[PATCH] lindent rio drivers

Run all rio files through indent -kr -i8 -bri0 -l255, as requested by Alan.

rioboot.c and rioinit.c were skipped due to worrisome lindent warnings.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/char/rio/port.h b/drivers/char/rio/port.h
index 8506af0..c99b1e7 100644
--- a/drivers/char/rio/port.h
+++ b/drivers/char/rio/port.h
@@ -46,96 +46,94 @@
 */
 
 #ifdef STATS
-struct RIOStats
-{
+struct RIOStats {
 	/*
-	** interrupt statistics
-	*/
-	uint	BreakIntCnt;
-	uint	ModemOffCnt;
-	uint	ModemOnCnt;
-	uint	RxIntCnt;
-	uint	TxIntCnt;
+	 ** interrupt statistics
+	 */
+	uint BreakIntCnt;
+	uint ModemOffCnt;
+	uint ModemOnCnt;
+	uint RxIntCnt;
+	uint TxIntCnt;
 	/*
-	** throughput statistics
-	*/
-	uint	RxCharCnt;
-	uint	RxPktCnt;
-	uint	RxSaveCnt;
-	uint	TxCharCnt;
-	uint	TxPktCnt;
+	 ** throughput statistics
+	 */
+	uint RxCharCnt;
+	uint RxPktCnt;
+	uint RxSaveCnt;
+	uint TxCharCnt;
+	uint TxPktCnt;
 	/*
-	** driver entry statistics
-	*/
-	uint	CloseCnt;
-	uint	IoctlCnt;
-	uint	OpenCnt;
-	uint	ReadCnt;
-	uint	WriteCnt;
+	 ** driver entry statistics
+	 */
+	uint CloseCnt;
+	uint IoctlCnt;
+	uint OpenCnt;
+	uint ReadCnt;
+	uint WriteCnt;
 	/*
-	** proc statistics
-	*/
-	uint	BlockCnt;
-	uint	OutputCnt;
-	uint	ResumeCnt;
-	uint	RflushCnt;
-	uint	SuspendCnt;
-	uint	TbreakCnt;
-	uint	TimeoutCnt;
-	uint	UnblockCnt;
-	uint	WflushCnt;
-	uint	WFBodgeCnt;
+	 ** proc statistics
+	 */
+	uint BlockCnt;
+	uint OutputCnt;
+	uint ResumeCnt;
+	uint RflushCnt;
+	uint SuspendCnt;
+	uint TbreakCnt;
+	uint TimeoutCnt;
+	uint UnblockCnt;
+	uint WflushCnt;
+	uint WFBodgeCnt;
 };
 #endif
 
