[POWERPC] mpc5200: Fix FEC error handling on FIFO errors
The error handling for the mpc5200 fec interrupt is broken. The intended
behaviour is like this:
* If one of FEC_IEVENT_RFIFO_ERROR and FEC_IEVENT_XFIFO_ERROR happens,
the datasheet says (MPC5200B User's Guide R1.2, p. 14-13): "When this
occurs, software must ensure both the FIFO Controller and BestComm are
soft-reset".
* On any other error (non-TFINT) interrupt, just issue a debug message.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index e5e6352..d21b7ab 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -491,20 +491,23 @@
out_be32(&fec->ievent, ievent); /* clear pending events */
- if (ievent & ~(FEC_IEVENT_RFIFO_ERROR | FEC_IEVENT_XFIFO_ERROR)) {
- if (ievent & ~FEC_IEVENT_TFINT)
- dev_dbg(&dev->dev, "ievent: %08x\n", ievent);
+ /* on fifo error, soft-reset fec */
+ if (ievent & (FEC_IEVENT_RFIFO_ERROR | FEC_IEVENT_XFIFO_ERROR)) {
+
+ if (net_ratelimit() && (ievent & FEC_IEVENT_RFIFO_ERROR))
+ dev_warn(&dev->dev, "FEC_IEVENT_RFIFO_ERROR\n");
+ if (net_ratelimit() && (ievent & FEC_IEVENT_XFIFO_ERROR))
+ dev_warn(&dev->dev, "FEC_IEVENT_XFIFO_ERROR\n");
+
+ mpc52xx_fec_reset(dev);
+
+ netif_wake_queue(dev);
return IRQ_HANDLED;
}
- if (net_ratelimit() && (ievent & FEC_IEVENT_RFIFO_ERROR))
- dev_warn(&dev->dev, "FEC_IEVENT_RFIFO_ERROR\n");
- if (net_ratelimit() && (ievent & FEC_IEVENT_XFIFO_ERROR))
- dev_warn(&dev->dev, "FEC_IEVENT_XFIFO_ERROR\n");
+ if (ievent & ~FEC_IEVENT_TFINT)
+ dev_dbg(&dev->dev, "ievent: %08x\n", ievent);
- mpc52xx_fec_reset(dev);
-
- netif_wake_queue(dev);
return IRQ_HANDLED;
}