[PATCH] lindent rio drivers
Run all rio files through indent -kr -i8 -bri0 -l255, as requested by Alan.
rioboot.c and rioinit.c were skipped due to worrisome lindent warnings.
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/char/rio/riotable.c b/drivers/char/rio/riotable.c
index e45bc27..42c3dffc 100644
--- a/drivers/char/rio/riotable.c
+++ b/drivers/char/rio/riotable.c
@@ -91,9 +91,8 @@
** A configuration table has been loaded. It is now up to us
** to sort it out and use the information contained therein.
*/
-int
-RIONewTable(p)
-struct rio_info * p;
+int RIONewTable(p)
+struct rio_info *p;
{
int Host, Host1, Host2, NameIsUnique, Entry, SubEnt;
struct Map *MapP;
@@ -103,26 +102,26 @@
char *cptr;
/*
- ** We have been sent a new table to install. We need to break
- ** it down into little bits and spread it around a bit to see
- ** what we have got.
- */
+ ** We have been sent a new table to install. We need to break
+ ** it down into little bits and spread it around a bit to see
+ ** what we have got.
+ */
/*
- ** Things to check:
- ** (things marked 'xx' aren't checked any more!)
- ** (1) That there are no booted Hosts/RTAs out there.
- ** (2) That the names are properly formed
- ** (3) That blank entries really are.
- ** xx (4) That hosts mentioned in the table actually exist. xx
- ** (5) That the IDs are unique (per host).
- ** (6) That host IDs are zero
- ** (7) That port numbers are valid
- ** (8) That port numbers aren't duplicated
- ** (9) That names aren't duplicated
- ** xx (10) That hosts that actually exist are mentioned in the table. xx
- */
- rio_dprintk (RIO_DEBUG_TABLE, "RIONewTable: entering(1)\n");
- if ( p->RIOSystemUp ) { /* (1) */
+ ** Things to check:
+ ** (things marked 'xx' aren't checked any more!)
+ ** (1) That there are no booted Hosts/RTAs out there.
+ ** (2) That the names are properly formed
+ ** (3) That blank entries really are.
+ ** xx (4) That hosts mentioned in the table actually exist. xx
+ ** (5) That the IDs are unique (per host).
+ ** (6) That host IDs are zero
+ ** (7) That port numbers are valid
+ ** (8) That port numbers aren't duplicated
+ ** (9) That names aren't duplicated
+ ** xx (10) That hosts that actually exist are mentioned in the table. xx
+ */
+ rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(1)\n");
+ if (p->RIOSystemUp) { /* (1) */
p->RIOError.Error = HOST_HAS_ALREADY_BEEN_BOOTED;
return -EBUSY;
}
@@ -131,19 +130,19 @@
p->RIOError.Entry = -1;
p->RIOError.Other = -1;
- for ( Entry=0; Entry<TOTAL_MAP_ENTRIES; Entry++ ) {
+ for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) {
MapP = &p->RIOConnectTable[Entry];
if ((MapP->Flags & RTA16_SECOND_SLOT) == 0) {
- rio_dprintk (RIO_DEBUG_TABLE, "RIONewTable: entering(2)\n");
- cptr = MapP->Name; /* (2) */
- cptr[MAX_NAME_LEN-1]='\0';
- if ( cptr[0]=='\0' ) {
- bcopy(MapP->RtaUniqueNum?"RTA NN":"HOST NN",MapP->Name,8);
- MapP->Name[5] = '0'+Entry/10;
- MapP->Name[6] = '0'+Entry%10;
+ rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(2)\n");
+ cptr = MapP->Name; /* (2) */
+ cptr[MAX_NAME_LEN - 1] = '\0';
+ if (cptr[0] == '\0') {
+ bcopy(MapP->RtaUniqueNum ? "RTA NN" : "HOST NN", MapP->Name, 8);
+ MapP->Name[5] = '0' + Entry / 10;
+ MapP->Name[6] = '0' + Entry % 10;
}
- while ( *cptr ) {
- if ( *cptr<' ' || *cptr>'~' ) {
+ while (*cptr) {
+ if (*cptr < ' ' || *cptr > '~') {
p->RIOError.Error = BAD_CHARACTER_IN_NAME;
p->RIOError.Entry = Entry;
return -ENXIO;
@@ -153,133 +152,119 @@
}
/*
- ** If the entry saved was a tentative entry then just forget
- ** about it.
- */
- if ( MapP->Flags & SLOT_TENTATIVE ) {
+ ** If the entry saved was a tentative entry then just forget
+ ** about it.
+ */
+ if (MapP->Flags & SLOT_TENTATIVE) {
MapP->HostUniqueNum = 0;
MapP->RtaUniqueNum = 0;
continue;
}
- rio_dprintk (RIO_DEBUG_TABLE, "RIONewTable: entering(3)\n");
- if ( !MapP->RtaUniqueNum && !MapP->HostUniqueNum ) { /* (3) */
- if ( MapP->ID || MapP->SysPort || MapP->Flags ) {
- rio_dprintk (RIO_DEBUG_TABLE, "%s pretending to be empty but isn't\n",MapP->Name);
+ rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(3)\n");
+ if (!MapP->RtaUniqueNum && !MapP->HostUniqueNum) { /* (3) */
+ if (MapP->ID || MapP->SysPort || MapP->Flags) {
+ rio_dprintk(RIO_DEBUG_TABLE, "%s pretending to be empty but isn't\n", MapP->Name);
p->RIOError.Error = TABLE_ENTRY_ISNT_PROPERLY_NULL;
p->RIOError.Entry = Entry;
return -ENXIO;
}
- rio_dprintk (RIO_DEBUG_TABLE, "!RIO: Daemon: test (3) passes\n");
+ rio_dprintk(RIO_DEBUG_TABLE, "!RIO: Daemon: test (3) passes\n");
continue;
}
- rio_dprintk (RIO_DEBUG_TABLE, "RIONewTable: entering(4)\n");
- for ( Host=0; Host<p->RIONumHosts; Host++ ) { /* (4) */
- if ( p->RIOHosts[Host].UniqueNum==MapP->HostUniqueNum ) {
+ rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(4)\n");
+ for (Host = 0; Host < p->RIONumHosts; Host++) { /* (4) */
+ if (p->RIOHosts[Host].UniqueNum == MapP->HostUniqueNum) {
HostP = &p->RIOHosts[Host];
/*
- ** having done the lookup, we don't really want to do
- ** it again, so hang the host number in a safe place
- */
+ ** having done the lookup, we don't really want to do
+ ** it again, so hang the host number in a safe place
+ */
MapP->Topology[0].Unit = Host;
break;
}
}
- if ( Host >= p->RIONumHosts ) {
- rio_dprintk (RIO_DEBUG_TABLE, "RTA %s has unknown host unique number 0x%x\n",
- MapP->Name, MapP->HostUniqueNum);
+ if (Host >= p->RIONumHosts) {
+ rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has unknown host unique number 0x%x\n", MapP->Name, MapP->HostUniqueNum);
MapP->HostUniqueNum = 0;
- /* MapP->RtaUniqueNum = 0; */
- /* MapP->ID = 0; */
- /* MapP->Flags = 0; */
- /* MapP->SysPort = 0; */
- /* MapP->Name[0] = 0; */
+ /* MapP->RtaUniqueNum = 0; */
+ /* MapP->ID = 0; */
+ /* MapP->Flags = 0; */
+ /* MapP->SysPort = 0; */
+ /* MapP->Name[0] = 0; */
continue;
}
- rio_dprintk (RIO_DEBUG_TABLE, "RIONewTable: entering(5)\n");
- if ( MapP->RtaUniqueNum ) { /* (5) */
- if ( !MapP->ID ) {
- rio_dprintk (RIO_DEBUG_TABLE, "RIO: RTA %s has been allocated an ID of zero!\n",
- MapP->Name);
- p->RIOError.Error = ZERO_RTA_ID;
+ rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(5)\n");
+ if (MapP->RtaUniqueNum) { /* (5) */
+ if (!MapP->ID) {
+ rio_dprintk(RIO_DEBUG_TABLE, "RIO: RTA %s has been allocated an ID of zero!\n", MapP->Name);
+ p->RIOError.Error = ZERO_RTA_ID;
