usb: phy: ab8500-usb: drop link status delayed work
ab8500_usb_delayed_work was implemented as a workaroud for the internal
only and now unsupported v1.0 version of AB850. This patch removes the
delayed work and just leave a link status update call at probe time.
Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 90a3278..a1c103f 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -124,9 +124,7 @@
struct device *dev;
struct ab8500 *ab8500;
unsigned vbus_draw;
- struct delayed_work dwork;
struct work_struct phy_dis_work;
- unsigned long link_status_wait;
enum ab8500_usb_mode mode;
struct regulator *v_ape;
struct regulator *v_musb;
@@ -556,14 +554,6 @@
return IRQ_HANDLED;
}
-static void ab8500_usb_delayed_work(struct work_struct *work)
-{
- struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
- dwork.work);
-
- abx500_usb_link_status_update(ab);
-}
-
static void ab8500_usb_phy_disable_work(struct work_struct *work)
{
struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
@@ -635,12 +625,6 @@
} else {
otg->gadget = gadget;
otg->phy->state = OTG_STATE_B_IDLE;
-
- /* Phy will not be enabled if cable is already
- * plugged-in. Schedule to enable phy.
- * Use same delay to avoid any race condition.
- */
- schedule_delayed_work(&ab->dwork, ab->link_status_wait);
}
return 0;
@@ -665,11 +649,6 @@
schedule_work(&ab->phy_dis_work);
} else {
otg->host = host;
- /* Phy will not be enabled if cable is already
- * plugged-in. Schedule to enable phy.
- * Use same delay to avoid any race condition.
- */
- schedule_delayed_work(&ab->dwork, ab->link_status_wait);
}
return 0;
@@ -792,11 +771,6 @@
ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier);
- /* v1: Wait for link status to become stable.
- * all: Updates form set_host and set_peripheral as they are atomic.
- */
- INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work);
-
/* all: Disable phy when called from set_host and set_peripheral */
INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);
@@ -893,6 +867,8 @@
/* Needed to enable ID detection. */
ab8500_usb_wd_workaround(ab);
+ abx500_usb_link_status_update(ab);
+
dev_info(&pdev->dev, "revision 0x%2x driver initialized\n", rev);
return 0;
@@ -902,8 +878,6 @@
{
struct ab8500_usb *ab = platform_get_drvdata(pdev);
- cancel_delayed_work_sync(&ab->dwork);
-
cancel_work_sync(&ab->phy_dis_work);
usb_remove_phy(&ab->phy);