sfc: Remove support for SFN4111T, SFT9001 and Falcon GMAC
SFN4111T never reached production and is not being used for internal
or customer testing.
Since we have no production Falcon boards using the SFT9001 or the
GMAC, remove support for them as well.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index eeaf0bd..98d9460 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -286,46 +286,24 @@
*/
void efx_mdio_an_reconfigure(struct efx_nic *efx)
{
- bool xnp = (efx->link_advertising & ADVERTISED_10000baseT_Full
- || EFX_WORKAROUND_13204(efx));
int reg;
WARN_ON(!(efx->mdio.mmds & MDIO_DEVS_AN));
/* Set up the base page */
- reg = ADVERTISE_CSMA;
- if (efx->link_advertising & ADVERTISED_10baseT_Half)
- reg |= ADVERTISE_10HALF;
- if (efx->link_advertising & ADVERTISED_10baseT_Full)
- reg |= ADVERTISE_10FULL;
- if (efx->link_advertising & ADVERTISED_100baseT_Half)
- reg |= ADVERTISE_100HALF;
- if (efx->link_advertising & ADVERTISED_100baseT_Full)
- reg |= ADVERTISE_100FULL;
- if (xnp)
- reg |= ADVERTISE_RESV;
- else if (efx->link_advertising & (ADVERTISED_1000baseT_Half |
- ADVERTISED_1000baseT_Full))
- reg |= ADVERTISE_NPAGE;
+ reg = ADVERTISE_CSMA | ADVERTISE_RESV;
if (efx->link_advertising & ADVERTISED_Pause)
reg |= ADVERTISE_PAUSE_CAP;
if (efx->link_advertising & ADVERTISED_Asym_Pause)
reg |= ADVERTISE_PAUSE_ASYM;
efx_mdio_write(efx, MDIO_MMD_AN, MDIO_AN_ADVERTISE, reg);
- /* Set up the (extended) next page if necessary */
- if (efx->phy_op->set_npage_adv)
- efx->phy_op->set_npage_adv(efx, efx->link_advertising);
+ /* Set up the (extended) next page */
+ efx->phy_op->set_npage_adv(efx, efx->link_advertising);
/* Enable and restart AN */
reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_CTRL1);
- reg |= MDIO_AN_CTRL1_ENABLE;
- if (!(EFX_WORKAROUND_15195(efx) && LOOPBACK_EXTERNAL(efx)))
- reg |= MDIO_AN_CTRL1_RESTART;
- if (xnp)
- reg |= MDIO_AN_CTRL1_XNP;
- else
- reg &= ~MDIO_AN_CTRL1_XNP;
+ reg |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART | MDIO_AN_CTRL1_XNP;
efx_mdio_write(efx, MDIO_MMD_AN, MDIO_CTRL1, reg);
}