p->RIOError.Entry = Entry;
return -ENXIO;
}
- if ( MapP->ID > MAX_RUP ) {
- rio_dprintk (RIO_DEBUG_TABLE, "RIO: RTA %s has been allocated an invalid ID %d\n",
- MapP->Name, MapP->ID);
+ if (MapP->ID > MAX_RUP) {
+ rio_dprintk(RIO_DEBUG_TABLE, "RIO: RTA %s has been allocated an invalid ID %d\n", MapP->Name, MapP->ID);
p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE;
p->RIOError.Entry = Entry;
return -ENXIO;
}
- for ( SubEnt=0; SubEnt<Entry; SubEnt++ ) {
- if ( MapP->HostUniqueNum ==
- p->RIOConnectTable[SubEnt].HostUniqueNum &&
- MapP->ID == p->RIOConnectTable[SubEnt].ID ) {
- rio_dprintk (RIO_DEBUG_TABLE, "Dupl. ID number allocated to RTA %s and RTA %s\n",
- MapP->Name, p->RIOConnectTable[SubEnt].Name);
+ for (SubEnt = 0; SubEnt < Entry; SubEnt++) {
+ if (MapP->HostUniqueNum == p->RIOConnectTable[SubEnt].HostUniqueNum && MapP->ID == p->RIOConnectTable[SubEnt].ID) {
+ rio_dprintk(RIO_DEBUG_TABLE, "Dupl. ID number allocated to RTA %s and RTA %s\n", MapP->Name, p->RIOConnectTable[SubEnt].Name);
p->RIOError.Error = DUPLICATED_RTA_ID;
p->RIOError.Entry = Entry;
p->RIOError.Other = SubEnt;
return -ENXIO;
}
/*
- ** If the RtaUniqueNum is the same, it may be looking at both
- ** entries for a 16 port RTA, so check the ids
- */
- if ((MapP->RtaUniqueNum ==
- p->RIOConnectTable[SubEnt].RtaUniqueNum)
- && (MapP->ID2 != p->RIOConnectTable[SubEnt].ID)) {
- rio_dprintk (RIO_DEBUG_TABLE, "RTA %s has duplicate unique number\n",MapP->Name);
- rio_dprintk (RIO_DEBUG_TABLE, "RTA %s has duplicate unique number\n",
- p->RIOConnectTable[SubEnt].Name);
+ ** If the RtaUniqueNum is the same, it may be looking at both
+ ** entries for a 16 port RTA, so check the ids
+ */
+ if ((MapP->RtaUniqueNum == p->RIOConnectTable[SubEnt].RtaUniqueNum)
+ && (MapP->ID2 != p->RIOConnectTable[SubEnt].ID)) {
+ rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has duplicate unique number\n", MapP->Name);
+ rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has duplicate unique number\n", p->RIOConnectTable[SubEnt].Name);
p->RIOError.Error = DUPLICATE_UNIQUE_NUMBER;
p->RIOError.Entry = Entry;
p->RIOError.Other = SubEnt;
return -ENXIO;
}
}
- rio_dprintk (RIO_DEBUG_TABLE, "RIONewTable: entering(7a)\n");
+ rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(7a)\n");
/* (7a) */
- if ((MapP->SysPort != NO_PORT)&&(MapP->SysPort % PORTS_PER_RTA)) {
- rio_dprintk (RIO_DEBUG_TABLE, "TTY Port number %d-RTA %s is not a multiple of %d!\n",
- (int)MapP->SysPort,MapP->Name, PORTS_PER_RTA);
+ if ((MapP->SysPort != NO_PORT) && (MapP->SysPort % PORTS_PER_RTA)) {
+ rio_dprintk(RIO_DEBUG_TABLE, "TTY Port number %d-RTA %s is not a multiple of %d!\n", (int) MapP->SysPort, MapP->Name, PORTS_PER_RTA);
p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE;
p->RIOError.Entry = Entry;
return -ENXIO;
}
- rio_dprintk (RIO_DEBUG_TABLE, "RIONewTable: entering(7b)\n");
+ rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(7b)\n");
/* (7b) */
- if ((MapP->SysPort != NO_PORT)&&(MapP->SysPort >= RIO_PORTS)) {
- rio_dprintk (RIO_DEBUG_TABLE, "TTY Port number %d for RTA %s is too big\n",
- (int)MapP->SysPort, MapP->Name);
+ if ((MapP->SysPort != NO_PORT) && (MapP->SysPort >= RIO_PORTS)) {
+ rio_dprintk(RIO_DEBUG_TABLE, "TTY Port number %d for RTA %s is too big\n", (int) MapP->SysPort, MapP->Name);
p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE;
p->RIOError.Entry = Entry;
return -ENXIO;
}
- for ( SubEnt=0; SubEnt<Entry; SubEnt++ ) {
- if ( p->RIOConnectTable[SubEnt].Flags & RTA16_SECOND_SLOT )
- continue;
- if ( p->RIOConnectTable[SubEnt].RtaUniqueNum ) {
- rio_dprintk (RIO_DEBUG_TABLE, "RIONewTable: entering(8)\n");
+ for (SubEnt = 0; SubEnt < Entry; SubEnt++) {
+ if (p->RIOConnectTable[SubEnt].Flags & RTA16_SECOND_SLOT)
+ continue;
+ if (p->RIOConnectTable[SubEnt].RtaUniqueNum) {
+ rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(8)\n");
/* (8) */
- if ( (MapP->SysPort != NO_PORT) && (MapP->SysPort ==
- p->RIOConnectTable[SubEnt].SysPort) ) {
- rio_dprintk (RIO_DEBUG_TABLE, "RTA %s:same TTY port # as RTA %s (%d)\n",
- MapP->Name, p->RIOConnectTable[SubEnt].Name,
- (int)MapP->SysPort);
+ if ((MapP->SysPort != NO_PORT) && (MapP->SysPort == p->RIOConnectTable[SubEnt].SysPort)) {
+ rio_dprintk(RIO_DEBUG_TABLE, "RTA %s:same TTY port # as RTA %s (%d)\n", MapP->Name, p->RIOConnectTable[SubEnt].Name, (int) MapP->SysPort);
p->RIOError.Error = TTY_NUMBER_IN_USE;
p->RIOError.Entry = Entry;
p->RIOError.Other = SubEnt;
return -ENXIO;
}
- rio_dprintk (RIO_DEBUG_TABLE, "RIONewTable: entering(9)\n");
- if (strcmp(MapP->Name,
- p->RIOConnectTable[SubEnt].Name)==0 && !(MapP->Flags & RTA16_SECOND_SLOT)) { /* (9) */
- rio_dprintk (RIO_DEBUG_TABLE, "RTA name %s used twice\n", MapP->Name);
+ rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(9)\n");
+ if (strcmp(MapP->Name, p->RIOConnectTable[SubEnt].Name) == 0 && !(MapP->Flags & RTA16_SECOND_SLOT)) { /* (9) */
+ rio_dprintk(RIO_DEBUG_TABLE, "RTA name %s used twice\n", MapP->Name);
p->RIOError.Error = NAME_USED_TWICE;
p->RIOError.Entry = Entry;
p->RIOError.Other = SubEnt;
@@ -287,19 +272,16 @@
}
}
}
- }
- else { /* (6) */
- rio_dprintk (RIO_DEBUG_TABLE, "RIONewTable: entering(6)\n");
- if ( MapP->ID ) {
- rio_dprintk (RIO_DEBUG_TABLE, "RIO:HOST %s has been allocated ID that isn't zero!\n",
- MapP->Name);
+ } else { /* (6) */
+ rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(6)\n");
+ if (MapP->ID) {
+ rio_dprintk(RIO_DEBUG_TABLE, "RIO:HOST %s has been allocated ID that isn't zero!\n", MapP->Name);
p->RIOError.Error = HOST_ID_NOT_ZERO;
p->RIOError.Entry = Entry;
return -ENXIO;
}
- if ( MapP->SysPort != NO_PORT ) {
- rio_dprintk (RIO_DEBUG_TABLE, "RIO: HOST %s has been allocated port numbers!\n",
- MapP->Name);
+ if (MapP->SysPort != NO_PORT) {
+ rio_dprintk(RIO_DEBUG_TABLE, "RIO: HOST %s has been allocated port numbers!\n", MapP->Name);
p->RIOError.Error = HOST_SYSPORT_BAD;
p->RIOError.Entry = Entry;
return -ENXIO;
@@ -308,106 +290,101 @@
}
/*
- ** wow! if we get here then it's a goody!
- */
+ ** wow! if we get here then it's a goody!
+ */
/*
- ** Zero the (old) entries for each host...
- */
- for ( Host=0; Host<RIO_HOSTS; Host++ ) {
- for ( Entry=0; Entry<MAX_RUP; Entry++ ) {
- bzero((caddr_t)&p->RIOHosts[Host].Mapping[Entry],
- sizeof(struct Map));
+ ** Zero the (old) entries for each host...
