| /* | 
 |  *  PowerPC version | 
 |  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) | 
 |  * | 
 |  *  Derived from "arch/i386/mm/fault.c" | 
 |  *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds | 
 |  * | 
 |  *  Modified by Cort Dougan and Paul Mackerras. | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or | 
 |  *  modify it under the terms of the GNU General Public License | 
 |  *  as published by the Free Software Foundation; either version | 
 |  *  2 of the License, or (at your option) any later version. | 
 |  */ | 
 |  | 
 | #include <linux/signal.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/string.h> | 
 | #include <linux/types.h> | 
 | #include <linux/ptrace.h> | 
 | #include <linux/mman.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/highmem.h> | 
 | #include <linux/module.h> | 
 |  | 
 | #include <asm/page.h> | 
 | #include <asm/pgtable.h> | 
 | #include <asm/mmu.h> | 
 | #include <asm/mmu_context.h> | 
 | #include <asm/system.h> | 
 | #include <asm/uaccess.h> | 
 | #include <asm/tlbflush.h> | 
 |  | 
 | #if defined(CONFIG_XMON) || defined(CONFIG_KGDB) | 
 | extern void (*debugger)(struct pt_regs *); | 
 | extern void (*debugger_fault_handler)(struct pt_regs *); | 
 | extern int (*debugger_dabr_match)(struct pt_regs *); | 
 | int debugger_kernel_faults = 1; | 
 | #endif | 
 |  | 
 | unsigned long htab_reloads;	/* updated by hashtable.S:hash_page() */ | 
 | unsigned long htab_evicts; 	/* updated by hashtable.S:hash_page() */ | 
 | unsigned long htab_preloads;	/* updated by hashtable.S:add_hash_page() */ | 
 | unsigned long pte_misses;	/* updated by do_page_fault() */ | 
 | unsigned long pte_errors;	/* updated by do_page_fault() */ | 
 | unsigned int probingmem; | 
 |  | 
 | /* | 
 |  * Check whether the instruction at regs->nip is a store using | 
 |  * an update addressing form which will update r1. | 
 |  */ | 
 | static int store_updates_sp(struct pt_regs *regs) | 
 | { | 
 | 	unsigned int inst; | 
 |  | 
 | 	if (get_user(inst, (unsigned int __user *)regs->nip)) | 
 | 		return 0; | 
 | 	/* check for 1 in the rA field */ | 
 | 	if (((inst >> 16) & 0x1f) != 1) | 
 | 		return 0; | 
 | 	/* check major opcode */ | 
 | 	switch (inst >> 26) { | 
 | 	case 37:	/* stwu */ | 
 | 	case 39:	/* stbu */ | 
 | 	case 45:	/* sthu */ | 
 | 	case 53:	/* stfsu */ | 
 | 	case 55:	/* stfdu */ | 
 | 		return 1; | 
 | 	case 31: | 
 | 		/* check minor opcode */ | 
 | 		switch ((inst >> 1) & 0x3ff) { | 
 | 		case 183:	/* stwux */ | 
 | 		case 247:	/* stbux */ | 
 | 		case 439:	/* sthux */ | 
 | 		case 695:	/* stfsux */ | 
 | 		case 759:	/* stfdux */ | 
 | 			return 1; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * For 600- and 800-family processors, the error_code parameter is DSISR | 
 |  * for a data fault, SRR1 for an instruction fault. For 400-family processors | 
 |  * the error_code parameter is ESR for a data fault, 0 for an instruction | 
 |  * fault. | 
 |  */ | 
 | int do_page_fault(struct pt_regs *regs, unsigned long address, | 
 | 		  unsigned long error_code) | 
 | { | 
 | 	struct vm_area_struct * vma; | 
 | 	struct mm_struct *mm = current->mm; | 
 | 	siginfo_t info; | 
 | 	int code = SEGV_MAPERR; | 
 | 	int fault; | 
 | #if defined(CONFIG_4xx) || defined (CONFIG_BOOKE) | 
 | 	int is_write = error_code & ESR_DST; | 
 | #else | 
 | 	int is_write = 0; | 
 |  | 
 | 	/* | 
 | 	 * Fortunately the bit assignments in SRR1 for an instruction | 
 | 	 * fault and DSISR for a data fault are mostly the same for the | 
 | 	 * bits we are interested in.  But there are some bits which | 
 | 	 * indicate errors in DSISR but can validly be set in SRR1. | 
 | 	 */ | 
 | 	if (TRAP(regs) == 0x400) | 
 | 		error_code &= 0x48200000; | 
 | 	else | 
 | 		is_write = error_code & 0x02000000; | 
 | #endif /* CONFIG_4xx || CONFIG_BOOKE */ | 
 |  | 
 | #if defined(CONFIG_XMON) || defined(CONFIG_KGDB) | 
 | 	if (debugger_fault_handler && TRAP(regs) == 0x300) { | 
