|  | /* | 
|  | *  Copyright (C) 1994-1998	   Linus Torvalds & authors (see below) | 
|  | *  Copyright (C) 1998-2002	   Linux ATA Development | 
|  | *				      Andre Hedrick <andre@linux-ide.org> | 
|  | *  Copyright (C) 2003		   Red Hat | 
|  | *  Copyright (C) 2003-2005, 2007  Bartlomiej Zolnierkiewicz | 
|  | */ | 
|  |  | 
|  | /* | 
|  | *  Mostly written by Mark Lord <mlord@pobox.com> | 
|  | *                and Gadi Oxman <gadio@netvision.net.il> | 
|  | *                and Andre Hedrick <andre@linux-ide.org> | 
|  | * | 
|  | * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c. | 
|  | */ | 
|  |  | 
|  | #include <linux/types.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/major.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/genhd.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/leds.h> | 
|  | #include <linux/ide.h> | 
|  |  | 
|  | #include <asm/byteorder.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/div64.h> | 
|  |  | 
|  | #include "ide-disk.h" | 
|  |  | 
|  | static const u8 ide_rw_cmds[] = { | 
|  | ATA_CMD_READ_MULTI, | 
|  | ATA_CMD_WRITE_MULTI, | 
|  | ATA_CMD_READ_MULTI_EXT, | 
|  | ATA_CMD_WRITE_MULTI_EXT, | 
|  | ATA_CMD_PIO_READ, | 
|  | ATA_CMD_PIO_WRITE, | 
|  | ATA_CMD_PIO_READ_EXT, | 
|  | ATA_CMD_PIO_WRITE_EXT, | 
|  | ATA_CMD_READ, | 
|  | ATA_CMD_WRITE, | 
|  | ATA_CMD_READ_EXT, | 
|  | ATA_CMD_WRITE_EXT, | 
|  | }; | 
|  |  | 
|  | static void ide_tf_set_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 dma) | 
|  | { | 
|  | u8 index, lba48, write; | 
|  |  | 
|  | lba48 = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0; | 
|  | write = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0; | 
|  |  | 
|  | if (dma) { | 
|  | cmd->protocol = ATA_PROT_DMA; | 
|  | index = 8; | 
|  | } else { | 
|  | cmd->protocol = ATA_PROT_PIO; | 
|  | if (drive->mult_count) { | 
|  | cmd->tf_flags |= IDE_TFLAG_MULTI_PIO; | 
|  | index = 0; | 
|  | } else | 
|  | index = 4; | 
|  | } | 
|  |  | 
|  | cmd->tf.command = ide_rw_cmds[index + lba48 + write]; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * __ide_do_rw_disk() issues READ and WRITE commands to a disk, | 
|  | * using LBA if supported, or CHS otherwise, to address sectors. | 
|  | */ | 
|  | static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, | 
|  | sector_t block) | 
|  | { | 
|  | ide_hwif_t *hwif	= drive->hwif; | 
|  | u16 nsectors		= (u16)blk_rq_sectors(rq); | 
|  | u8 lba48		= !!(drive->dev_flags & IDE_DFLAG_LBA48); | 
|  | u8 dma			= !!(drive->dev_flags & IDE_DFLAG_USING_DMA); | 
|  | struct ide_cmd		cmd; | 
|  | struct ide_taskfile	*tf = &cmd.tf; | 
|  | ide_startstop_t		rc; | 
|  |  | 
|  | if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) { | 
|  | if (block + blk_rq_sectors(rq) > 1ULL << 28) | 
|  | dma = 0; | 
|  | else | 
|  | lba48 = 0; | 
|  | } | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; | 
|  | cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE; | 
|  |  | 
|  | if (drive->dev_flags & IDE_DFLAG_LBA) { | 
|  | if (lba48) { | 
|  | pr_debug("%s: LBA=0x%012llx\n", drive->name, | 
|  | (unsigned long long)block); | 
|  |  | 
|  | tf->nsect  = nsectors & 0xff; | 
|  | tf->lbal   = (u8) block; | 
|  | tf->lbam   = (u8)(block >>  8); | 
|  | tf->lbah   = (u8)(block >> 16); | 
|  | tf->device = ATA_LBA; | 
|  |  | 
|  | tf = &cmd.hob; | 
|  | tf->nsect = (nsectors >> 8) & 0xff; | 
|  | tf->lbal  = (u8)(block >> 24); | 
|  | if (sizeof(block) != 4) { | 