 /*
 **	Port data structure
 */
-struct	Port
-{
-  struct gs_port gs; 
-  int				PortNum;	/* RIO port no., 0-511 */
-  struct Host	*HostP;
-  volatile caddr_t		Caddr;
-  ushort			HostPort;  /* Port number on host card */
-  uchar			RupNum;	/* Number of RUP for port */
-  uchar			ID2;	/* Second ID of RTA for port */
-  ulong			State;	/* FLAGS for open & xopen */
-#define	RIO_LOPEN	0x00001		/* Local open */
-#define	RIO_MOPEN	0x00002		/* Modem open */
-#define	RIO_WOPEN	0x00004		/* Waiting for open */
-#define	RIO_CLOSING	0x00008		/* The port is being close */
-#define	RIO_XPBUSY	0x00010		/* Transparent printer busy */
-#define	RIO_BREAKING	0x00020		/* Break in progress */
-#define	RIO_DIRECT	0x00040		/* Doing Direct output */
-#define	RIO_EXCLUSIVE	0x00080		/* Stream open for exclusive use */
-#define	RIO_NDELAY	0x00100		/* Stream is open FNDELAY */
-#define	RIO_CARR_ON	0x00200		/* Stream has carrier present */
-#define	RIO_XPWANTR	0x00400		/* Stream wanted by Xprint */
-#define	RIO_RBLK	0x00800		/* Stream is read-blocked */
-#define	RIO_BUSY	0x01000		/* Stream is BUSY for write */
-#define	RIO_TIMEOUT	0x02000		/* Stream timeout in progress */
-#define	RIO_TXSTOP	0x04000		/* Stream output is stopped */
-#define	RIO_WAITFLUSH	0x08000		/* Stream waiting for flush */
-#define	RIO_DYNOROD	0x10000		/* Drain failed */
-#define	RIO_DELETED	0x20000		/* RTA has been deleted */
-#define RIO_ISSCANCODE	0x40000		/* This line is in scancode mode */
+struct Port {
+	struct gs_port gs;
+	int PortNum;		/* RIO port no., 0-511 */
+	struct Host *HostP;
+	volatile caddr_t Caddr;
+	ushort HostPort;	/* Port number on host card */
+	uchar RupNum;		/* Number of RUP for port */
+	uchar ID2;		/* Second ID of RTA for port */
+	ulong State;		/* FLAGS for open & xopen */
+#define	RIO_LOPEN	0x00001	/* Local open */
+#define	RIO_MOPEN	0x00002	/* Modem open */
+#define	RIO_WOPEN	0x00004	/* Waiting for open */
+#define	RIO_CLOSING	0x00008	/* The port is being close */
+#define	RIO_XPBUSY	0x00010	/* Transparent printer busy */
+#define	RIO_BREAKING	0x00020	/* Break in progress */
+#define	RIO_DIRECT	0x00040	/* Doing Direct output */
+#define	RIO_EXCLUSIVE	0x00080	/* Stream open for exclusive use */
+#define	RIO_NDELAY	0x00100	/* Stream is open FNDELAY */
+#define	RIO_CARR_ON	0x00200	/* Stream has carrier present */
+#define	RIO_XPWANTR	0x00400	/* Stream wanted by Xprint */
+#define	RIO_RBLK	0x00800	/* Stream is read-blocked */
+#define	RIO_BUSY	0x01000	/* Stream is BUSY for write */
+#define	RIO_TIMEOUT	0x02000	/* Stream timeout in progress */
+#define	RIO_TXSTOP	0x04000	/* Stream output is stopped */
+#define	RIO_WAITFLUSH	0x08000	/* Stream waiting for flush */
+#define	RIO_DYNOROD	0x10000	/* Drain failed */
+#define	RIO_DELETED	0x20000	/* RTA has been deleted */
+#define RIO_ISSCANCODE	0x40000	/* This line is in scancode mode */
 #define	RIO_USING_EUC	0x100000	/* Using extended Unix chars */
 #define	RIO_CAN_COOK	0x200000	/* This line can do cooking */
-#define RIO_TRIAD_MODE  0x400000        /* Enable TRIAD special ops. */
-#define RIO_TRIAD_BLOCK 0x800000        /* Next read will block */
-#define RIO_TRIAD_FUNC  0x1000000       /* Seen a function key coming in */
-#define RIO_THROTTLE_RX 0x2000000       /* RX needs to be throttled. */
+#define RIO_TRIAD_MODE  0x400000	/* Enable TRIAD special ops. */
+#define RIO_TRIAD_BLOCK 0x800000	/* Next read will block */
+#define RIO_TRIAD_FUNC  0x1000000	/* Seen a function key coming in */
+#define RIO_THROTTLE_RX 0x2000000	/* RX needs to be throttled. */
 
-    ulong			Config;	/* FLAGS for NOREAD.... */
-#define	RIO_NOREAD	0x0001		/* Are not allowed to read port */
-#define	RIO_NOWRITE	0x0002		/* Are not allowed to write port */
-#define	RIO_NOXPRINT	0x0004		/* Are not allowed to xprint port */
-#define	RIO_NOMASK	0x0007		/* All not allowed things */
-#define RIO_IXANY	0x0008          /* Port is allowed ixany */
-#define	RIO_MODEM	0x0010		/* Stream is a modem device */
-#define	RIO_IXON	0x0020		/* Port is allowed ixon */
-#define RIO_WAITDRAIN	0x0040		/* Wait for port to completely drain */
+	ulong Config;		/* FLAGS for NOREAD.... */
+#define	RIO_NOREAD	0x0001	/* Are not allowed to read port */
+#define	RIO_NOWRITE	0x0002	/* Are not allowed to write port */
+#define	RIO_NOXPRINT	0x0004	/* Are not allowed to xprint port */
+#define	RIO_NOMASK	0x0007	/* All not allowed things */
+#define RIO_IXANY	0x0008	/* Port is allowed ixany */
+#define	RIO_MODEM	0x0010	/* Stream is a modem device */
+#define	RIO_IXON	0x0020	/* Port is allowed ixon */
+#define RIO_WAITDRAIN	0x0040	/* Wait for port to completely drain */
 #define RIO_MAP_50_TO_50	0x0080	/* Map 50 baud to 50 baud */
 #define RIO_MAP_110_TO_110	0x0100	/* Map 110 baud to 110 baud */
 
