|  | /* | 
|  | * fam15h_power.c - AMD Family 15h processor power monitoring | 
|  | * | 
|  | * Copyright (c) 2011 Advanced Micro Devices, Inc. | 
|  | * Author: Andreas Herrmann <andreas.herrmann3@amd.com> | 
|  | * | 
|  | * | 
|  | * This driver is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License; either | 
|  | * version 2 of the License, or (at your option) any later version. | 
|  | * | 
|  | * This driver is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. | 
|  | * See the GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this driver; if not, see <http://www.gnu.org/licenses/>. | 
|  | */ | 
|  |  | 
|  | #include <linux/err.h> | 
|  | #include <linux/hwmon.h> | 
|  | #include <linux/hwmon-sysfs.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <asm/processor.h> | 
|  |  | 
|  | MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor"); | 
|  | MODULE_AUTHOR("Andreas Herrmann <andreas.herrmann3@amd.com>"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | /* D18F3 */ | 
|  | #define REG_NORTHBRIDGE_CAP		0xe8 | 
|  |  | 
|  | /* D18F4 */ | 
|  | #define REG_PROCESSOR_TDP		0x1b8 | 
|  |  | 
|  | /* D18F5 */ | 
|  | #define REG_TDP_RUNNING_AVERAGE		0xe0 | 
|  | #define REG_TDP_LIMIT3			0xe8 | 
|  |  | 
|  | struct fam15h_power_data { | 
|  | struct device *hwmon_dev; | 
|  | unsigned int tdp_to_watts; | 
|  | unsigned int base_tdp; | 
|  | unsigned int processor_pwr_watts; | 
|  | }; | 
|  |  | 
|  | static ssize_t show_power(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | u32 val, tdp_limit, running_avg_range; | 
|  | s32 running_avg_capture; | 
|  | u64 curr_pwr_watts; | 
|  | struct pci_dev *f4 = to_pci_dev(dev); | 
|  | struct fam15h_power_data *data = dev_get_drvdata(dev); | 
|  |  | 
|  | pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5), | 
|  | REG_TDP_RUNNING_AVERAGE, &val); | 
|  | running_avg_capture = (val >> 4) & 0x3fffff; | 
|  | running_avg_capture = sign_extend32(running_avg_capture, 21); | 
|  | running_avg_range = (val & 0xf) + 1; | 
|  |  | 
|  | pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5), | 
|  | REG_TDP_LIMIT3, &val); | 
|  |  | 
|  | tdp_limit = val >> 16; | 
|  | curr_pwr_watts = ((u64)(tdp_limit + | 
|  | data->base_tdp)) << running_avg_range; | 
|  | curr_pwr_watts -= running_avg_capture; | 
|  | curr_pwr_watts *= data->tdp_to_watts; | 
|  |  | 
|  | /* | 
|  | * Convert to microWatt | 
|  | * | 
|  | * power is in Watt provided as fixed point integer with | 
|  | * scaling factor 1/(2^16).  For conversion we use | 
|  | * (10^6)/(2^16) = 15625/(2^10) | 
|  | */ | 
|  | curr_pwr_watts = (curr_pwr_watts * 15625) >> (10 + running_avg_range); | 
|  | return sprintf(buf, "%u\n", (unsigned int) curr_pwr_watts); | 
|  | } | 
|  | static DEVICE_ATTR(power1_input, S_IRUGO, show_power, NULL); | 
|  |  | 
|  | static ssize_t show_power_crit(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct fam15h_power_data *data = dev_get_drvdata(dev); | 
|  |  | 
|  | return sprintf(buf, "%u\n", data->processor_pwr_watts); | 
|  | } | 
|  | static DEVICE_ATTR(power1_crit, S_IRUGO, show_power_crit, NULL); | 
|  |  | 
|  | static ssize_t show_name(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | return sprintf(buf, "fam15h_power\n"); | 
|  | } | 
|  | static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); | 
|  |  | 
|  | static struct attribute *fam15h_power_attrs[] = { | 
|  | &dev_attr_power1_input.attr, | 
|  | &dev_attr_power1_crit.attr, | 
|  | &dev_attr_name.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group fam15h_power_attr_group = { | 
|  | .attrs	= fam15h_power_attrs, | 
|  | }; | 
|  |  | 
|  | static bool __devinit fam15h_power_is_internal_node0(struct pci_dev *f4) | 
|  | { | 
|  | u32 val; | 
|  |  | 
|  | pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 3), | 
|  | REG_NORTHBRIDGE_CAP, &val); | 
|  | if ((val & BIT(29)) && ((val >> 30) & 3)) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Newer BKDG versions have an updated recommendation on how to properly | 
|  | * initialize the running average range (was: 0xE, now: 0x9). This avoids | 