|  | tf->lbam = (u8)((u64)block >> 32); | 
|  | tf->lbah = (u8)((u64)block >> 40); | 
|  | } | 
|  |  | 
|  | cmd.valid.out.hob = IDE_VALID_OUT_HOB; | 
|  | cmd.valid.in.hob  = IDE_VALID_IN_HOB; | 
|  | cmd.tf_flags |= IDE_TFLAG_LBA48; | 
|  | } else { | 
|  | tf->nsect  = nsectors & 0xff; | 
|  | tf->lbal   = block; | 
|  | tf->lbam   = block >>= 8; | 
|  | tf->lbah   = block >>= 8; | 
|  | tf->device = ((block >> 8) & 0xf) | ATA_LBA; | 
|  | } | 
|  | } else { | 
|  | unsigned int sect, head, cyl, track; | 
|  |  | 
|  | track = (int)block / drive->sect; | 
|  | sect  = (int)block % drive->sect + 1; | 
|  | head  = track % drive->head; | 
|  | cyl   = track / drive->head; | 
|  |  | 
|  | pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect); | 
|  |  | 
|  | tf->nsect  = nsectors & 0xff; | 
|  | tf->lbal   = sect; | 
|  | tf->lbam   = cyl; | 
|  | tf->lbah   = cyl >> 8; | 
|  | tf->device = head; | 
|  | } | 
|  |  | 
|  | cmd.tf_flags |= IDE_TFLAG_FS; | 
|  |  | 
|  | if (rq_data_dir(rq)) | 
|  | cmd.tf_flags |= IDE_TFLAG_WRITE; | 
|  |  | 
|  | ide_tf_set_cmd(drive, &cmd, dma); | 
|  | cmd.rq = rq; | 
|  |  | 
|  | if (dma == 0) { | 
|  | ide_init_sg_cmd(&cmd, nsectors << 9); | 
|  | ide_map_sg(drive, &cmd); | 
|  | } | 
|  |  | 
|  | rc = do_rw_taskfile(drive, &cmd); | 
|  |  | 
|  | if (rc == ide_stopped && dma) { | 
|  | /* fallback to PIO */ | 
|  | cmd.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK; | 
|  | ide_tf_set_cmd(drive, &cmd, 0); | 
|  | ide_init_sg_cmd(&cmd, nsectors << 9); | 
|  | rc = do_rw_taskfile(drive, &cmd); | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * 268435455  == 137439 MB or 28bit limit | 
|  | * 320173056  == 163929 MB or 48bit addressing | 
|  | * 1073741822 == 549756 MB or 48bit addressing fake drive | 
|  | */ | 
|  |  | 
|  | static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq, | 
|  | sector_t block) | 
|  | { | 
|  | ide_hwif_t *hwif = drive->hwif; | 
|  |  | 
|  | BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED); | 
|  | BUG_ON(!blk_fs_request(rq)); | 
|  |  | 
|  | ledtrig_ide_activity(); | 
|  |  | 
|  | pr_debug("%s: %sing: block=%llu, sectors=%u, buffer=0x%08lx\n", | 
|  | drive->name, rq_data_dir(rq) == READ ? "read" : "writ", | 
|  | (unsigned long long)block, blk_rq_sectors(rq), | 
|  | (unsigned long)rq->buffer); | 
|  |  | 
|  | if (hwif->rw_disk) | 
|  | hwif->rw_disk(drive, rq); | 
|  |  | 
|  | return __ide_do_rw_disk(drive, rq, block); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Queries for true maximum capacity of the drive. | 
|  | * Returns maximum LBA address (> 0) of the drive, 0 if failed. | 
|  | */ | 
|  | static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) | 
|  | { | 
|  | struct ide_cmd cmd; | 
|  | struct ide_taskfile *tf = &cmd.tf; | 
|  | u64 addr = 0; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | if (lba48) | 
|  | tf->command = ATA_CMD_READ_NATIVE_MAX_EXT; | 
|  | else | 
|  | tf->command = ATA_CMD_READ_NATIVE_MAX; | 
|  | tf->device  = ATA_LBA; | 
|  |  | 
|  | cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; | 
|  | cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE; | 
|  | if (lba48) { | 
|  | cmd.valid.out.hob = IDE_VALID_OUT_HOB; | 
|  | cmd.valid.in.hob  = IDE_VALID_IN_HOB; | 
|  | cmd.tf_flags = IDE_TFLAG_LBA48; | 
|  | } | 
|  |  | 
|  | ide_no_data_taskfile(drive, &cmd); | 
|  |  | 
|  | /* if OK, compute maximum address value */ | 
|  | if (!(tf->status & ATA_ERR)) | 
|  | addr = ide_get_lba_addr(&cmd, lba48) + 1; | 
