atl1c: Add AR8151 v2 support and change L0s/L1 routine
Add AR8151 v2.0 Gigabit 1000 support
Change jumbo frame size to 6K
Update L0s/L1 rountine
when link speed is 100M or 1G, set L1 link timer to 4 for l1d_2 and l2c_b2
set L1 link timer to 7 for l2c_b, set L1 link timer to 0xF for others.
Update atl1c_suspend routine
just refactory the function, add atl1c_phy_power_saving routine,
when Wake On Lan enable, this func will be called to save power,
it will reautoneg PHY to 10/100M speed depend on the link
partners link capability.
Update atl1c_configure_des_ring
do not use l2c_b default SRAM configuration.
Signed-off-by: Jie Yang <Jie.Yang@atheros.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/atl1c/atl1c_hw.c b/drivers/net/atl1c/atl1c_hw.c
index f1389d6..d8501f0 100644
--- a/drivers/net/atl1c/atl1c_hw.c
+++ b/drivers/net/atl1c/atl1c_hw.c
@@ -37,6 +37,9 @@
if (data & TWSI_DEBUG_DEV_EXIST)
return 1;
+ AT_READ_REG(hw, REG_MASTER_CTRL, &data);
+ if (data & MASTER_CTRL_OTP_SEL)
+ return 1;
return 0;
}
@@ -69,6 +72,8 @@
u32 i;
u32 otp_ctrl_data;
u32 twsi_ctrl_data;
+ u32 ltssm_ctrl_data;
+ u32 wol_data;
u8 eth_addr[ETH_ALEN];
u16 phy_data;
bool raise_vol = false;
@@ -104,6 +109,15 @@
udelay(20);
raise_vol = true;
}
+ /* close open bit of ReadOnly*/
+ AT_READ_REG(hw, REG_LTSSM_ID_CTRL, <ssm_ctrl_data);
+ ltssm_ctrl_data &= ~LTSSM_ID_EN_WRO;
+ AT_WRITE_REG(hw, REG_LTSSM_ID_CTRL, ltssm_ctrl_data);
+
+ /* clear any WOL settings */
+ AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
+ AT_READ_REG(hw, REG_WOL_CTRL, &wol_data);
+
AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data);
twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART;
@@ -119,17 +133,15 @@
}
/* Disable OTP_CLK */
if ((hw->nic_type == athr_l1c || hw->nic_type == athr_l2c)) {
- if (otp_ctrl_data & OTP_CTRL_CLK_EN) {
- otp_ctrl_data &= ~OTP_CTRL_CLK_EN;
- AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
- AT_WRITE_FLUSH(hw);
- msleep(1);
- }
+ otp_ctrl_data &= ~OTP_CTRL_CLK_EN;
+ AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
+ msleep(1);
}
if (raise_vol) {
if (hw->nic_type == athr_l2c_b ||
hw->nic_type == athr_l2c_b2 ||
- hw->nic_type == athr_l1d) {
+ hw->nic_type == athr_l1d ||
+ hw->nic_type == athr_l1d_2) {
atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x00);
if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data))
goto out;
@@ -456,14 +468,22 @@
if (hw->nic_type == athr_l2c_b ||
hw->nic_type == athr_l2c_b2 ||
- hw->nic_type == athr_l1d) {
+ hw->nic_type == athr_l1d ||
+ hw->nic_type == athr_l1d_2) {
atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x3B);
atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data);
atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data & 0xFFF7);
msleep(20);
}
-
- /*Enable PHY LinkChange Interrupt */
+ if (hw->nic_type == athr_l1d) {
+ atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x29);
+ atl1c_write_phy_reg(hw, MII_DBG_DATA, 0x929D);
+ }
+ if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b2
+ || hw->nic_type == athr_l2c || hw->nic_type == athr_l2c) {
+ atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x29);
+ atl1c_write_phy_reg(hw, MII_DBG_DATA, 0xB6DD);
+ }
err = atl1c_write_phy_reg(hw, MII_IER, mii_ier_data);
if (err) {
if (netif_msg_hw(adapter))
@@ -482,12 +502,10 @@
struct pci_dev *pdev = adapter->pdev;
int ret_val;
u16 mii_bmcr_data = BMCR_RESET;
- u16 phy_id1, phy_id2;
- if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &phy_id1) != 0) ||
- (atl1c_read_phy_reg(hw, MII_PHYSID2, &phy_id2) != 0)) {
- if (netif_msg_link(adapter))
- dev_err(&pdev->dev, "Error get phy ID\n");
+ if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &hw->phy_id1) != 0) ||
+ (atl1c_read_phy_reg(hw, MII_PHYSID2, &hw->phy_id2) != 0)) {
+ dev_err(&pdev->dev, "Error get phy ID\n");
return -1;
}
switch (hw->media_type) {
@@ -572,6 +590,65 @@
return 0;
}
+int atl1c_phy_power_saving(struct atl1c_hw *hw)
+{
+ struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter;
+ struct pci_dev *pdev = adapter->pdev;
+ int ret = 0;
+ u16 autoneg_advertised = ADVERTISED_10baseT_Half;
+ u16 save_autoneg_advertised;
+ u16 phy_data;
+ u16 mii_lpa_data;
+ u16 speed = SPEED_0;
+ u16 duplex = FULL_DUPLEX;
+ int i;
+
+ atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
+ atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
+ if (phy_data & BMSR_LSTATUS) {
+ atl1c_read_phy_reg(hw, MII_LPA, &mii_lpa_data);
+ if (mii_lpa_data & LPA_10FULL)
+ autoneg_advertised = ADVERTISED_10baseT_Full;
+ else if (mii_lpa_data & LPA_10HALF)
+ autoneg_advertised = ADVERTISED_10baseT_Half;
+ else if (mii_lpa_data & LPA_100HALF)
+ autoneg_advertised = ADVERTISED_100baseT_Half;
+ else if (mii_lpa_data & LPA_100FULL)
+ autoneg_advertised = ADVERTISED_100baseT_Full;
+
+ save_autoneg_advertised = hw->autoneg_advertised;
+ hw->phy_configured = false;
+ hw->autoneg_advertised = autoneg_advertised;
+ if (atl1c_restart_autoneg(hw) != 0) {
+ dev_dbg(&pdev->dev, "phy autoneg failed\n");
+ ret = -1;
+ }
+ hw->autoneg_advertised = save_autoneg_advertised;
+
+ if (mii_lpa_data) {
+ for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) {
+ mdelay(100);
+ atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
+ atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
+ if (phy_data & BMSR_LSTATUS) {
+ if (atl1c_get_speed_and_duplex(hw, &speed,
+ &duplex) != 0)
+ dev_dbg(&pdev->dev,
+ "get speed and duplex failed\n");
+ break;
+ }
+ }
+ }
+ } else {
+ speed = SPEED_10;
+ duplex = HALF_DUPLEX;
+ }
+ adapter->link_speed = speed;
+ adapter->link_duplex = duplex;
+
+ return ret;
+}
+
int atl1c_restart_autoneg(struct atl1c_hw *hw)
{
int err = 0;