 | 		debugger_fault_handler(regs); | 
 | 		return 0; | 
 | 	} | 
 | #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) | 
 | 	if (error_code & 0x00400000) { | 
 | 		/* DABR match */ | 
 | 		if (debugger_dabr_match(regs)) | 
 | 			return 0; | 
 | 	} | 
 | #endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/ | 
 | #endif /* CONFIG_XMON || CONFIG_KGDB */ | 
 |  | 
 | 	if (in_atomic() || mm == NULL) | 
 | 		return SIGSEGV; | 
 |  | 
 | 	down_read(&mm->mmap_sem); | 
 | 	vma = find_vma(mm, address); | 
 | 	if (!vma) | 
 | 		goto bad_area; | 
 | 	if (vma->vm_start <= address) | 
 | 		goto good_area; | 
 | 	if (!(vma->vm_flags & VM_GROWSDOWN)) | 
 | 		goto bad_area; | 
 | 	if (!is_write) | 
 |                 goto bad_area; | 
 |  | 
 | 	/* | 
 | 	 * N.B. The rs6000/xcoff ABI allows programs to access up to | 
 | 	 * a few hundred bytes below the stack pointer. | 
 | 	 * The kernel signal delivery code writes up to about 1.5kB | 
 | 	 * below the stack pointer (r1) before decrementing it. | 
 | 	 * The exec code can write slightly over 640kB to the stack | 
 | 	 * before setting the user r1.  Thus we allow the stack to | 
 | 	 * expand to 1MB without further checks. | 
 | 	 */ | 
 | 	if (address + 0x100000 < vma->vm_end) { | 
 | 		/* get user regs even if this fault is in kernel mode */ | 
 | 		struct pt_regs *uregs = current->thread.regs; | 
 | 		if (uregs == NULL) | 
 | 			goto bad_area; | 
 |  | 
 | 		/* | 
 | 		 * A user-mode access to an address a long way below | 
 | 		 * the stack pointer is only valid if the instruction | 
 | 		 * is one which would update the stack pointer to the | 
 | 		 * address accessed if the instruction completed, | 
 | 		 * i.e. either stwu rs,n(r1) or stwux rs,r1,rb | 
 | 		 * (or the byte, halfword, float or double forms). | 
 | 		 * | 
 | 		 * If we don't check this then any write to the area | 
 | 		 * between the last mapped region and the stack will | 
 | 		 * expand the stack rather than segfaulting. | 
 | 		 */ | 
 | 		if (address + 2048 < uregs->gpr[1] | 
 | 		    && (!user_mode(regs) || !store_updates_sp(regs))) | 
 | 			goto bad_area; | 
 | 	} | 
 | 	if (expand_stack(vma, address)) | 
 | 		goto bad_area; | 
 |  | 
 | good_area: | 
 | 	code = SEGV_ACCERR; | 
 | #if defined(CONFIG_6xx) | 
 | 	if (error_code & 0x95700000) | 
 | 		/* an error such as lwarx to I/O controller space, | 
 | 		   address matching DABR, eciwx, etc. */ | 
 | 		goto bad_area; | 
 | #endif /* CONFIG_6xx */ | 
 | #if defined(CONFIG_8xx) | 
 |         /* The MPC8xx seems to always set 0x80000000, which is | 
 |          * "undefined".  Of those that can be set, this is the only | 
 |          * one which seems bad. | 
 |          */ | 
 | 	if (error_code & 0x10000000) | 
 |                 /* Guarded storage error. */ | 
 | 		goto bad_area; | 
 | #endif /* CONFIG_8xx */ | 
 |  | 
 | 	/* a write */ | 
 | 	if (is_write) { | 
 | 		if (!(vma->vm_flags & VM_WRITE)) | 
 | 			goto bad_area; | 
 | #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) | 
 | 	/* an exec  - 4xx/Book-E allows for per-page execute permission */ | 
 | 	} else if (TRAP(regs) == 0x400) { | 
 | 		pte_t *ptep; | 
 | 		pmd_t *pmdp; | 
 |  | 
 | #if 0 | 
 | 		/* It would be nice to actually enforce the VM execute | 
 | 		   permission on CPUs which can do so, but far too | 
 | 		   much stuff in userspace doesn't get the permissions | 
 | 		   right, so we let any page be executed for now. */ | 
 | 		if (! (vma->vm_flags & VM_EXEC)) | 
 | 			goto bad_area; | 
 | #endif | 
 |  | 
 | 		/* Since 4xx/Book-E supports per-page execute permission, | 
 | 		 * we lazily flush dcache to icache. */ | 
 | 		ptep = NULL; | 
 | 		if (get_pteptr(mm, address, &ptep, &pmdp)) { | 
 | 			spinlock_t *ptl = pte_lockptr(mm, pmdp); | 
 | 			spin_lock(ptl); | 
 | 			if (pte_present(*ptep)) { | 
 | 				struct page *page = pte_page(*ptep); | 
 |  | 
 | 				if (!test_bit(PG_arch_1, &page->flags)) { | 
 | 					flush_dcache_icache_page(page); | 