|  |  | 
|  | return addr; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sets maximum virtual LBA address of the drive. | 
|  | * Returns new maximum virtual LBA address (> 0) or 0 on failure. | 
|  | */ | 
|  | static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) | 
|  | { | 
|  | struct ide_cmd cmd; | 
|  | struct ide_taskfile *tf = &cmd.tf; | 
|  | u64 addr_set = 0; | 
|  |  | 
|  | addr_req--; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | tf->lbal     = (addr_req >>  0) & 0xff; | 
|  | tf->lbam     = (addr_req >>= 8) & 0xff; | 
|  | tf->lbah     = (addr_req >>= 8) & 0xff; | 
|  | if (lba48) { | 
|  | cmd.hob.lbal = (addr_req >>= 8) & 0xff; | 
|  | cmd.hob.lbam = (addr_req >>= 8) & 0xff; | 
|  | cmd.hob.lbah = (addr_req >>= 8) & 0xff; | 
|  | tf->command  = ATA_CMD_SET_MAX_EXT; | 
|  | } else { | 
|  | tf->device   = (addr_req >>= 8) & 0x0f; | 
|  | tf->command  = ATA_CMD_SET_MAX; | 
|  | } | 
|  | tf->device |= ATA_LBA; | 
|  |  | 
|  | cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; | 
|  | cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE; | 
|  | if (lba48) { | 
|  | cmd.valid.out.hob = IDE_VALID_OUT_HOB; | 
|  | cmd.valid.in.hob  = IDE_VALID_IN_HOB; | 
|  | cmd.tf_flags = IDE_TFLAG_LBA48; | 
|  | } | 
|  |  | 
|  | ide_no_data_taskfile(drive, &cmd); | 
|  |  | 
|  | /* if OK, compute maximum address value */ | 
|  | if (!(tf->status & ATA_ERR)) | 
|  | addr_set = ide_get_lba_addr(&cmd, lba48) + 1; | 
|  |  | 
|  | return addr_set; | 
|  | } | 
|  |  | 
|  | static unsigned long long sectors_to_MB(unsigned long long n) | 
|  | { | 
|  | n <<= 9;		/* make it bytes */ | 
|  | do_div(n, 1000000);	/* make it MB */ | 
|  | return n; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Some disks report total number of sectors instead of | 
|  | * maximum sector address.  We list them here. | 
|  | */ | 
|  | static const struct drive_list_entry hpa_list[] = { | 
|  | { "ST340823A",	NULL }, | 
|  | { "ST320413A",	NULL }, | 
|  | { "ST310211A",	NULL }, | 
|  | { NULL,		NULL } | 
|  | }; | 
|  |  | 
|  | static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48) | 
|  | { | 
|  | u64 capacity, set_max; | 
|  |  | 
|  | capacity = drive->capacity64; | 
|  | set_max  = idedisk_read_native_max_address(drive, lba48); | 
|  |  | 
|  | if (ide_in_drive_list(drive->id, hpa_list)) { | 
|  | /* | 
|  | * Since we are inclusive wrt to firmware revisions do this | 
|  | * extra check and apply the workaround only when needed. | 
|  | */ | 
|  | if (set_max == capacity + 1) | 
|  | set_max--; | 
|  | } | 
|  |  | 
|  | return set_max; | 
|  | } | 
|  |  | 
|  | static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48) | 
|  | { | 
|  | set_max = idedisk_set_max_address(drive, set_max, lba48); | 
|  | if (set_max) | 
|  | drive->capacity64 = set_max; | 
|  |  | 
|  | return set_max; | 
|  | } | 
|  |  | 
|  | static void idedisk_check_hpa(ide_drive_t *drive) | 
|  | { | 
|  | u64 capacity, set_max; | 
|  | int lba48 = ata_id_lba48_enabled(drive->id); | 
|  |  | 
|  | capacity = drive->capacity64; | 
|  | set_max  = ide_disk_hpa_get_native_capacity(drive, lba48); | 
|  |  | 
|  | if (set_max <= capacity) | 
|  | return; | 
|  |  | 
|  | drive->probed_capacity = set_max; | 
|  |  | 
|  | printk(KERN_INFO "%s: Host Protected Area detected.\n" | 
|  | "\tcurrent capacity is %llu sectors (%llu MB)\n" | 
|  | "\tnative  capacity is %llu sectors (%llu MB)\n", | 
|  | drive->name, | 