|  | * counter saturations resulting in bogus power readings. | 
|  | * We correct this value ourselves to cope with older BIOSes. | 
|  | */ | 
|  | static const struct pci_device_id affected_device[] = { | 
|  | { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }, | 
|  | { 0 } | 
|  | }; | 
|  |  | 
|  | static void tweak_runavg_range(struct pci_dev *pdev) | 
|  | { | 
|  | u32 val; | 
|  |  | 
|  | /* | 
|  | * let this quirk apply only to the current version of the | 
|  | * northbridge, since future versions may change the behavior | 
|  | */ | 
|  | if (!pci_match_id(affected_device, pdev)) | 
|  | return; | 
|  |  | 
|  | pci_bus_read_config_dword(pdev->bus, | 
|  | PCI_DEVFN(PCI_SLOT(pdev->devfn), 5), | 
|  | REG_TDP_RUNNING_AVERAGE, &val); | 
|  | if ((val & 0xf) != 0xe) | 
|  | return; | 
|  |  | 
|  | val &= ~0xf; | 
|  | val |=  0x9; | 
|  | pci_bus_write_config_dword(pdev->bus, | 
|  | PCI_DEVFN(PCI_SLOT(pdev->devfn), 5), | 
|  | REG_TDP_RUNNING_AVERAGE, val); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int fam15h_power_resume(struct pci_dev *pdev) | 
|  | { | 
|  | tweak_runavg_range(pdev); | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define fam15h_power_resume NULL | 
|  | #endif | 
|  |  | 
|  | static void __devinit fam15h_power_init_data(struct pci_dev *f4, | 
|  | struct fam15h_power_data *data) | 
|  | { | 
|  | u32 val; | 
|  | u64 tmp; | 
|  |  | 
|  | pci_read_config_dword(f4, REG_PROCESSOR_TDP, &val); | 
|  | data->base_tdp = val >> 16; | 
|  | tmp = val & 0xffff; | 
|  |  | 
|  | pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5), | 
|  | REG_TDP_LIMIT3, &val); | 
|  |  | 
|  | data->tdp_to_watts = ((val & 0x3ff) << 6) | ((val >> 10) & 0x3f); | 
|  | tmp *= data->tdp_to_watts; | 
|  |  | 
|  | /* result not allowed to be >= 256W */ | 
|  | if ((tmp >> 16) >= 256) | 
|  | dev_warn(&f4->dev, "Bogus value for ProcessorPwrWatts " | 
|  | "(processor_pwr_watts>=%u)\n", | 
|  | (unsigned int) (tmp >> 16)); | 
|  |  | 
|  | /* convert to microWatt */ | 
|  | data->processor_pwr_watts = (tmp * 15625) >> 10; | 
|  | } | 
|  |  | 
|  | static int __devinit fam15h_power_probe(struct pci_dev *pdev, | 
|  | const struct pci_device_id *id) | 
|  | { | 
|  | struct fam15h_power_data *data; | 
|  | struct device *dev = &pdev->dev; | 
|  | int err; | 
|  |  | 
|  | /* | 
|  | * though we ignore every other northbridge, we still have to | 
|  | * do the tweaking on _each_ node in MCM processors as the counters | 
|  | * are working hand-in-hand | 
|  | */ | 
|  | tweak_runavg_range(pdev); | 
|  |  | 
|  | if (!fam15h_power_is_internal_node0(pdev)) | 
|  | return -ENODEV; | 
|  |  | 
|  | data = devm_kzalloc(dev, sizeof(struct fam15h_power_data), GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | fam15h_power_init_data(pdev, data); | 
|  |  | 
|  | dev_set_drvdata(dev, data); | 
|  | err = sysfs_create_group(&dev->kobj, &fam15h_power_attr_group); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | data->hwmon_dev = hwmon_device_register(dev); | 
|  | if (IS_ERR(data->hwmon_dev)) { | 
|  | err = PTR_ERR(data->hwmon_dev); | 
|  | goto exit_remove_group; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit_remove_group: | 
|  | sysfs_remove_group(&dev->kobj, &fam15h_power_attr_group); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void __devexit fam15h_power_remove(struct pci_dev *pdev) | 
|  | { | 
|  | struct device *dev; | 
|  | struct fam15h_power_data *data; | 
|  |  | 
|  | dev = &pdev->dev; | 
|  | data = dev_get_drvdata(dev); | 
|  | hwmon_device_unregister(data->hwmon_dev); | 
|  | sysfs_remove_group(&dev->kobj, &fam15h_power_attr_group); | 
|  | } | 
|  |  | 
|  | static DEFINE_PCI_DEVICE_TABLE(fam15h_power_id_table) = { | 
|  | { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pci, fam15h_power_id_table); | 
|  |  | 
|  | static struct pci_driver fam15h_power_driver = { | 
|  | .name = "fam15h_power", | 
|  | .id_table = fam15h_power_id_table, | 
|  | .probe = fam15h_power_probe, | 
|  | .remove = __devexit_p(fam15h_power_remove), | 
|  | .resume = fam15h_power_resume, | 
|  | }; | 
|  |  | 
|  | module_pci_driver(fam15h_power_driver); |