+ */
+ for (Host = 0; Host < RIO_HOSTS; Host++) {
+ for (Entry = 0; Entry < MAX_RUP; Entry++) {
+ bzero((caddr_t) & p->RIOHosts[Host].Mapping[Entry], sizeof(struct Map));
}
- bzero((caddr_t)&p->RIOHosts[Host].Name[0],
- sizeof(p->RIOHosts[Host].Name) );
+ bzero((caddr_t) & p->RIOHosts[Host].Name[0], sizeof(p->RIOHosts[Host].Name));
}
/*
- ** Copy in the new table entries
- */
- for ( Entry=0; Entry< TOTAL_MAP_ENTRIES; Entry++ ) {
- rio_dprintk (RIO_DEBUG_TABLE, "RIONewTable: Copy table for Host entry %d\n", Entry);
+ ** Copy in the new table entries
+ */
+ for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) {
+ rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: Copy table for Host entry %d\n", Entry);
MapP = &p->RIOConnectTable[Entry];
/*
- ** Now, if it is an empty slot ignore it!
- */
- if ( MapP->HostUniqueNum==0 )
+ ** Now, if it is an empty slot ignore it!
+ */
+ if (MapP->HostUniqueNum == 0)
continue;
/*
- ** we saved the host number earlier, so grab it back
- */
+ ** we saved the host number earlier, so grab it back
+ */
HostP = &p->RIOHosts[MapP->Topology[0].Unit];
/*
- ** If it is a host, then we only need to fill in the name field.
- */
- if ( MapP->ID==0 ) {
- rio_dprintk (RIO_DEBUG_TABLE, "Host entry found. Name %s\n", MapP->Name);
- bcopy(MapP->Name,HostP->Name,MAX_NAME_LEN);
+ ** If it is a host, then we only need to fill in the name field.
+ */
+ if (MapP->ID == 0) {
+ rio_dprintk(RIO_DEBUG_TABLE, "Host entry found. Name %s\n", MapP->Name);
+ bcopy(MapP->Name, HostP->Name, MAX_NAME_LEN);
continue;
}
/*
- ** Its an RTA entry, so fill in the host mapping entries for it
- ** and the port mapping entries. Notice that entry zero is for
- ** ID one.
- */
- HostMapP = &HostP->Mapping[MapP->ID-1];
+ ** Its an RTA entry, so fill in the host mapping entries for it
+ ** and the port mapping entries. Notice that entry zero is for
+ ** ID one.
+ */
+ HostMapP = &HostP->Mapping[MapP->ID - 1];
if (MapP->Flags & SLOT_IN_USE) {
- rio_dprintk (RIO_DEBUG_TABLE, "Rta entry found. Name %s\n", MapP->Name);
+ rio_dprintk(RIO_DEBUG_TABLE, "Rta entry found. Name %s\n", MapP->Name);
/*
- ** structure assign, then sort out the bits we shouldn't have done
- */
+ ** structure assign, then sort out the bits we shouldn't have done
+ */
*HostMapP = *MapP;
HostMapP->Flags = SLOT_IN_USE;
if (MapP->Flags & RTA16_SECOND_SLOT)
HostMapP->Flags |= RTA16_SECOND_SLOT;
- RIOReMapPorts(p, HostP, HostMapP );
- }
- else {
- rio_dprintk (RIO_DEBUG_TABLE, "TENTATIVE Rta entry found. Name %s\n", MapP->Name);
+ RIOReMapPorts(p, HostP, HostMapP);
+ } else {
+ rio_dprintk(RIO_DEBUG_TABLE, "TENTATIVE Rta entry found. Name %s\n", MapP->Name);
}
}
- for ( Entry=0; Entry< TOTAL_MAP_ENTRIES; Entry++ ) {
+ for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) {
p->RIOSavedTable[Entry] = p->RIOConnectTable[Entry];
}
- for ( Host=0; Host<p->RIONumHosts; Host++ ) {
- for ( SubEnt=0; SubEnt<LINKS_PER_UNIT; SubEnt++ ) {
+ for (Host = 0; Host < p->RIONumHosts; Host++) {
+ for (SubEnt = 0; SubEnt < LINKS_PER_UNIT; SubEnt++) {
p->RIOHosts[Host].Topology[SubEnt].Unit = ROUTE_DISCONNECT;
p->RIOHosts[Host].Topology[SubEnt].Link = NO_LINK;
}
- for ( Entry=0; Entry<MAX_RUP; Entry++ ) {
- for ( SubEnt=0; SubEnt<LINKS_PER_UNIT; SubEnt++ ) {
- p->RIOHosts[Host].Mapping[Entry].Topology[SubEnt].Unit =
- ROUTE_DISCONNECT;
- p->RIOHosts[Host].Mapping[Entry].Topology[SubEnt].Link =
- NO_LINK;
+ for (Entry = 0; Entry < MAX_RUP; Entry++) {
+ for (SubEnt = 0; SubEnt < LINKS_PER_UNIT; SubEnt++) {
+ p->RIOHosts[Host].Mapping[Entry].Topology[SubEnt].Unit = ROUTE_DISCONNECT;
+ p->RIOHosts[Host].Mapping[Entry].Topology[SubEnt].Link = NO_LINK;
}
}
- if ( !p->RIOHosts[Host].Name[0] ) {
- bcopy("HOST 1",p->RIOHosts[Host].Name,7);
+ if (!p->RIOHosts[Host].Name[0]) {
+ bcopy("HOST 1", p->RIOHosts[Host].Name, 7);
p->RIOHosts[Host].Name[5] += Host;
}
/*
- ** Check that default name assigned is unique.
- */
+ ** Check that default name assigned is unique.
+ */
Host1 = Host;
NameIsUnique = 0;
while (!NameIsUnique) {
NameIsUnique = 1;
- for ( Host2=0; Host2<p->RIONumHosts; Host2++ ) {
+ for (Host2 = 0; Host2 < p->RIONumHosts; Host2++) {
if (Host2 == Host)
continue;
if (strcmp(p->RIOHosts[Host].Name, p->RIOHosts[Host2].Name)
- == 0) {
+ == 0) {
NameIsUnique = 0;
Host1++;
if (Host1 >= p->RIONumHosts)
@@ -417,15 +394,14 @@
}
}
/*
- ** Rename host if name already used.
- */
- if (Host1 != Host)
- {
- rio_dprintk (RIO_DEBUG_TABLE, "Default name %s already used\n", p->RIOHosts[Host].Name);
- bcopy("HOST 1",p->RIOHosts[Host].Name,7);
+ ** Rename host if name already used.
+ */
+ if (Host1 != Host) {
+ rio_dprintk(RIO_DEBUG_TABLE, "Default name %s already used\n", p->RIOHosts[Host].Name);
+ bcopy("HOST 1", p->RIOHosts[Host].Name, 7);
p->RIOHosts[Host].Name[5] += Host1;
}
- rio_dprintk (RIO_DEBUG_TABLE, "Assigning default name %s\n", p->RIOHosts[Host].Name);
+ rio_dprintk(RIO_DEBUG_TABLE, "Assigning default name %s\n", p->RIOHosts[Host].Name);
}
return 0;
