drivers/net: Move && and || to end of previous line
Only files where David Miller is the primary git-signer.
wireless, wimax, ixgbe, etc are not modified.
Compile tested x86 allyesconfig only
Not all files compiled (not x86 compatible)
Added a few > 80 column lines, which I ignored.
Existing checkpatch complaints ignored.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index ae6eab3..e8e33bb 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1124,11 +1124,11 @@
* The actual image starts after the "STMP" keyword
* so forward to the firmware header tag
*/
- for (i = 0; (fw->data[i] != STIR421X_PATCH_END_OF_HDR_TAG)
- && (i < fw->size); i++) ;
+ for (i = 0; (fw->data[i] != STIR421X_PATCH_END_OF_HDR_TAG) &&
+ (i < fw->size); i++) ;
/* here we check for the out of buffer case */
- if ((STIR421X_PATCH_END_OF_HDR_TAG == fw->data[i])
- && (i < STIR421X_PATCH_CODE_OFFSET)) {
+ if ((STIR421X_PATCH_END_OF_HDR_TAG == fw->data[i]) &&
+ (i < STIR421X_PATCH_CODE_OFFSET)) {
if (!memcmp(fw->data + i + 1, STIR421X_PATCH_STMP_TAG,
sizeof(STIR421X_PATCH_STMP_TAG) - 1)) {
diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c
index 528767d..e5698fa 100644
--- a/drivers/net/irda/stir4200.c
+++ b/drivers/net/irda/stir4200.c
@@ -612,16 +612,16 @@
pr_debug("fifo status 0x%lx count %lu\n", status, count);
/* is fifo receiving already, or empty */
- if (!(status & FIFOCTL_DIR)
- || (status & FIFOCTL_EMPTY))
+ if (!(status & FIFOCTL_DIR) ||
+ (status & FIFOCTL_EMPTY))
return 0;
if (signal_pending(current))
return -EINTR;
/* shutting down? */
- if (!netif_running(stir->netdev)
- || !netif_device_present(stir->netdev))
+ if (!netif_running(stir->netdev) ||
+ !netif_device_present(stir->netdev))
return -ESHUTDOWN;
/* only waiting for some space */
@@ -776,8 +776,8 @@
}
/* nothing to send? start receiving */
- if (!stir->receiving
- && irda_device_txqueue_empty(dev)) {
+ if (!stir->receiving &&
+ irda_device_txqueue_empty(dev)) {
/* Wait otherwise chip gets confused. */
if (fifo_txwait(stir, -1))
break;
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index a5ca71c..fddb4ef 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -1185,8 +1185,8 @@
* if frame size,data ptr,or skb ptr are wrong ,the get next
* entry.
*/
- if ((skb == NULL) || (skb->data == NULL)
- || (self->rx_buff.data == NULL) || (len < 6)) {
+ if ((skb == NULL) || (skb->data == NULL) ||
+ (self->rx_buff.data == NULL) || (len < 6)) {
self->netdev->stats.rx_dropped++;
return TRUE;
}
@@ -1284,8 +1284,8 @@
self->RetryCount++;
if ((self->RetryCount >= 1) ||
- ((st_fifo->pending_bytes + 2048) > self->rx_buff.truesize)
- || (st_fifo->len >= (MAX_RX_WINDOW))) {
+ ((st_fifo->pending_bytes + 2048) > self->rx_buff.truesize) ||
+ (st_fifo->len >= (MAX_RX_WINDOW))) {
while (st_fifo->len > 0) { //upload frame
// Put this entry back in fifo
if (st_fifo->head > MAX_RX_WINDOW)
@@ -1300,8 +1300,8 @@
* if frame size, data ptr, or skb ptr are wrong,
* then get next entry.
*/
- if ((skb == NULL) || (skb->data == NULL)
- || (self->rx_buff.data == NULL) || (len < 6)) {
+ if ((skb == NULL) || (skb->data == NULL) ||
+ (self->rx_buff.data == NULL) || (len < 6)) {
self->netdev->stats.rx_dropped++;
continue;
}
@@ -1332,8 +1332,8 @@
* if frame is receive complete at this routine ,then upload
* frame.
*/
- if ((GetRXStatus(iobase) & 0x10)
- && (RxCurCount(iobase, self) != self->RxLastCount)) {
+ if ((GetRXStatus(iobase) & 0x10) &&
+ (RxCurCount(iobase, self) != self->RxLastCount)) {
upload_rxdata(self, iobase);
if (irda_device_txqueue_empty(self->netdev))
via_ircc_dma_receive(self);
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index 7cfb8b6..bd3c6b5 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -431,8 +431,8 @@
memset(rd, 0, sizeof(*rd));
rd->hw = hwmap + i;
rd->buf = kmalloc(len, GFP_KERNEL|GFP_DMA);
- if (rd->buf == NULL
- || !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) {
+ if (rd->buf == NULL ||
+ !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) {
if (rd->buf) {
IRDA_ERROR("%s: failed to create PCI-MAP for %p",
__func__, rd->buf);
@@ -955,8 +955,8 @@
}
for(;;) {
do_gettimeofday(&now);
- if (now.tv_sec > ready.tv_sec
- || (now.tv_sec==ready.tv_sec && now.tv_usec>=ready.tv_usec))
+ if (now.tv_sec > ready.tv_sec ||
+ (now.tv_sec==ready.tv_sec && now.tv_usec>=ready.tv_usec))
break;
udelay(100);
/* must not sleep here - called under netif_tx_lock! */
@@ -1594,8 +1594,8 @@
* see include file for details why we need these 2 masks, in this order!
*/
- if (pci_set_dma_mask(pdev,DMA_MASK_USED_BY_HW)
- || pci_set_dma_mask(pdev,DMA_MASK_MSTRPAGE)) {
+ if (pci_set_dma_mask(pdev,DMA_MASK_USED_BY_HW) ||
+ pci_set_dma_mask(pdev,DMA_MASK_MSTRPAGE)) {
IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __func__);
return -1;
}
@@ -1641,8 +1641,8 @@
IRDA_MESSAGE("%s: IrDA PCI controller %s detected\n",
drivername, pci_name(pdev));
- if ( !pci_resource_start(pdev,0)
- || !(pci_resource_flags(pdev,0) & IORESOURCE_IO) ) {
+ if ( !pci_resource_start(pdev,0) ||
+ !(pci_resource_flags(pdev,0) & IORESOURCE_IO) ) {
IRDA_ERROR("%s: bar 0 invalid", __func__);
goto out_disable;
}