@@ -144,92 +142,90 @@
 ** As LynxOS does not appear to support Hardware Flow Control .....
 ** Define our own flow control flags in 'Config'.
 */
-#define RIO_CTSFLOW	0x0200		/* RIO's own CTSFLOW flag */
-#define RIO_RTSFLOW	0x0400		/* RIO's own RTSFLOW flag */
+#define RIO_CTSFLOW	0x0200	/* RIO's own CTSFLOW flag */
+#define RIO_RTSFLOW	0x0400	/* RIO's own RTSFLOW flag */
 
 
-    struct PHB			*PhbP;	  /* pointer to PHB for port */
-    WORD                        *TxAdd;   /* Add packets here */
-    WORD                        *TxStart; /* Start of add array */
-    WORD                        *TxEnd;         /* End of add array */
-    WORD                        *RxRemove;      /* Remove packets here */
-    WORD                        *RxStart;       /* Start of remove array */
-    WORD                        *RxEnd;         /* End of remove array */
-    uint			RtaUniqueNum;	/* Unique number of RTA */
-    ushort			PortState;	/* status of port */
-    ushort			ModemState;	/* status of modem lines */
-    ulong			ModemLines;	/* Modem bits sent to RTA */
-    uchar			CookMode;	/* who expands CR/LF? */
-    uchar			ParamSem;	/* Prevent write during param */
-    uchar			Mapped;		/* if port mapped onto host */
-    uchar			SecondBlock;	/* if port belongs to 2nd block
-						   of 16 port RTA */
-    uchar			InUse;		/* how many pre-emptive cmds */
-    uchar			Lock;		/* if params locked */
-    uchar			Store;	/* if params stored across closes */
-    uchar			FirstOpen; /* TRUE if first time port opened */
-    uchar			FlushCmdBodge;	/* if doing a (non)flush */
-    uchar			MagicFlags;	/* require intr processing */
+	struct PHB *PhbP;	/* pointer to PHB for port */
+	WORD *TxAdd;		/* Add packets here */
+	WORD *TxStart;		/* Start of add array */
+	WORD *TxEnd;		/* End of add array */
+	WORD *RxRemove;		/* Remove packets here */
+	WORD *RxStart;		/* Start of remove array */
+	WORD *RxEnd;		/* End of remove array */
+	uint RtaUniqueNum;	/* Unique number of RTA */
+	ushort PortState;	/* status of port */
+	ushort ModemState;	/* status of modem lines */
+	ulong ModemLines;	/* Modem bits sent to RTA */
+	uchar CookMode;		/* who expands CR/LF? */
+	uchar ParamSem;		/* Prevent write during param */
+	uchar Mapped;		/* if port mapped onto host */
+	uchar SecondBlock;	/* if port belongs to 2nd block
+				   of 16 port RTA */
+	uchar InUse;		/* how many pre-emptive cmds */
+	uchar Lock;		/* if params locked */
+	uchar Store;		/* if params stored across closes */
+	uchar FirstOpen;	/* TRUE if first time port opened */
+	uchar FlushCmdBodge;	/* if doing a (non)flush */
+	uchar MagicFlags;	/* require intr processing */
 #define	MAGIC_FLUSH	0x01	/* mirror of WflushFlag */
 #define	MAGIC_REBOOT	0x02	/* RTA re-booted, re-open ports */
 #define	MORE_OUTPUT_EYGOR 0x04	/* riotproc failed to empty clists */
-    uchar			WflushFlag;	/* 1 How many WFLUSHs active */
+	uchar WflushFlag;	/* 1 How many WFLUSHs active */
 /*
 ** Transparent print stuff
 */
-    struct Xprint
-    {
+	struct Xprint {
 #ifndef MAX_XP_CTRL_LEN
-#define MAX_XP_CTRL_LEN		16		/* ALSO IN DAEMON.H */
+#define MAX_XP_CTRL_LEN		16	/* ALSO IN DAEMON.H */
 #endif
-	uint			XpCps;
-	char			XpOn[MAX_XP_CTRL_LEN];
-	char			XpOff[MAX_XP_CTRL_LEN];
-	ushort			XpLen;		/* strlen(XpOn)+strlen(XpOff) */