}
@@ -434,9 +410,8 @@
** User process needs the config table - build it from first
** principles.
*/
-int
-RIOApel(p)
-struct rio_info * p;
+int RIOApel(p)
+struct rio_info *p;
{
int Host;
int link;
@@ -446,35 +421,34 @@
struct Host *HostP;
long oldspl;
- disable(oldspl); /* strange but true! */
-
- rio_dprintk (RIO_DEBUG_TABLE, "Generating a table to return to config.rio\n");
+ disable(oldspl); /* strange but true! */
- bzero((caddr_t)&p->RIOConnectTable[0],
- sizeof(struct Map) * TOTAL_MAP_ENTRIES );
+ rio_dprintk(RIO_DEBUG_TABLE, "Generating a table to return to config.rio\n");
- for ( Host=0; Host<RIO_HOSTS; Host++ ) {
- rio_dprintk (RIO_DEBUG_TABLE, "Processing host %d\n", Host);
+ bzero((caddr_t) & p->RIOConnectTable[0], sizeof(struct Map) * TOTAL_MAP_ENTRIES);
+
+ for (Host = 0; Host < RIO_HOSTS; Host++) {
+ rio_dprintk(RIO_DEBUG_TABLE, "Processing host %d\n", Host);
HostP = &p->RIOHosts[Host];
MapP = &p->RIOConnectTable[Next++];
MapP->HostUniqueNum = HostP->UniqueNum;
- if ( (HostP->Flags & RUN_STATE) != RC_RUNNING )
+ if ((HostP->Flags & RUN_STATE) != RC_RUNNING)
continue;
MapP->RtaUniqueNum = 0;
MapP->ID = 0;
MapP->Flags = SLOT_IN_USE;
MapP->SysPort = NO_PORT;
- for ( link=0; link<LINKS_PER_UNIT; link++ )
+ for (link = 0; link < LINKS_PER_UNIT; link++)
MapP->Topology[link] = HostP->Topology[link];
- bcopy(HostP->Name,MapP->Name,MAX_NAME_LEN);
- for ( Rup=0; Rup<MAX_RUP; Rup++ ) {
- if ( HostP->Mapping[Rup].Flags & (SLOT_IN_USE|SLOT_TENTATIVE) ) {
+ bcopy(HostP->Name, MapP->Name, MAX_NAME_LEN);
+ for (Rup = 0; Rup < MAX_RUP; Rup++) {
+ if (HostP->Mapping[Rup].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) {
p->RIOConnectTable[Next] = HostP->Mapping[Rup];
- if ( HostP->Mapping[Rup].Flags & SLOT_IN_USE)
+ if (HostP->Mapping[Rup].Flags & SLOT_IN_USE)
p->RIOConnectTable[Next].Flags |= SLOT_IN_USE;
- if ( HostP->Mapping[Rup].Flags & SLOT_TENTATIVE)
+ if (HostP->Mapping[Rup].Flags & SLOT_TENTATIVE)
p->RIOConnectTable[Next].Flags |= SLOT_TENTATIVE;
- if ( HostP->Mapping[Rup].Flags & RTA16_SECOND_SLOT )
+ if (HostP->Mapping[Rup].Flags & RTA16_SECOND_SLOT)
p->RIOConnectTable[Next].Flags |= RTA16_SECOND_SLOT;
Next++;
}
@@ -489,8 +463,7 @@
** if the entry is suitably inactive, then we can gob on it and remove
** it from the table.
*/
-int
-RIODeleteRta(p, MapP)
+int RIODeleteRta(p, MapP)
struct rio_info *p;
struct Map *MapP;
{
@@ -502,110 +475,98 @@
int work_done = 0;
unsigned long lock_flags, sem_flags;
- rio_dprintk (RIO_DEBUG_TABLE, "Delete entry on host %x, rta %x\n",
- MapP->HostUniqueNum, MapP->RtaUniqueNum);
+ rio_dprintk(RIO_DEBUG_TABLE, "Delete entry on host %x, rta %x\n", MapP->HostUniqueNum, MapP->RtaUniqueNum);
- for ( host=0; host < p->RIONumHosts; host++ ) {
+ for (host = 0; host < p->RIONumHosts; host++) {
HostP = &p->RIOHosts[host];
- rio_spin_lock_irqsave( &HostP->HostLock, lock_flags );
+ rio_spin_lock_irqsave(&HostP->HostLock, lock_flags);
- if ( (HostP->Flags & RUN_STATE) != RC_RUNNING ) {
+ if ((HostP->Flags & RUN_STATE) != RC_RUNNING) {
rio_spin_unlock_irqrestore(&HostP->HostLock, lock_flags);
continue;
}
- for ( entry=0; entry<MAX_RUP; entry++ ) {
- if ( MapP->RtaUniqueNum == HostP->Mapping[entry].RtaUniqueNum ) {
+ for (entry = 0; entry < MAX_RUP; entry++) {
+ if (MapP->RtaUniqueNum == HostP->Mapping[entry].RtaUniqueNum) {
HostMapP = &HostP->Mapping[entry];
- rio_dprintk (RIO_DEBUG_TABLE, "Found entry offset %d on host %s\n",
- entry, HostP->Name);
+ rio_dprintk(RIO_DEBUG_TABLE, "Found entry offset %d on host %s\n", entry, HostP->Name);
/*
- ** Check all four links of the unit are disconnected
- */
- for ( link=0; link< LINKS_PER_UNIT; link++ ) {
- if ( HostMapP->Topology[link].Unit != ROUTE_DISCONNECT ) {
- rio_dprintk (RIO_DEBUG_TABLE, "Entry is in use and cannot be deleted!\n");
+ ** Check all four links of the unit are disconnected
+ */
+ for (link = 0; link < LINKS_PER_UNIT; link++) {
+ if (HostMapP->Topology[link].Unit != ROUTE_DISCONNECT) {
+ rio_dprintk(RIO_DEBUG_TABLE, "Entry is in use and cannot be deleted!\n");
p->RIOError.Error = UNIT_IS_IN_USE;
- rio_spin_unlock_irqrestore( &HostP->HostLock, lock_flags);
+ rio_spin_unlock_irqrestore(&HostP->HostLock, lock_flags);
return -EBUSY;
}
}
/*
- ** Slot has been allocated, BUT not booted/routed/
- ** connected/selected or anything else-ed
- */
+ ** Slot has been allocated, BUT not booted/routed/
+ ** connected/selected or anything else-ed
+ */
SysPort = HostMapP->SysPort;
- if ( SysPort != NO_PORT ) {
- for (port=SysPort; port < SysPort+PORTS_PER_RTA; port++) {
+ if (SysPort != NO_PORT) {
+ for (port = SysPort; port < SysPort + PORTS_PER_RTA; port++) {
PortP = p->RIOPortp[port];
- rio_dprintk (RIO_DEBUG_TABLE, "Unmap port\n");
+ rio_dprintk(RIO_DEBUG_TABLE, "Unmap port\n");
- rio_spin_lock_irqsave( &PortP->portSem, sem_flags );
+ rio_spin_lock_irqsave(&PortP->portSem, sem_flags);
PortP->Mapped = 0;
- if ( PortP->State & (RIO_MOPEN|RIO_LOPEN) ) {
+ if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) {
- rio_dprintk (RIO_DEBUG_TABLE, "Gob on port\n");
+ rio_dprintk(RIO_DEBUG_TABLE, "Gob on port\n");
PortP->TxBufferIn = PortP->TxBufferOut = 0;
/* What should I do
- wakeup( &PortP->TxBufferIn );
- wakeup( &PortP->TxBufferOut);
- */
+ wakeup( &PortP->TxBufferIn );
+ wakeup( &PortP->TxBufferOut);
+ */
PortP->InUse = NOT_INUSE;
/* What should I do
- wakeup( &PortP->InUse );
- signal(PortP->TtyP->t_pgrp,SIGKILL);
- ttyflush(PortP->TtyP,(FREAD|FWRITE));
- */
+ wakeup( &PortP->InUse );
+ signal(PortP->TtyP->t_pgrp,SIGKILL);
+ ttyflush(PortP->TtyP,(FREAD|FWRITE));
+ */
PortP->State |= RIO_CLOSING | RIO_DELETED;
}
/*
- ** For the second slot of a 16 port RTA, the
- ** driver needs to reset the changes made to
- ** the phb to port mappings in RIORouteRup.
- */
+ ** For the second slot of a 16 port RTA, the
+ ** driver needs to reset the changes made to
+ ** the phb to port mappings in RIORouteRup.
+ */
if (PortP->SecondBlock) {
ushort dest_unit = HostMapP->ID;
ushort dest_port = port - SysPort;
- WORD *TxPktP;
- PKT *Pkt;
+ WORD *TxPktP;
+ PKT *Pkt;
- for (TxPktP = PortP->TxStart;
- TxPktP <= PortP->TxEnd; TxPktP++) {
+ for (TxPktP = PortP->TxStart; TxPktP <= PortP->TxEnd; TxPktP++) {
/*
- ** *TxPktP is the pointer to the
- ** transmit packet on the host card.
- ** This needs to be translated into
- ** a 32 bit pointer so it can be
- ** accessed from the driver.
- */
- Pkt = (PKT *) RIO_PTR(HostP->Caddr,
- RWORD(*TxPktP));
- rio_dprintk (RIO_DEBUG_TABLE,
- "Tx packet (%x) destination: Old %x:%x New %x:%x\n",
- *TxPktP, Pkt->dest_unit,
- Pkt->dest_port, dest_unit, dest_port);
+ ** *TxPktP is the pointer to the
+ ** transmit packet on the host card.
+ ** This needs to be translated into
+ ** a 32 bit pointer so it can be
+ ** accessed from the driver.
