include <linux/mfd/core.h> | 
 | #include <linux/mfd/max8907.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/regulator/driver.h> | 
 | #include <linux/regulator/machine.h> | 
 | #include <linux/regulator/of_regulator.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #define MAX8907_II2RR_VERSION_MASK	0xF0 | 
 | #define MAX8907_II2RR_VERSION_REV_A	0x00 | 
 | #define MAX8907_II2RR_VERSION_REV_B	0x10 | 
 | #define MAX8907_II2RR_VERSION_REV_C	0x30 | 
 |  | 
 | struct max8907_regulator { | 
 | 	struct regulator_desc desc[MAX8907_NUM_REGULATORS]; | 
 | 	struct regulator_dev *rdev[MAX8907_NUM_REGULATORS]; | 
 | }; | 
 |  | 
 | #define REG_MBATT() \ | 
 | 	[MAX8907_MBATT] = { \ | 
 | 		.name = "MBATT", \ | 
 | 		.supply_name = "mbatt", \ | 
 | 		.id = MAX8907_MBATT, \ | 
 | 		.ops = &max8907_mbatt_ops, \ | 
 | 		.type = REGULATOR_VOLTAGE, \ | 
 | 		.owner = THIS_MODULE, \ | 
 | 	} | 
 |  | 
 | #define REG_LDO(ids, supply, base, min, max, step) \ | 
 | 	[MAX8907_##ids] = { \ | 
 | 		.name = #ids, \ | 
 | 		.supply_name = supply, \ | 
 | 		.id = MAX8907_##ids, \ | 
 | 		.n_voltages = ((max) - (min)) / (step) + 1, \ | 
 | 		.ops = &max8907_ldo_ops, \ | 
 | 		.type = REGULATOR_VOLTAGE, \ | 
 | 		.owner = THIS_MODULE, \ | 
 | 		.min_uV = (min), \ | 
 | 		.uV_step = (step), \ | 
 | 		.vsel_reg = (base) + MAX8907_VOUT, \ | 
 | 		.vsel_mask = 0x3f, \ | 
 | 		.enable_reg = (base) + MAX8907_CTL, \ | 
 | 		.enable_mask = MAX8907_MASK_LDO_EN, \ | 
 | 	} | 
 |  | 
 | #define REG_FIXED(ids, supply, voltage) \ | 
 | 	[MAX8907_##ids] = { \ | 
 | 		.name = #ids, \ | 
 | 		.supply_name = supply, \ | 
 | 		.id = MAX8907_##ids, \ | 
 | 		.n_voltages = 1, \ | 
 | 		.ops = &max8907_fixed_ops, \ | 
 | 		.type = REGULATOR_VOLTAGE, \ | 
 | 		.owner = THIS_MODULE, \ | 
 | 		.min_uV = (voltage), \ | 
 | 	} | 
 |  | 
 | #define REG_OUT5V(ids, supply, base, voltage) \ | 
 | 	[MAX8907_##ids] = { \ | 
 | 		.name = #ids, \ | 
 | 		.supply_name = supply, \ | 
 | 		.id = MAX8907_##ids, \ | 
 | 		.n_voltages = 1, \ | 
 | 		.ops = &max8907_out5v_ops, \ | 
 | 		.type = REGULATOR_VOLTAGE, \ | 
 | 		.owner = THIS_MODULE, \ | 
 | 		.min_uV = (voltage), \ | 
 | 		.enable_reg = (base), \ | 
 | 		.enable_mask = MAX8907_MASK_OUT5V_EN, \ | 
 | 	} | 
 |  | 
 | #define REG_BBAT(ids, supply, base, min, max, step) \ | 
 | 	[MAX8907_##ids] = { \ | 
 | 		.name = #ids, \ | 
 | 		.supply_name = supply, \ | 
 | 		.id = MAX8907_##ids, \ | 
 | 		.n_voltages = ((max) - (min)) / (step) + 1, \ | 
 | 		.ops = &max8907_bbat_ops, \ | 
 | 		.type = REGULATOR_VOLTAGE, \ | 
 | 		.owner = THIS_MODULE, \ | 
 | 		.min_uV = (min), \ | 
 | 		.uV_step = (step), \ | 
 | 		.vsel_reg = (base), \ | 
 | 		.vsel_mask = MAX8907_MASK_VBBATTCV, \ | 
 | 	} | 
 |  | 
 | #define LDO_750_50(id, supply, base) REG_LDO(id, supply, (base), \ | 
 | 			750000, 3900000, 50000) | 
 | #define LDO_650_25(id, supply, base) REG_LDO(id, supply, (base), \ | 
 | 			650000, 2225000, 25000) | 
 |  | 
 | static struct regulator_ops max8907_mbatt_ops = { | 
 | }; | 
 |  | 
 | static struct regulator_ops max8907_ldo_ops = { | 
 | 	.list_voltage = regulator_list_voltage_linear, | 
 | 	.set_voltage_sel = regulator_set_voltage_sel_regmap, | 