-	uchar			XpActive;
-	uchar			XpLastTickOk;	/* TRUE if we can process */
+		uint XpCps;
+		char XpOn[MAX_XP_CTRL_LEN];
+		char XpOff[MAX_XP_CTRL_LEN];
+		ushort XpLen;	/* strlen(XpOn)+strlen(XpOff) */
+		uchar XpActive;
+		uchar XpLastTickOk;	/* TRUE if we can process */
 #define	XP_OPEN		00001
 #define	XP_RUNABLE	00002
-	struct ttystatics 		*XttyP;
-    } Xprint;
+		struct ttystatics *XttyP;
+	} Xprint;
 #ifdef VPIX
-    v86_t			*StashP;
-    uint			IntMask;
-    struct termss 		VpixSs;
-    uchar			ModemStatusReg;	/* Modem status register */
+	v86_t *StashP;
+	uint IntMask;
+	struct termss VpixSs;
+	uchar ModemStatusReg;	/* Modem status register */
 #endif
-    uchar			RxDataStart;
-    uchar			Cor2Copy;	/* copy of COR2 */
-    char			*Name;		/* points to the Rta's name */
+	uchar RxDataStart;
+	uchar Cor2Copy;		/* copy of COR2 */
+	char *Name;		/* points to the Rta's name */
 #ifdef STATS
-    struct RIOStats 		Stat;		/* ports statistics */
+	struct RIOStats Stat;	/* ports statistics */
 #endif
-    char			*TxRingBuffer;
-    ushort			TxBufferIn;	/* New data arrives here */
-    ushort			TxBufferOut;	/* Intr removes data here */
-    ushort			OldTxBufferOut;	/* Indicates if draining */
-    int				TimeoutId;	/* Timeout ID */
-    uint			Debug;
-    uchar			WaitUntilBooted; /* True if open should block */
-    uint			statsGather;	/* True if gathering stats */
-    ulong			txchars;	/* Chars transmitted */
-    ulong			rxchars;	/* Chars received */
-    ulong			opens;		/* port open count */
-    ulong			closes;		/* port close count */
-    ulong			ioctls;		/* ioctl count */
-    uchar			LastRxTgl;	/* Last state of rx toggle bit */
-  spinlock_t				portSem;	/* Lock using this sem */
-	int				MonitorTstate;	/* Monitoring ? */
-	int				timeout_id;	/* For calling 100 ms delays */
-	int				timeout_sem;/* For calling 100 ms delays */
-	int				firstOpen;	/* First time open ? */
-	char *			p;			/* save the global struc here .. */
+	char *TxRingBuffer;
+	ushort TxBufferIn;	/* New data arrives here */
+	ushort TxBufferOut;	/* Intr removes data here */
+	ushort OldTxBufferOut;	/* Indicates if draining */
+	int TimeoutId;		/* Timeout ID */
+	uint Debug;
+	uchar WaitUntilBooted;	/* True if open should block */
+	uint statsGather;	/* True if gathering stats */
+	ulong txchars;		/* Chars transmitted */
+	ulong rxchars;		/* Chars received */
+	ulong opens;		/* port open count */
+	ulong closes;		/* port close count */
+	ulong ioctls;		/* ioctl count */
+	uchar LastRxTgl;	/* Last state of rx toggle bit */
+	spinlock_t portSem;	/* Lock using this sem */
+	int MonitorTstate;	/* Monitoring ? */
+	int timeout_id;		/* For calling 100 ms delays */
+	int timeout_sem;	/* For calling 100 ms delays */
+	int firstOpen;		/* First time open ? */
+	char *p;		/* save the global struc here .. */
 };
 
-struct ModuleInfo
-{
-	char	*Name;
-	uint	Flags[4];	/* one per port on a module */
+struct ModuleInfo {
+	char *Name;
+	uint Flags[4];		/* one per port on a module */
 };
 #endif
 
@@ -238,8 +234,8 @@
 ** runs into problems with differing struct sizes between driver and config.
 */
 struct PortParams {
-	uint	Port;
-	ulong	Config;
-	ulong	State;
-	struct ttystatics	*TtyP;
+	uint Port;
+	ulong Config;
+	ulong State;
+	struct ttystatics *TtyP;
 };