+ */
+ Pkt = (PKT *) RIO_PTR(HostP->Caddr, RWORD(*TxPktP));
+ rio_dprintk(RIO_DEBUG_TABLE, "Tx packet (%x) destination: Old %x:%x New %x:%x\n", *TxPktP, Pkt->dest_unit, Pkt->dest_port, dest_unit, dest_port);
WWORD(Pkt->dest_unit, dest_unit);
WWORD(Pkt->dest_port, dest_port);
}
- rio_dprintk (RIO_DEBUG_TABLE,
- "Port %d phb destination: Old %x:%x New %x:%x\n",
- port, PortP->PhbP->destination & 0xff,
- (PortP->PhbP->destination >> 8) & 0xff,
- dest_unit, dest_port);
- WWORD(PortP->PhbP->destination,
- dest_unit + (dest_port << 8));
+ rio_dprintk(RIO_DEBUG_TABLE, "Port %d phb destination: Old %x:%x New %x:%x\n", port, PortP->PhbP->destination & 0xff, (PortP->PhbP->destination >> 8) & 0xff, dest_unit, dest_port);
+ WWORD(PortP->PhbP->destination, dest_unit + (dest_port << 8));
}
rio_spin_unlock_irqrestore(&PortP->portSem, sem_flags);
}
}
- rio_dprintk (RIO_DEBUG_TABLE, "Entry nulled.\n");
- bzero((char *)HostMapP,sizeof(struct Map));
+ rio_dprintk(RIO_DEBUG_TABLE, "Entry nulled.\n");
+ bzero((char *) HostMapP, sizeof(struct Map));
work_done++;
}
}
@@ -613,203 +574,178 @@
}
/* XXXXX lock me up */
- for ( entry=0; entry< TOTAL_MAP_ENTRIES; entry++ ) {
- if ( p->RIOSavedTable[entry].RtaUniqueNum == MapP->RtaUniqueNum ) {
- bzero((char *)&p->RIOSavedTable[entry],sizeof(struct Map));
+ for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) {
+ if (p->RIOSavedTable[entry].RtaUniqueNum == MapP->RtaUniqueNum) {
+ bzero((char *) &p->RIOSavedTable[entry], sizeof(struct Map));
work_done++;
}
- if ( p->RIOConnectTable[entry].RtaUniqueNum == MapP->RtaUniqueNum ) {
- bzero((char *)&p->RIOConnectTable[entry],sizeof(struct Map));
+ if (p->RIOConnectTable[entry].RtaUniqueNum == MapP->RtaUniqueNum) {
+ bzero((char *) &p->RIOConnectTable[entry], sizeof(struct Map));
work_done++;
}
}
- if ( work_done )
+ if (work_done)
return 0;
- rio_dprintk (RIO_DEBUG_TABLE, "Couldn't find entry to be deleted\n");
+ rio_dprintk(RIO_DEBUG_TABLE, "Couldn't find entry to be deleted\n");
p->RIOError.Error = COULDNT_FIND_ENTRY;
return -ENXIO;
}
-int RIOAssignRta( struct rio_info *p, struct Map *MapP )
+int RIOAssignRta(struct rio_info *p, struct Map *MapP)
{
- int host;
- struct Map *HostMapP;
- char *sptr;
- int link;
+ int host;
+ struct Map *HostMapP;
+ char *sptr;
+ int link;
- rio_dprintk (RIO_DEBUG_TABLE, "Assign entry on host %x, rta %x, ID %d, Sysport %d\n",
- MapP->HostUniqueNum,MapP->RtaUniqueNum,
- MapP->ID, (int)MapP->SysPort);
+ rio_dprintk(RIO_DEBUG_TABLE, "Assign entry on host %x, rta %x, ID %d, Sysport %d\n", MapP->HostUniqueNum, MapP->RtaUniqueNum, MapP->ID, (int) MapP->SysPort);
- if ((MapP->ID != (ushort)-1) &&
- ((int)MapP->ID < (int)1 || (int)MapP->ID > MAX_RUP ))
- {
- rio_dprintk (RIO_DEBUG_TABLE, "Bad ID in map entry!\n");
- p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
- if (MapP->RtaUniqueNum == 0)
- {
- rio_dprintk (RIO_DEBUG_TABLE, "Rta Unique number zero!\n");
- p->RIOError.Error = RTA_UNIQUE_NUMBER_ZERO;
- return -EINVAL;
- }
- if ( (MapP->SysPort != NO_PORT) && (MapP->SysPort % PORTS_PER_RTA) )
- {
- rio_dprintk (RIO_DEBUG_TABLE, "Port %d not multiple of %d!\n",(int)MapP->SysPort,PORTS_PER_RTA);
- p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
- if ( (MapP->SysPort != NO_PORT) && (MapP->SysPort >= RIO_PORTS) )
- {
- rio_dprintk (RIO_DEBUG_TABLE, "Port %d not valid!\n",(int)MapP->SysPort);
- p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
-
- /*
- ** Copy the name across to the map entry.
- */
- MapP->Name[MAX_NAME_LEN-1] = '\0';
- sptr = MapP->Name;
- while ( *sptr )
- {
- if ( *sptr<' ' || *sptr>'~' )
- {
- rio_dprintk (RIO_DEBUG_TABLE, "Name entry contains non-printing characters!\n");
- p->RIOError.Error = BAD_CHARACTER_IN_NAME;
- return -EINVAL;
- }
- sptr++;
- }
-
- for ( host=0; host < p->RIONumHosts; host++ )
- {
- if ( MapP->HostUniqueNum == p->RIOHosts[host].UniqueNum )
- {
- if ( (p->RIOHosts[host].Flags & RUN_STATE) != RC_RUNNING )
- {
- p->RIOError.Error = HOST_NOT_RUNNING;
- return -ENXIO;
- }
-
- /*
- ** Now we have a host we need to allocate an ID
- ** if the entry does not already have one.
- */
- if (MapP->ID == (ushort)-1)
- {
- int nNewID;
-
- rio_dprintk (RIO_DEBUG_TABLE, "Attempting to get a new ID for rta \"%s\"\n",
- MapP->Name);
- /*
- ** The idea here is to allow RTA's to be assigned
- ** before they actually appear on the network.
- ** This allows the addition of RTA's without having
- ** to plug them in.
- ** What we do is:
- ** - Find a free ID and allocate it to the RTA.
- ** - If this map entry is the second half of a
- ** 16 port entry then find the other half and
- ** make sure the 2 cross reference each other.
- */
- if (RIOFindFreeID(p, &p->RIOHosts[host], &nNewID, NULL) != 0)
- {
- p->RIOError.Error = COULDNT_FIND_ENTRY;
- return -EBUSY;
- }
- MapP->ID = (ushort)nNewID + 1;
- rio_dprintk (RIO_DEBUG_TABLE, "Allocated ID %d for this new RTA.\n", MapP->ID);
- HostMapP = &p->RIOHosts[host].Mapping[nNewID];
- HostMapP->RtaUniqueNum = MapP->RtaUniqueNum;
- HostMapP->HostUniqueNum = MapP->HostUniqueNum;
- HostMapP->ID = MapP->ID;
- for (link = 0; link < LINKS_PER_UNIT; link++)
- {
- HostMapP->Topology[link].Unit = ROUTE_DISCONNECT;
- HostMapP->Topology[link].Link = NO_LINK;
- }
- if (MapP->Flags & RTA16_SECOND_SLOT)
- {
- int unit;
-
- for (unit = 0; unit < MAX_RUP; unit++)
- if (p->RIOHosts[host].Mapping[unit].RtaUniqueNum ==
- MapP->RtaUniqueNum)
- break;
- if (unit == MAX_RUP)
- {
- p->RIOError.Error = COULDNT_FIND_ENTRY;
- return -EBUSY;
- }
- HostMapP->Flags |= RTA16_SECOND_SLOT;
- HostMapP->ID2 = MapP->ID2 = p->RIOHosts[host].Mapping[unit].ID;
- p->RIOHosts[host].Mapping[unit].ID2 = MapP->ID;
- rio_dprintk (RIO_DEBUG_TABLE, "Cross referenced id %d to ID %d.\n",
- MapP->ID,
- p->RIOHosts[host].Mapping[unit].ID);
- }
- }
-
- HostMapP = &p->RIOHosts[host].Mapping[MapP->ID-1];
-
- if ( HostMapP->Flags & SLOT_IN_USE )
- {
- rio_dprintk (RIO_DEBUG_TABLE, "Map table slot for ID %d is already in use.\n", MapP->ID);
- p->RIOError.Error = ID_ALREADY_IN_USE;
- return -EBUSY;
- }
-
- /*
- ** Assign the sys ports and the name, and mark the slot as
- ** being in use.