 | 	.get_voltage_sel = regulator_get_voltage_sel_regmap, | 
 | 	.enable = regulator_enable_regmap, | 
 | 	.disable = regulator_disable_regmap, | 
 | 	.is_enabled = regulator_is_enabled_regmap, | 
 | }; | 
 |  | 
 | static struct regulator_ops max8907_ldo_hwctl_ops = { | 
 | 	.list_voltage = regulator_list_voltage_linear, | 
 | 	.set_voltage_sel = regulator_set_voltage_sel_regmap, | 
 | 	.get_voltage_sel = regulator_get_voltage_sel_regmap, | 
 | }; | 
 |  | 
 | static struct regulator_ops max8907_fixed_ops = { | 
 | 	.list_voltage = regulator_list_voltage_linear, | 
 | }; | 
 |  | 
 | static struct regulator_ops max8907_out5v_ops = { | 
 | 	.list_voltage = regulator_list_voltage_linear, | 
 | 	.enable = regulator_enable_regmap, | 
 | 	.disable = regulator_disable_regmap, | 
 | 	.is_enabled = regulator_is_enabled_regmap, | 
 | }; | 
 |  | 
 | static struct regulator_ops max8907_out5v_hwctl_ops = { | 
 | 	.list_voltage = regulator_list_voltage_linear, | 
 | }; | 
 |  | 
 | static struct regulator_ops max8907_bbat_ops = { | 
 | 	.list_voltage = regulator_list_voltage_linear, | 
 | 	.set_voltage_sel = regulator_set_voltage_sel_regmap, | 
 | 	.get_voltage_sel = regulator_get_voltage_sel_regmap, | 
 | }; | 
 |  | 
 | static struct regulator_desc max8907_regulators[] = { | 
 | 	REG_MBATT(), | 
 | 	REG_LDO(SD1, "in-v1", MAX8907_REG_SDCTL1, 650000, 2225000, 25000), | 
 | 	REG_LDO(SD2, "in-v2", MAX8907_REG_SDCTL2, 637500, 1425000, 12500), | 
 | 	REG_LDO(SD3, "in-v3", MAX8907_REG_SDCTL3, 750000, 3900000, 50000), | 
 | 	LDO_750_50(LDO1, "in1", MAX8907_REG_LDOCTL1), | 
 | 	LDO_650_25(LDO2, "in2", MAX8907_REG_LDOCTL2), | 
 | 	LDO_650_25(LDO3, "in3", MAX8907_REG_LDOCTL3), | 
 | 	LDO_750_50(LDO4, "in4", MAX8907_REG_LDOCTL4), | 
 | 	LDO_750_50(LDO5, "in5", MAX8907_REG_LDOCTL5), | 
 | 	LDO_750_50(LDO6, "in6", MAX8907_REG_LDOCTL6), | 
 | 	LDO_750_50(LDO7, "in7", MAX8907_REG_LDOCTL7), | 
 | 	LDO_750_50(LDO8, "in8", MAX8907_REG_LDOCTL8), | 
 | 	LDO_750_50(LDO9, "in9", MAX8907_REG_LDOCTL9), | 
 | 	LDO_750_50(LDO10, "in10", MAX8907_REG_LDOCTL10), | 
 | 	LDO_750_50(LDO11, "in11", MAX8907_REG_LDOCTL11), | 
 | 	LDO_750_50(LDO12, "in12", MAX8907_REG_LDOCTL12), | 
 | 	LDO_750_50(LDO13, "in13", MAX8907_REG_LDOCTL13), | 
 | 	LDO_750_50(LDO14, "in14", MAX8907_REG_LDOCTL14), | 
 | 	LDO_750_50(LDO15, "in15", MAX8907_REG_LDOCTL15), | 
 | 	LDO_750_50(LDO16, "in16", MAX8907_REG_LDOCTL16), | 
 | 	LDO_650_25(LDO17, "in17", MAX8907_REG_LDOCTL17), | 
 | 	LDO_650_25(LDO18, "in18", MAX8907_REG_LDOCTL18), | 
 | 	LDO_750_50(LDO19, "in19", MAX8907_REG_LDOCTL19), | 
 | 	LDO_750_50(LDO20, "in20", MAX8907_REG_LDOCTL20), | 
 | 	REG_OUT5V(OUT5V, "mbatt", MAX8907_REG_OUT5VEN, 5000000), | 
 | 	REG_OUT5V(OUT33V, "mbatt",  MAX8907_REG_OUT33VEN, 3300000), | 
 | 	REG_BBAT(BBAT, "MBATT", MAX8907_REG_BBAT_CNFG, | 
 | 						2400000, 3000000, 200000), | 
 | 	REG_FIXED(SDBY, "MBATT", 1200000), | 
 | 	REG_FIXED(VRTC, "MBATT", 3300000), | 
 | }; | 
 |  | 
 | #ifdef CONFIG_OF | 
 |  | 
 | #define MATCH(_name, _id) \ | 
 | 	[MAX8907_##_id] = { \ | 
 | 		.name = #_name, \ | 
 | 		.driver_data = (void *)&max8907_regulators[MAX8907_##_id], \ | 
 | 	} | 
 |  | 
 | static struct of_regulator_match max8907_matches[] = { | 