|  | capacity, sectors_to_MB(capacity), | 
|  | set_max, sectors_to_MB(set_max)); | 
|  |  | 
|  | if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0) | 
|  | return; | 
|  |  | 
|  | set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48); | 
|  | if (set_max) | 
|  | printk(KERN_INFO "%s: Host Protected Area disabled.\n", | 
|  | drive->name); | 
|  | } | 
|  |  | 
|  | static int ide_disk_get_capacity(ide_drive_t *drive) | 
|  | { | 
|  | u16 *id = drive->id; | 
|  | int lba; | 
|  |  | 
|  | if (ata_id_lba48_enabled(id)) { | 
|  | /* drive speaks 48-bit LBA */ | 
|  | lba = 1; | 
|  | drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); | 
|  | } else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) { | 
|  | /* drive speaks 28-bit LBA */ | 
|  | lba = 1; | 
|  | drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY); | 
|  | } else { | 
|  | /* drive speaks boring old 28-bit CHS */ | 
|  | lba = 0; | 
|  | drive->capacity64 = drive->cyl * drive->head * drive->sect; | 
|  | } | 
|  |  | 
|  | drive->probed_capacity = drive->capacity64; | 
|  |  | 
|  | if (lba) { | 
|  | drive->dev_flags |= IDE_DFLAG_LBA; | 
|  |  | 
|  | /* | 
|  | * If this device supports the Host Protected Area feature set, | 
|  | * then we may need to change our opinion about its capacity. | 
|  | */ | 
|  | if (ata_id_hpa_enabled(id)) | 
|  | idedisk_check_hpa(drive); | 
|  | } | 
|  |  | 
|  | /* limit drive capacity to 137GB if LBA48 cannot be used */ | 
|  | if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 && | 
|  | drive->capacity64 > 1ULL << 28) { | 
|  | printk(KERN_WARNING "%s: cannot use LBA48 - full capacity " | 
|  | "%llu sectors (%llu MB)\n", | 
|  | drive->name, (unsigned long long)drive->capacity64, | 
|  | sectors_to_MB(drive->capacity64)); | 
|  | drive->probed_capacity = drive->capacity64 = 1ULL << 28; | 
|  | } | 
|  |  | 
|  | if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && | 
|  | (drive->dev_flags & IDE_DFLAG_LBA48)) { | 
|  | if (drive->capacity64 > 1ULL << 28) { | 
|  | printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode" | 
|  | " will be used for accessing sectors " | 
|  | "> %u\n", drive->name, 1 << 28); | 
|  | } else | 
|  | drive->dev_flags &= ~IDE_DFLAG_LBA48; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u64 ide_disk_set_capacity(ide_drive_t *drive, u64 capacity) | 
|  | { | 
|  | u64 set = min(capacity, drive->probed_capacity); | 
|  | u16 *id = drive->id; | 
|  | int lba48 = ata_id_lba48_enabled(id); | 
|  |  | 
|  | if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 || | 
|  | ata_id_hpa_enabled(id) == 0) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * according to the spec the SET MAX ADDRESS command shall be | 
|  | * immediately preceded by a READ NATIVE MAX ADDRESS command | 
|  | */ | 
|  | capacity = ide_disk_hpa_get_native_capacity(drive, lba48); | 
|  | if (capacity == 0) | 
|  | goto out; | 
|  |  | 
|  | set = ide_disk_hpa_set_capacity(drive, set, lba48); | 
|  | if (set) { | 
|  | /* needed for ->resume to disable HPA */ | 
|  | drive->dev_flags |= IDE_DFLAG_NOHPA; | 
|  | return set; | 
|  | } | 
|  | out: | 
|  | return drive->capacity64; | 
|  | } | 
|  |  | 
|  | static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) | 
|  | { | 
|  | ide_drive_t *drive = q->queuedata; | 
|  | struct ide_cmd *cmd = kmalloc(sizeof(*cmd), GFP_ATOMIC); | 
|  |  | 
|  | /* FIXME: map struct ide_taskfile on rq->cmd[] */ | 
|  | BUG_ON(cmd == NULL); | 
|  |  | 