- */
- HostMapP->SysPort = MapP->SysPort;
- if ((MapP->Flags & RTA16_SECOND_SLOT) == 0)
- CCOPY( MapP->Name, HostMapP->Name, MAX_NAME_LEN );
- HostMapP->Flags = SLOT_IN_USE | RTA_BOOTED;
-#ifdef NEED_TO_FIX
- RIO_SV_BROADCAST(p->RIOHosts[host].svFlags[MapP->ID-1]);
-#endif
- if (MapP->Flags & RTA16_SECOND_SLOT)
- HostMapP->Flags |= RTA16_SECOND_SLOT;
-
- RIOReMapPorts( p, &p->RIOHosts[host], HostMapP );
- /*
- ** Adjust 2nd block of 8 phbs
- */
- if (MapP->Flags & RTA16_SECOND_SLOT)
- RIOFixPhbs(p, &p->RIOHosts[host], HostMapP->ID - 1);
-
- if ( HostMapP->SysPort != NO_PORT )
- {
- if ( HostMapP->SysPort < p->RIOFirstPortsBooted )
- p->RIOFirstPortsBooted = HostMapP->SysPort;
- if ( HostMapP->SysPort > p->RIOLastPortsBooted )
- p->RIOLastPortsBooted = HostMapP->SysPort;
- }
- if (MapP->Flags & RTA16_SECOND_SLOT)
- rio_dprintk (RIO_DEBUG_TABLE, "Second map of RTA %s added to configuration\n",
- p->RIOHosts[host].Mapping[MapP->ID2 - 1].Name);
- else
- rio_dprintk (RIO_DEBUG_TABLE, "RTA %s added to configuration\n", MapP->Name);
- return 0;
+ if ((MapP->ID != (ushort) - 1) && ((int) MapP->ID < (int) 1 || (int) MapP->ID > MAX_RUP)) {
+ rio_dprintk(RIO_DEBUG_TABLE, "Bad ID in map entry!\n");
+ p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE;
+ return -EINVAL;
}
- }
- p->RIOError.Error = UNKNOWN_HOST_NUMBER;
- rio_dprintk (RIO_DEBUG_TABLE, "Unknown host %x\n", MapP->HostUniqueNum);
- return -ENXIO;
+ if (MapP->RtaUniqueNum == 0) {
+ rio_dprintk(RIO_DEBUG_TABLE, "Rta Unique number zero!\n");
+ p->RIOError.Error = RTA_UNIQUE_NUMBER_ZERO;
+ return -EINVAL;
+ }
+ if ((MapP->SysPort != NO_PORT) && (MapP->SysPort % PORTS_PER_RTA)) {
+ rio_dprintk(RIO_DEBUG_TABLE, "Port %d not multiple of %d!\n", (int) MapP->SysPort, PORTS_PER_RTA);
+ p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE;
+ return -EINVAL;
+ }
+ if ((MapP->SysPort != NO_PORT) && (MapP->SysPort >= RIO_PORTS)) {
+ rio_dprintk(RIO_DEBUG_TABLE, "Port %d not valid!\n", (int) MapP->SysPort);
+ p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE;
+ return -EINVAL;
+ }
+
+ /*
+ ** Copy the name across to the map entry.
+ */
+ MapP->Name[MAX_NAME_LEN - 1] = '\0';
+ sptr = MapP->Name;
+ while (*sptr) {
+ if (*sptr < ' ' || *sptr > '~') {
+ rio_dprintk(RIO_DEBUG_TABLE, "Name entry contains non-printing characters!\n");
+ p->RIOError.Error = BAD_CHARACTER_IN_NAME;
+ return -EINVAL;
+ }
+ sptr++;
+ }
+
+ for (host = 0; host < p->RIONumHosts; host++) {
+ if (MapP->HostUniqueNum == p->RIOHosts[host].UniqueNum) {
+ if ((p->RIOHosts[host].Flags & RUN_STATE) != RC_RUNNING) {
+ p->RIOError.Error = HOST_NOT_RUNNING;
+ return -ENXIO;
+ }
+
+ /*
+ ** Now we have a host we need to allocate an ID
+ ** if the entry does not already have one.
+ */
+ if (MapP->ID == (ushort) - 1) {
+ int nNewID;
+
+ rio_dprintk(RIO_DEBUG_TABLE, "Attempting to get a new ID for rta \"%s\"\n", MapP->Name);
+ /*
+ ** The idea here is to allow RTA's to be assigned
+ ** before they actually appear on the network.
+ ** This allows the addition of RTA's without having
+ ** to plug them in.
+ ** What we do is:
+ ** - Find a free ID and allocate it to the RTA.
+ ** - If this map entry is the second half of a
+ ** 16 port entry then find the other half and
+ ** make sure the 2 cross reference each other.
+ */
+ if (RIOFindFreeID(p, &p->RIOHosts[host], &nNewID, NULL) != 0) {
+ p->RIOError.Error = COULDNT_FIND_ENTRY;
+ return -EBUSY;
+ }
+ MapP->ID = (ushort) nNewID + 1;
+ rio_dprintk(RIO_DEBUG_TABLE, "Allocated ID %d for this new RTA.\n", MapP->ID);
+ HostMapP = &p->RIOHosts[host].Mapping[nNewID];
+ HostMapP->RtaUniqueNum = MapP->RtaUniqueNum;
+ HostMapP->HostUniqueNum = MapP->HostUniqueNum;
+ HostMapP->ID = MapP->ID;
+ for (link = 0; link < LINKS_PER_UNIT; link++) {
+ HostMapP->Topology[link].Unit = ROUTE_DISCONNECT;
+ HostMapP->Topology[link].Link = NO_LINK;
+ }
+ if (MapP->Flags & RTA16_SECOND_SLOT) {
+ int unit;
+
+ for (unit = 0; unit < MAX_RUP; unit++)
+ if (p->RIOHosts[host].Mapping[unit].RtaUniqueNum == MapP->RtaUniqueNum)
+ break;
+ if (unit == MAX_RUP) {
+ p->RIOError.Error = COULDNT_FIND_ENTRY;
+ return -EBUSY;
+ }
+ HostMapP->Flags |= RTA16_SECOND_SLOT;
+ HostMapP->ID2 = MapP->ID2 = p->RIOHosts[host].Mapping[unit].ID;
+ p->RIOHosts[host].Mapping[unit].ID2 = MapP->ID;
+ rio_dprintk(RIO_DEBUG_TABLE, "Cross referenced id %d to ID %d.\n", MapP->ID, p->RIOHosts[host].Mapping[unit].ID);
+ }
+ }
+
+ HostMapP = &p->RIOHosts[host].Mapping[MapP->ID - 1];
+
+ if (HostMapP->Flags & SLOT_IN_USE) {
+ rio_dprintk(RIO_DEBUG_TABLE, "Map table slot for ID %d is already in use.\n", MapP->ID);
+ p->RIOError.Error = ID_ALREADY_IN_USE;
+ return -EBUSY;
+ }
+
+ /*
+ ** Assign the sys ports and the name, and mark the slot as
+ ** being in use.