 | 	MATCH(mbatt, MBATT), | 
 | 	MATCH(sd1, SD1), | 
 | 	MATCH(sd2, SD2), | 
 | 	MATCH(sd3, SD3), | 
 | 	MATCH(ldo1, LDO1), | 
 | 	MATCH(ldo2, LDO2), | 
 | 	MATCH(ldo3, LDO3), | 
 | 	MATCH(ldo4, LDO4), | 
 | 	MATCH(ldo5, LDO5), | 
 | 	MATCH(ldo6, LDO6), | 
 | 	MATCH(ldo7, LDO7), | 
 | 	MATCH(ldo8, LDO8), | 
 | 	MATCH(ldo9, LDO9), | 
 | 	MATCH(ldo10, LDO10), | 
 | 	MATCH(ldo11, LDO11), | 
 | 	MATCH(ldo12, LDO12), | 
 | 	MATCH(ldo13, LDO13), | 
 | 	MATCH(ldo14, LDO14), | 
 | 	MATCH(ldo15, LDO15), | 
 | 	MATCH(ldo16, LDO16), | 
 | 	MATCH(ldo17, LDO17), | 
 | 	MATCH(ldo18, LDO18), | 
 | 	MATCH(ldo19, LDO19), | 
 | 	MATCH(ldo20, LDO20), | 
 | 	MATCH(out5v, OUT5V), | 
 | 	MATCH(out33v, OUT33V), | 
 | 	MATCH(bbat, BBAT), | 
 | 	MATCH(sdby, SDBY), | 
 | 	MATCH(vrtc, VRTC), | 
 | }; | 
 |  | 
 | static int max8907_regulator_parse_dt(struct platform_device *pdev) | 
 | { | 
 | 	struct device_node *np, *regulators; | 
 | 	int ret; | 
 |  | 
 | 	np = of_node_get(pdev->dev.parent->of_node); | 
 | 	if (!np) | 
 | 		return 0; | 
 |  | 
 | 	regulators = of_find_node_by_name(np, "regulators"); | 
 | 	if (!regulators) { | 
 | 		dev_err(&pdev->dev, "regulators node not found\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	ret = of_regulator_match(&pdev->dev, regulators, max8907_matches, | 
 | 				 ARRAY_SIZE(max8907_matches)); | 
 | 	of_node_put(regulators); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", | 
 | 			ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline struct regulator_init_data *match_init_data(int index) | 
 | { | 
 | 	return max8907_matches[index].init_data; | 
 | } | 
 |  | 
 | static inline struct device_node *match_of_node(int index) | 
 | { | 
 | 	return max8907_matches[index].of_node; | 
 | } | 
 | #else | 
 | static int max8907_regulator_parse_dt(struct platform_device *pdev) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline struct regulator_init_data *match_init_data(int index) | 
 | { | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static inline struct device_node *match_of_node(int index) | 
 | { | 
 | 	return NULL; | 
 | } | 
 | #endif | 
 |  | 
 | static int max8907_regulator_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct max8907 *max8907 = dev_get_drvdata(pdev->dev.parent); | 
 | 	struct max8907_platform_data *pdata = dev_get_platdata(max8907->dev); | 
 | 	int ret; | 
 | 	struct max8907_regulator *pmic; | 
 | 	unsigned int val; | 
 | 	int i; | 
 | 	struct regulator_config config = {}; | 
 | 	struct regulator_init_data *idata; | 
 | 	const char *mbatt_rail_name = NULL; | 
 |  | 
 | 	ret = max8907_regulator_parse_dt(pdev); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL); | 
 | 	if (!pmic) { | 
 | 		dev_err(&pdev->dev, "Failed to alloc pmic\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	platform_set_drvdata(pdev, pmic); | 
 |  | 
 | 	memcpy(pmic->desc, max8907_regulators, sizeof(pmic->desc)); | 
 |  | 
 | 	/* Backwards compatibility with MAX8907B; SD1 uses different voltages */ | 
 | 	regmap_read(max8907->regmap_gen, MAX8907_REG_II2RR, &val); | 
 | 	if ((val & MAX8907_II2RR_VERSION_MASK) == | 
 | 	    MAX8907_II2RR_VERSION_REV_B) { | 
 | 		pmic->desc[MAX8907_SD1].min_uV = 637500; | 