|  | memset(cmd, 0, sizeof(*cmd)); | 
|  | if (ata_id_flush_ext_enabled(drive->id) && | 
|  | (drive->capacity64 >= (1UL << 28))) | 
|  | cmd->tf.command = ATA_CMD_FLUSH_EXT; | 
|  | else | 
|  | cmd->tf.command = ATA_CMD_FLUSH; | 
|  | cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; | 
|  | cmd->tf_flags = IDE_TFLAG_DYN; | 
|  | cmd->protocol = ATA_PROT_NODATA; | 
|  |  | 
|  | rq->cmd_type = REQ_TYPE_ATA_TASKFILE; | 
|  | rq->special = cmd; | 
|  | cmd->rq = rq; | 
|  | } | 
|  |  | 
|  | ide_devset_get(multcount, mult_count); | 
|  |  | 
|  | /* | 
|  | * This is tightly woven into the driver->do_special can not touch. | 
|  | * DON'T do it again until a total personality rewrite is committed. | 
|  | */ | 
|  | static int set_multcount(ide_drive_t *drive, int arg) | 
|  | { | 
|  | struct request *rq; | 
|  | int error; | 
|  |  | 
|  | if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (drive->special_flags & IDE_SFLAG_SET_MULTMODE) | 
|  | return -EBUSY; | 
|  |  | 
|  | rq = blk_get_request(drive->queue, READ, __GFP_WAIT); | 
|  | rq->cmd_type = REQ_TYPE_ATA_TASKFILE; | 
|  |  | 
|  | drive->mult_req = arg; | 
|  | drive->special_flags |= IDE_SFLAG_SET_MULTMODE; | 
|  | error = blk_execute_rq(drive->queue, NULL, rq, 0); | 
|  | blk_put_request(rq); | 
|  |  | 
|  | return (drive->mult_count == arg) ? 0 : -EIO; | 
|  | } | 
|  |  | 
|  | ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR); | 
|  |  | 
|  | static int set_nowerr(ide_drive_t *drive, int arg) | 
|  | { | 
|  | if (arg < 0 || arg > 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (arg) | 
|  | drive->dev_flags |= IDE_DFLAG_NOWERR; | 
|  | else | 
|  | drive->dev_flags &= ~IDE_DFLAG_NOWERR; | 
|  |  | 
|  | drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect) | 
|  | { | 
|  | struct ide_cmd cmd; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.tf.feature = feature; | 
|  | cmd.tf.nsect   = nsect; | 
|  | cmd.tf.command = ATA_CMD_SET_FEATURES; | 
|  | cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; | 
|  | cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE; | 
|  |  | 
|  | return ide_no_data_taskfile(drive, &cmd); | 
|  | } | 
|  |  | 
|  | static void update_ordered(ide_drive_t *drive) | 
|  | { | 
|  | u16 *id = drive->id; | 
|  | unsigned ordered = QUEUE_ORDERED_NONE; | 
|  | prepare_flush_fn *prep_fn = NULL; | 
|  |  | 
|  | if (drive->dev_flags & IDE_DFLAG_WCACHE) { | 
|  | unsigned long long capacity; | 
|  | int barrier; | 
|  | /* | 
|  | * We must avoid issuing commands a drive does not | 
|  | * understand or we may crash it. We check flush cache | 
|  | * is supported. We also check we have the LBA48 flush | 
|  | * cache if the drive capacity is too large. By this | 
|  | * time we have trimmed the drive capacity if LBA48 is | 
|  | * not available so we don't need to recheck that. | 
|  | */ | 
|  | capacity = ide_gd_capacity(drive); | 
|  | barrier = ata_id_flush_enabled(id) && | 
|  | (drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 && | 
|  | ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 || | 
|  | capacity <= (1ULL << 28) || | 
|  | ata_id_flush_ext_enabled(id)); | 
|  |  | 
|  | printk(KERN_INFO "%s: cache flushes %ssupported\n", | 
|  | drive->name, barrier ? "" : "not "); | 
|  |  | 
|  | if (barrier) { | 
|  | ordered = QUEUE_ORDERED_DRAIN_FLUSH; | 
|  | prep_fn = idedisk_prepare_flush; | 
|  | } | 
|  | } else | 
|  | ordered = QUEUE_ORDERED_DRAIN; | 
|  |  | 
|  | blk_queue_ordered(drive->queue, ordered, prep_fn); | 