+ */
+ HostMapP->SysPort = MapP->SysPort;
+ if ((MapP->Flags & RTA16_SECOND_SLOT) == 0)
+ CCOPY(MapP->Name, HostMapP->Name, MAX_NAME_LEN);
+ HostMapP->Flags = SLOT_IN_USE | RTA_BOOTED;
+#ifdef NEED_TO_FIX
+ RIO_SV_BROADCAST(p->RIOHosts[host].svFlags[MapP->ID - 1]);
+#endif
+ if (MapP->Flags & RTA16_SECOND_SLOT)
+ HostMapP->Flags |= RTA16_SECOND_SLOT;
+
+ RIOReMapPorts(p, &p->RIOHosts[host], HostMapP);
+ /*
+ ** Adjust 2nd block of 8 phbs
+ */
+ if (MapP->Flags & RTA16_SECOND_SLOT)
+ RIOFixPhbs(p, &p->RIOHosts[host], HostMapP->ID - 1);
+
+ if (HostMapP->SysPort != NO_PORT) {
+ if (HostMapP->SysPort < p->RIOFirstPortsBooted)
+ p->RIOFirstPortsBooted = HostMapP->SysPort;
+ if (HostMapP->SysPort > p->RIOLastPortsBooted)
+ p->RIOLastPortsBooted = HostMapP->SysPort;
+ }
+ if (MapP->Flags & RTA16_SECOND_SLOT)
+ rio_dprintk(RIO_DEBUG_TABLE, "Second map of RTA %s added to configuration\n", p->RIOHosts[host].Mapping[MapP->ID2 - 1].Name);
+ else
+ rio_dprintk(RIO_DEBUG_TABLE, "RTA %s added to configuration\n", MapP->Name);
+ return 0;
+ }
+ }
+ p->RIOError.Error = UNKNOWN_HOST_NUMBER;
+ rio_dprintk(RIO_DEBUG_TABLE, "Unknown host %x\n", MapP->HostUniqueNum);
+ return -ENXIO;
}
-int
-RIOReMapPorts(p, HostP, HostMapP)
-struct rio_info * p;
+int RIOReMapPorts(p, HostP, HostMapP)
+struct rio_info *p;
struct Host *HostP;
-struct Map *HostMapP;
+struct Map *HostMapP;
{
register struct Port *PortP;
uint SubEnt;
@@ -819,135 +755,127 @@
unsigned long flags;
#ifdef CHECK
- CheckHostP( HostP );
- CheckHostMapP( HostMapP );
+ CheckHostP(HostP);
+ CheckHostMapP(HostMapP);
#endif
- rio_dprintk (RIO_DEBUG_TABLE, "Mapping sysport %d to id %d\n", (int)HostMapP->SysPort, HostMapP->ID);
+ rio_dprintk(RIO_DEBUG_TABLE, "Mapping sysport %d to id %d\n", (int) HostMapP->SysPort, HostMapP->ID);
/*
- ** We need to tell the UnixRups which sysport the rup corresponds to
- */
- HostP->UnixRups[HostMapP->ID-1].BaseSysPort = HostMapP->SysPort;
+ ** We need to tell the UnixRups which sysport the rup corresponds to
+ */
+ HostP->UnixRups[HostMapP->ID - 1].BaseSysPort = HostMapP->SysPort;
- if ( HostMapP->SysPort == NO_PORT )
- return(0);
+ if (HostMapP->SysPort == NO_PORT)
+ return (0);
RtaType = GetUnitType(HostMapP->RtaUniqueNum);
- rio_dprintk (RIO_DEBUG_TABLE, "Mapping sysport %d-%d\n",
- (int)HostMapP->SysPort, (int)HostMapP->SysPort+PORTS_PER_RTA-1);
+ rio_dprintk(RIO_DEBUG_TABLE, "Mapping sysport %d-%d\n", (int) HostMapP->SysPort, (int) HostMapP->SysPort + PORTS_PER_RTA - 1);
/*
- ** now map each of its eight ports
- */
- for ( SubEnt=0; SubEnt<PORTS_PER_RTA; SubEnt++) {
- rio_dprintk (RIO_DEBUG_TABLE, "subent = %d, HostMapP->SysPort = %d\n",
- SubEnt, (int)HostMapP->SysPort);
- SysPort = HostMapP->SysPort+SubEnt; /* portnumber within system */
- /* portnumber on host */
-
- HostPort = (HostMapP->ID-1)*PORTS_PER_RTA+SubEnt;
+ ** now map each of its eight ports
+ */
+ for (SubEnt = 0; SubEnt < PORTS_PER_RTA; SubEnt++) {
+ rio_dprintk(RIO_DEBUG_TABLE, "subent = %d, HostMapP->SysPort = %d\n", SubEnt, (int) HostMapP->SysPort);
+ SysPort = HostMapP->SysPort + SubEnt; /* portnumber within system */
+ /* portnumber on host */
- rio_dprintk (RIO_DEBUG_TABLE, "c1 p = %p, p->rioPortp = %p\n", p, p->RIOPortp);
+ HostPort = (HostMapP->ID - 1) * PORTS_PER_RTA + SubEnt;
+
+ rio_dprintk(RIO_DEBUG_TABLE, "c1 p = %p, p->rioPortp = %p\n", p, p->RIOPortp);
PortP = p->RIOPortp[SysPort];
#if 0
- PortP->TtyP = &p->channel[SysPort];
+ PortP->TtyP = &p->channel[SysPort];
#endif
- rio_dprintk (RIO_DEBUG_TABLE, "Map port\n");
+ rio_dprintk(RIO_DEBUG_TABLE, "Map port\n");
/*
- ** Point at all the real neat data structures
- */
+ ** Point at all the real neat data structures
+ */
rio_spin_lock_irqsave(&PortP->portSem, flags);
PortP->HostP = HostP;
PortP->Caddr = HostP->Caddr;
/*
- ** The PhbP cannot be filled in yet
- ** unless the host has been booted
- */
+ ** The PhbP cannot be filled in yet
+ ** unless the host has been booted
+ */
if ((HostP->Flags & RUN_STATE) == RC_RUNNING) {
struct PHB *PhbP = PortP->PhbP = &HostP->PhbP[HostPort];
- PortP->TxAdd =(WORD *)RIO_PTR(HostP->Caddr,RWORD(PhbP->tx_add));
- PortP->TxStart =(WORD *)RIO_PTR(HostP->Caddr,RWORD(PhbP->tx_start));
- PortP->TxEnd =(WORD *)RIO_PTR(HostP->Caddr,RWORD(PhbP->tx_end));
- PortP->RxRemove=(WORD *)RIO_PTR(HostP->Caddr,
- RWORD(PhbP->rx_remove));
- PortP->RxStart =(WORD *)RIO_PTR(HostP->Caddr,RWORD(PhbP->rx_start));
- PortP->RxEnd =(WORD *)RIO_PTR(HostP->Caddr,RWORD(PhbP->rx_end));
- }
- else
+ PortP->TxAdd = (WORD *) RIO_PTR(HostP->Caddr, RWORD(PhbP->tx_add));
+ PortP->TxStart = (WORD *) RIO_PTR(HostP->Caddr, RWORD(PhbP->tx_start));
+ PortP->TxEnd = (WORD *) RIO_PTR(HostP->Caddr, RWORD(PhbP->tx_end));
+ PortP->RxRemove = (WORD *) RIO_PTR(HostP->Caddr, RWORD(PhbP->rx_remove));
+ PortP->RxStart = (WORD *) RIO_PTR(HostP->Caddr, RWORD(PhbP->rx_start));
+ PortP->RxEnd = (WORD *) RIO_PTR(HostP->Caddr, RWORD(PhbP->rx_end));
+ } else
PortP->PhbP = NULL;
/*
- ** port related flags
- */
- PortP->HostPort = HostPort;
+ ** port related flags
+ */
+ PortP->HostPort = HostPort;
/*
- ** For each part of a 16 port RTA, RupNum is ID - 1.
- */
+ ** For each part of a 16 port RTA, RupNum is ID - 1.
+ */
PortP->RupNum = HostMapP->ID - 1;
if (HostMapP->Flags & RTA16_SECOND_SLOT) {
- PortP->ID2 = HostMapP->ID2 - 1;
- PortP->SecondBlock = TRUE;
- }
- else {
- PortP->ID2 = 0;
- PortP->SecondBlock = FALSE;
- }
- PortP->RtaUniqueNum = HostMapP->RtaUniqueNum;
-
- /*
- ** If the port was already mapped then thats all we need to do.
- */
- if (PortP->Mapped) {
- rio_spin_unlock_irqrestore( &PortP->portSem, flags);
- continue;
- }
- else HostMapP->Flags &= ~RTA_NEWBOOT;
-
- PortP->State = 0;
- PortP->Config = 0;
- /*
- ** Check out the module type - if it is special (read only etc.)
- ** then we need to set flags in the PortP->Config.
- ** Note: For 16 port RTA, all ports are of the same type.
- */
- if (RtaType == TYPE_RTA16) {
- PortP->Config |= p->RIOModuleTypes[HostP->UnixRups
- [HostMapP->ID-1].ModTypes].Flags[SubEnt % PORTS_PER_MODULE];
+ PortP->ID2 = HostMapP->ID2 - 1;
+ PortP->SecondBlock = TRUE;
} else {
- if ( SubEnt < PORTS_PER_MODULE )
- PortP->Config |= p->RIOModuleTypes[LONYBLE(HostP->UnixRups
- [HostMapP->ID-1].ModTypes)].Flags[SubEnt % PORTS_PER_MODULE];
+ PortP->ID2 = 0;
+ PortP->SecondBlock = FALSE;
+ }
+ PortP->RtaUniqueNum = HostMapP->RtaUniqueNum;
+
+ /*
+ ** If the port was already mapped then thats all we need to do.
+ */
+ if (PortP->Mapped) {
+ rio_spin_unlock_irqrestore(&PortP->portSem, flags);
+ continue;
+ } else
+ HostMapP->Flags &= ~RTA_NEWBOOT;
+
+ PortP->State = 0;
+ PortP->Config = 0;
+ /*
+ ** Check out the module type - if it is special (read only etc.)