 | 		pmic->desc[MAX8907_SD1].uV_step = 12500; | 
 | 		pmic->desc[MAX8907_SD1].n_voltages = | 
 | 						(1425000 - 637500) / 12500 + 1; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < MAX8907_NUM_REGULATORS; i++) { | 
 | 		config.dev = pdev->dev.parent; | 
 | 		if (pdata) | 
 | 			idata = pdata->init_data[i]; | 
 | 		else | 
 | 			idata = match_init_data(i); | 
 | 		config.init_data = idata; | 
 | 		config.driver_data = pmic; | 
 | 		config.regmap = max8907->regmap_gen; | 
 | 		config.of_node = match_of_node(i); | 
 |  | 
 | 		switch (pmic->desc[i].id) { | 
 | 		case MAX8907_MBATT: | 
 | 			if (idata && idata->constraints.name) | 
 | 				mbatt_rail_name = idata->constraints.name; | 
 | 			else | 
 | 				mbatt_rail_name = pmic->desc[i].name; | 
 | 			break; | 
 | 		case MAX8907_BBAT: | 
 | 		case MAX8907_SDBY: | 
 | 		case MAX8907_VRTC: | 
 | 			idata->supply_regulator = mbatt_rail_name; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (pmic->desc[i].ops == &max8907_ldo_ops) { | 
 | 			regmap_read(config.regmap, pmic->desc[i].enable_reg, | 
 | 				    &val); | 
 | 			if ((val & MAX8907_MASK_LDO_SEQ) != | 
 | 			    MAX8907_MASK_LDO_SEQ) | 
 | 				pmic->desc[i].ops = &max8907_ldo_hwctl_ops; | 
 | 		} else if (pmic->desc[i].ops == &max8907_out5v_ops) { | 
 | 			regmap_read(config.regmap, pmic->desc[i].enable_reg, | 
 | 				    &val); | 
 | 			if ((val & (MAX8907_MASK_OUT5V_VINEN | | 
 | 						MAX8907_MASK_OUT5V_ENSRC)) != | 
 | 			    MAX8907_MASK_OUT5V_ENSRC) | 
 | 				pmic->desc[i].ops = &max8907_out5v_hwctl_ops; | 
 | 		} | 
 |  | 
 | 		pmic->rdev[i] = regulator_register(&pmic->desc[i], &config); | 
 | 		if (IS_ERR(pmic->rdev[i])) { | 
 | 			dev_err(&pdev->dev, | 
 | 				"failed to register %s regulator\n", | 
 | 				pmic->desc[i].name); | 
 | 			ret = PTR_ERR(pmic->rdev[i]); | 
 | 			goto err_unregister_regulator; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_unregister_regulator: | 
 | 	while (--i >= 0) | 
 | 		regulator_unregister(pmic->rdev[i]); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int max8907_regulator_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct max8907_regulator *pmic = platform_get_drvdata(pdev); | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < MAX8907_NUM_REGULATORS; i++) | 
 | 		regulator_unregister(pmic->rdev[i]); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver max8907_regulator_driver = { | 
 | 	.driver = { | 
 | 		   .name = "max8907-regulator", | 
 | 		   .owner = THIS_MODULE, | 
 | 		   }, | 
 | 	.probe = max8907_regulator_probe, | 
 | 	.remove = max8907_regulator_remove, | 
 | }; | 
 |  | 
 | static int __init max8907_regulator_init(void) | 
 | { | 
 | 	return platform_driver_register(&max8907_regulator_driver); | 
 | } | 
 |  | 
 | subsys_initcall(max8907_regulator_init); | 
 |  | 
 | static void __exit max8907_reg_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&max8907_regulator_driver); | 
 | } | 
 |  | 
 | module_exit(max8907_reg_exit); | 
 |  | 
 | MODULE_DESCRIPTION("MAX8907 regulator driver"); | 
 | MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@maxim-ic.com>"); | 
 | MODULE_LICENSE("GPL v2"); | 
 | MODULE_ALIAS("platform:max8907-regulator"); |