|  | } | 
|  |  | 
|  | ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE); | 
|  |  | 
|  | static int set_wcache(ide_drive_t *drive, int arg) | 
|  | { | 
|  | int err = 1; | 
|  |  | 
|  | if (arg < 0 || arg > 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (ata_id_flush_enabled(drive->id)) { | 
|  | err = ide_do_setfeature(drive, | 
|  | arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0); | 
|  | if (err == 0) { | 
|  | if (arg) | 
|  | drive->dev_flags |= IDE_DFLAG_WCACHE; | 
|  | else | 
|  | drive->dev_flags &= ~IDE_DFLAG_WCACHE; | 
|  | } | 
|  | } | 
|  |  | 
|  | update_ordered(drive); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int do_idedisk_flushcache(ide_drive_t *drive) | 
|  | { | 
|  | struct ide_cmd cmd; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | if (ata_id_flush_ext_enabled(drive->id)) | 
|  | cmd.tf.command = ATA_CMD_FLUSH_EXT; | 
|  | else | 
|  | cmd.tf.command = ATA_CMD_FLUSH; | 
|  | cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; | 
|  | cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE; | 
|  |  | 
|  | return ide_no_data_taskfile(drive, &cmd); | 
|  | } | 
|  |  | 
|  | ide_devset_get(acoustic, acoustic); | 
|  |  | 
|  | static int set_acoustic(ide_drive_t *drive, int arg) | 
|  | { | 
|  | if (arg < 0 || arg > 254) | 
|  | return -EINVAL; | 
|  |  | 
|  | ide_do_setfeature(drive, | 
|  | arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg); | 
|  |  | 
|  | drive->acoustic = arg; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | ide_devset_get_flag(addressing, IDE_DFLAG_LBA48); | 
|  |  | 
|  | /* | 
|  | * drive->addressing: | 
|  | *	0: 28-bit | 
|  | *	1: 48-bit | 
|  | *	2: 48-bit capable doing 28-bit | 
|  | */ | 
|  | static int set_addressing(ide_drive_t *drive, int arg) | 
|  | { | 
|  | if (arg < 0 || arg > 2) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) || | 
|  | ata_id_lba48_enabled(drive->id) == 0)) | 
|  | return -EIO; | 
|  |  | 
|  | if (arg == 2) | 
|  | arg = 0; | 
|  |  | 
|  | if (arg) | 
|  | drive->dev_flags |= IDE_DFLAG_LBA48; | 
|  | else | 
|  | drive->dev_flags &= ~IDE_DFLAG_LBA48; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | ide_ext_devset_rw(acoustic, acoustic); | 
|  | ide_ext_devset_rw(address, addressing); | 
|  | ide_ext_devset_rw(multcount, multcount); | 
|  | ide_ext_devset_rw(wcache, wcache); | 
|  |  | 
|  | ide_ext_devset_rw_sync(nowerr, nowerr); | 
|  |  | 
|  | static int ide_disk_check(ide_drive_t *drive, const char *s) | 
|  | { | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void ide_disk_setup(ide_drive_t *drive) | 
|  | { | 
|  | struct ide_disk_obj *idkp = drive->driver_data; | 
|  | struct request_queue *q = drive->queue; | 
|  | ide_hwif_t *hwif = drive->hwif; | 
|  | u16 *id = drive->id; | 
|  | char *m = (char *)&id[ATA_ID_PROD]; | 
|  | unsigned long long capacity; | 
|  |  | 
|  | ide_proc_register_driver(drive, idkp->driver); | 
|  |  | 
|  | if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) | 
|  | return; | 
|  |  | 
|  | if (drive->dev_flags & IDE_DFLAG_REMOVABLE) { | 
|  | /* | 
|  | * Removable disks (eg. SYQUEST); ignore 'WD' drives | 
|  | */ | 
|  | if (m[0] != 'W' || m[1] != 'D') | 
|  | drive->dev_flags |= IDE_DFLAG_DOORLOCKING; | 
|  | } | 
|  |  | 
|  | (void)set_addressing(drive, 1); | 
|  |  | 
|  | if (drive->dev_flags & IDE_DFLAG_LBA48) { | 
|  | int max_s = 2048; | 
|  |  | 
|  | if (max_s > hwif->rqsize) | 
|  | max_s = hwif->rqsize; | 