+ ** then we need to set flags in the PortP->Config.
+ ** Note: For 16 port RTA, all ports are of the same type.
+ */
+ if (RtaType == TYPE_RTA16) {
+ PortP->Config |= p->RIOModuleTypes[HostP->UnixRups[HostMapP->ID - 1].ModTypes].Flags[SubEnt % PORTS_PER_MODULE];
+ } else {
+ if (SubEnt < PORTS_PER_MODULE)
+ PortP->Config |= p->RIOModuleTypes[LONYBLE(HostP->UnixRups[HostMapP->ID - 1].ModTypes)].Flags[SubEnt % PORTS_PER_MODULE];
else
- PortP->Config |= p->RIOModuleTypes[HINYBLE(HostP->UnixRups
- [HostMapP->ID-1].ModTypes)].Flags[SubEnt % PORTS_PER_MODULE];
+ PortP->Config |= p->RIOModuleTypes[HINYBLE(HostP->UnixRups[HostMapP->ID - 1].ModTypes)].Flags[SubEnt % PORTS_PER_MODULE];
}
/*
- ** more port related flags
- */
- PortP->PortState = 0;
- PortP->ModemLines = 0;
- PortP->ModemState = 0;
- PortP->CookMode = COOK_WELL;
- PortP->ParamSem = 0;
- PortP->FlushCmdBodge= 0;
- PortP->WflushFlag = 0;
- PortP->MagicFlags = 0;
- PortP->Lock = 0;
- PortP->Store = 0;
- PortP->FirstOpen = 1;
+ ** more port related flags
+ */
+ PortP->PortState = 0;
+ PortP->ModemLines = 0;
+ PortP->ModemState = 0;
+ PortP->CookMode = COOK_WELL;
+ PortP->ParamSem = 0;
+ PortP->FlushCmdBodge = 0;
+ PortP->WflushFlag = 0;
+ PortP->MagicFlags = 0;
+ PortP->Lock = 0;
+ PortP->Store = 0;
+ PortP->FirstOpen = 1;
/*
- ** Buffers 'n things
- */
- PortP->RxDataStart = 0;
- PortP->Cor2Copy = 0;
- PortP->Name = &HostMapP->Name[0];
+ ** Buffers 'n things
+ */
+ PortP->RxDataStart = 0;
+ PortP->Cor2Copy = 0;
+ PortP->Name = &HostMapP->Name[0];
#ifdef STATS
- bzero( (caddr_t)&PortP->Stat, sizeof(struct RIOStats) );
+ bzero((caddr_t) & PortP->Stat, sizeof(struct RIOStats));
#endif
PortP->statsGather = 0;
PortP->txchars = 0;
@@ -955,90 +883,87 @@
PortP->opens = 0;
PortP->closes = 0;
PortP->ioctls = 0;
- if ( PortP->TxRingBuffer )
- bzero( PortP->TxRingBuffer, p->RIOBufferSize );
- else if ( p->RIOBufferSize ) {
+ if (PortP->TxRingBuffer)
+ bzero(PortP->TxRingBuffer, p->RIOBufferSize);
+ else if (p->RIOBufferSize) {
PortP->TxRingBuffer = sysbrk(p->RIOBufferSize);
- bzero( PortP->TxRingBuffer, p->RIOBufferSize );
+ bzero(PortP->TxRingBuffer, p->RIOBufferSize);
}
- PortP->TxBufferOut = 0;
- PortP->TxBufferIn = 0;
- PortP->Debug = 0;
+ PortP->TxBufferOut = 0;
+ PortP->TxBufferIn = 0;
+ PortP->Debug = 0;
/*
- ** LastRxTgl stores the state of the rx toggle bit for this
- ** port, to be compared with the state of the next pkt received.
- ** If the same, we have received the same rx pkt from the RTA
- ** twice. Initialise to a value not equal to PHB_RX_TGL or 0.
- */
- PortP->LastRxTgl = ~(uchar)PHB_RX_TGL;
+ ** LastRxTgl stores the state of the rx toggle bit for this
+ ** port, to be compared with the state of the next pkt received.
+ ** If the same, we have received the same rx pkt from the RTA
+ ** twice. Initialise to a value not equal to PHB_RX_TGL or 0.
+ */
+ PortP->LastRxTgl = ~(uchar) PHB_RX_TGL;
/*
- ** and mark the port as usable
- */
+ ** and mark the port as usable
+ */
PortP->Mapped = 1;
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
}
- if ( HostMapP->SysPort < p->RIOFirstPortsMapped )
+ if (HostMapP->SysPort < p->RIOFirstPortsMapped)
p->RIOFirstPortsMapped = HostMapP->SysPort;
- if ( HostMapP->SysPort > p->RIOLastPortsMapped )
+ if (HostMapP->SysPort > p->RIOLastPortsMapped)
p->RIOLastPortsMapped = HostMapP->SysPort;
return 0;
}
-int
-RIOChangeName(p, MapP)
+int RIOChangeName(p, MapP)
struct rio_info *p;
-struct Map* MapP;
+struct Map *MapP;
{
int host;
struct Map *HostMapP;
char *sptr;
- rio_dprintk (RIO_DEBUG_TABLE, "Change name entry on host %x, rta %x, ID %d, Sysport %d\n",
- MapP->HostUniqueNum,MapP->RtaUniqueNum,
- MapP->ID, (int)MapP->SysPort);
+ rio_dprintk(RIO_DEBUG_TABLE, "Change name entry on host %x, rta %x, ID %d, Sysport %d\n", MapP->HostUniqueNum, MapP->RtaUniqueNum, MapP->ID, (int) MapP->SysPort);
- if ( MapP->ID > MAX_RUP ) {
- rio_dprintk (RIO_DEBUG_TABLE, "Bad ID in map entry!\n");
+ if (MapP->ID > MAX_RUP) {
+ rio_dprintk(RIO_DEBUG_TABLE, "Bad ID in map entry!\n");
p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE;
return -EINVAL;
}
- MapP->Name[MAX_NAME_LEN-1] = '\0';
+ MapP->Name[MAX_NAME_LEN - 1] = '\0';
sptr = MapP->Name;
- while ( *sptr ) {
- if ( *sptr<' ' || *sptr>'~' ) {
- rio_dprintk (RIO_DEBUG_TABLE, "Name entry contains non-printing characters!\n");
+ while (*sptr) {
+ if (*sptr < ' ' || *sptr > '~') {
+ rio_dprintk(RIO_DEBUG_TABLE, "Name entry contains non-printing characters!\n");
p->RIOError.Error = BAD_CHARACTER_IN_NAME;
return -EINVAL;
}
sptr++;
}
- for ( host=0; host < p->RIONumHosts; host++ ) {
- if ( MapP->HostUniqueNum == p->RIOHosts[host].UniqueNum ) {
- if ( (p->RIOHosts[host].Flags & RUN_STATE) != RC_RUNNING ) {
+ for (host = 0; host < p->RIONumHosts; host++) {
+ if (MapP->HostUniqueNum == p->RIOHosts[host].UniqueNum) {
+ if ((p->RIOHosts[host].Flags & RUN_STATE) != RC_RUNNING) {
p->RIOError.Error = HOST_NOT_RUNNING;
return -ENXIO;
}
- if ( MapP->ID==0 ) {
- CCOPY( MapP->Name, p->RIOHosts[host].Name, MAX_NAME_LEN );
+ if (MapP->ID == 0) {
+ CCOPY(MapP->Name, p->RIOHosts[host].Name, MAX_NAME_LEN);
return 0;
}
- HostMapP = &p->RIOHosts[host].Mapping[MapP->ID-1];
+ HostMapP = &p->RIOHosts[host].Mapping[MapP->ID - 1];
- if ( HostMapP->RtaUniqueNum != MapP->RtaUniqueNum ) {
+ if (HostMapP->RtaUniqueNum != MapP->RtaUniqueNum) {
p->RIOError.Error = RTA_NUMBER_WRONG;
return -ENXIO;
}
- CCOPY( MapP->Name, HostMapP->Name, MAX_NAME_LEN );
+ CCOPY(MapP->Name, HostMapP->Name, MAX_NAME_LEN);
return 0;
}
}
p->RIOError.Error = UNKNOWN_HOST_NUMBER;
- rio_dprintk (RIO_DEBUG_TABLE, "Unknown host %x\n", MapP->HostUniqueNum);
+ rio_dprintk(RIO_DEBUG_TABLE, "Unknown host %x\n", MapP->HostUniqueNum);
return -ENXIO;
}