|  |  | 
|  | blk_queue_max_sectors(q, max_s); | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, | 
|  | queue_max_sectors(q) / 2); | 
|  |  | 
|  | if (ata_id_is_ssd(id)) | 
|  | queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q); | 
|  |  | 
|  | /* calculate drive capacity, and select LBA if possible */ | 
|  | ide_disk_get_capacity(drive); | 
|  |  | 
|  | /* | 
|  | * if possible, give fdisk access to more of the drive, | 
|  | * by correcting bios_cyls: | 
|  | */ | 
|  | capacity = ide_gd_capacity(drive); | 
|  |  | 
|  | if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) { | 
|  | if (ata_id_lba48_enabled(drive->id)) { | 
|  | /* compatibility */ | 
|  | drive->bios_sect = 63; | 
|  | drive->bios_head = 255; | 
|  | } | 
|  |  | 
|  | if (drive->bios_sect && drive->bios_head) { | 
|  | unsigned int cap0 = capacity; /* truncate to 32 bits */ | 
|  | unsigned int cylsz, cyl; | 
|  |  | 
|  | if (cap0 != capacity) | 
|  | drive->bios_cyl = 65535; | 
|  | else { | 
|  | cylsz = drive->bios_sect * drive->bios_head; | 
|  | cyl = cap0 / cylsz; | 
|  | if (cyl > 65535) | 
|  | cyl = 65535; | 
|  | if (cyl > drive->bios_cyl) | 
|  | drive->bios_cyl = cyl; | 
|  | } | 
|  | } | 
|  | } | 
|  | printk(KERN_INFO "%s: %llu sectors (%llu MB)", | 
|  | drive->name, capacity, sectors_to_MB(capacity)); | 
|  |  | 
|  | /* Only print cache size when it was specified */ | 
|  | if (id[ATA_ID_BUF_SIZE]) | 
|  | printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2); | 
|  |  | 
|  | printk(KERN_CONT ", CHS=%d/%d/%d\n", | 
|  | drive->bios_cyl, drive->bios_head, drive->bios_sect); | 
|  |  | 
|  | /* write cache enabled? */ | 
|  | if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id)) | 
|  | drive->dev_flags |= IDE_DFLAG_WCACHE; | 
|  |  | 
|  | set_wcache(drive, 1); | 
|  |  | 
|  | if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 && | 
|  | (drive->head == 0 || drive->head > 16)) { | 
|  | printk(KERN_ERR "%s: invalid geometry: %d physical heads?\n", | 
|  | drive->name, drive->head); | 
|  | drive->dev_flags &= ~IDE_DFLAG_ATTACH; | 
|  | } else | 
|  | drive->dev_flags |= IDE_DFLAG_ATTACH; | 
|  | } | 
|  |  | 
|  | static void ide_disk_flush(ide_drive_t *drive) | 
|  | { | 
|  | if (ata_id_flush_enabled(drive->id) == 0 || | 
|  | (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) | 
|  | return; | 
|  |  | 
|  | if (do_idedisk_flushcache(drive)) | 
|  | printk(KERN_INFO "%s: wcache flush failed!\n", drive->name); | 
|  | } | 
|  |  | 
|  | static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk, | 
|  | int on) | 
|  | { | 
|  | struct ide_cmd cmd; | 
|  | int ret; | 
|  |  | 
|  | if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0) | 
|  | return 0; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK; | 
|  | cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; | 
|  | cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE; | 
|  |  | 
|  | ret = ide_no_data_taskfile(drive, &cmd); | 
|  |  | 
|  | if (ret) | 
|  | drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | const struct ide_disk_ops ide_ata_disk_ops = { | 
|  | .check		= ide_disk_check, | 
|  | .set_capacity	= ide_disk_set_capacity, | 
|  | .get_capacity	= ide_disk_get_capacity, | 
|  | .setup		= ide_disk_setup, | 
|  | .flush		= ide_disk_flush, | 
|  | .init_media	= ide_disk_init_media, | 
|  | .set_doorlock	= ide_disk_set_doorlock, | 
|  | .do_request	= ide_do_rw_disk, | 
|  | .ioctl		= ide_disk_ioctl, | 
|  | }; |