 | 					set_bit(PG_arch_1, &page->flags); | 
 | 				} | 
 | 				pte_update(ptep, 0, _PAGE_HWEXEC); | 
 | 				_tlbie(address, mm->context.id); | 
 | 				pte_unmap_unlock(ptep, ptl); | 
 | 				up_read(&mm->mmap_sem); | 
 | 				return 0; | 
 | 			} | 
 | 			pte_unmap_unlock(ptep, ptl); | 
 | 		} | 
 | #endif | 
 | 	/* a read */ | 
 | 	} else { | 
 | 		/* protection fault */ | 
 | 		if (error_code & 0x08000000) | 
 | 			goto bad_area; | 
 | 		if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) | 
 | 			goto bad_area; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If for any reason at all we couldn't handle the fault, | 
 | 	 * make sure we exit gracefully rather than endlessly redo | 
 | 	 * the fault. | 
 | 	 */ | 
 |  survive: | 
 | 	fault = handle_mm_fault(mm, vma, address, is_write); | 
 | 	if (unlikely(fault & VM_FAULT_ERROR)) { | 
 | 		if (fault & VM_FAULT_OOM) | 
 | 			goto out_of_memory; | 
 | 		else if (fault & VM_FAULT_SIGBUS) | 
 | 			goto do_sigbus; | 
 | 		BUG(); | 
 | 	} | 
 | 	if (fault & VM_FAULT_MAJOR) | 
 | 		current->maj_flt++; | 
 | 	else | 
 | 		current->min_flt++; | 
 |  | 
 | 	up_read(&mm->mmap_sem); | 
 | 	/* | 
 | 	 * keep track of tlb+htab misses that are good addrs but | 
 | 	 * just need pte's created via handle_mm_fault() | 
 | 	 * -- Cort | 
 | 	 */ | 
 | 	pte_misses++; | 
 | 	return 0; | 
 |  | 
 | bad_area: | 
 | 	up_read(&mm->mmap_sem); | 
 | 	pte_errors++; | 
 |  | 
 | 	/* User mode accesses cause a SIGSEGV */ | 
 | 	if (user_mode(regs)) { | 
 | 		_exception(SIGSEGV, regs, code, address); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return SIGSEGV; | 
 |  | 
 | /* | 
 |  * We ran out of memory, or some other thing happened to us that made | 
 |  * us unable to handle the page fault gracefully. | 
 |  */ | 
 | out_of_memory: | 
 | 	up_read(&mm->mmap_sem); | 
 | 	if (is_global_init(current)) { | 
 | 		yield(); | 
 | 		down_read(&mm->mmap_sem); | 
 | 		goto survive; | 
 | 	} | 
 | 	printk("VM: killing process %s\n", current->comm); | 
 | 	if (user_mode(regs)) | 
 | 		do_group_exit(SIGKILL); | 
 | 	return SIGKILL; | 
 |  | 
 | do_sigbus: | 
 | 	up_read(&mm->mmap_sem); | 
 | 	info.si_signo = SIGBUS; | 
 | 	info.si_errno = 0; | 
 | 	info.si_code = BUS_ADRERR; | 
 | 	info.si_addr = (void __user *)address; | 
 | 	force_sig_info (SIGBUS, &info, current); | 
 | 	if (!user_mode(regs)) | 
 | 		return SIGBUS; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * bad_page_fault is called when we have a bad access from the kernel. | 
 |  * It is called from the DSI and ISI handlers in head.S and from some | 
 |  * of the procedures in traps.c. | 
 |  */ | 
 | void | 
 | bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) | 
 | { | 
 | 	const struct exception_table_entry *entry; | 
 |  | 
 | 	/* Are we prepared to handle this fault?  */ | 
 | 	if ((entry = search_exception_tables(regs->nip)) != NULL) { | 
 | 		regs->nip = entry->fixup; | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* kernel has accessed a bad area */ | 
 | #if defined(CONFIG_XMON) || defined(CONFIG_KGDB) | 
 | 	if (debugger_kernel_faults) | 
 | 		debugger(regs); | 
 | #endif | 
 | 	die("kernel access of bad area", regs, sig); | 
 | } | 
 |  | 
 | #ifdef CONFIG_8xx | 
 |  | 
 | /* The pgtable.h claims some functions generically exist, but I | 
 |  * can't find them...... | 
 |  */ | 
 | pte_t *va_to_pte(unsigned long address) | 
 | { | 
 | 	pgd_t *dir; | 
 | 	pmd_t *pmd; | 
 | 	pte_t *pte; | 
 |  | 
 | 	if (address < TASK_SIZE) | 
 | 		return NULL; | 
 |  | 
 | 	dir = pgd_offset(&init_mm, address); | 
 | 	if (dir) { | 
 | 		pmd = pmd_offset(dir, address & PAGE_MASK); | 
 | 		if (pmd && pmd_present(*pmd)) { | 
 | 			pte = pte_offset_kernel(pmd, address & PAGE_MASK); | 
 | 			if (pte && pte_present(*pte)) | 
 | 				return(pte); | 
 | 		} | 
 | 	} | 
 | 	return NULL; | 
 | } | 
 |  | 
 | unsigned long va_to_phys(unsigned long address) | 
 | { | 
 | 	pte_t *pte; | 
 |  | 
 | 	pte = va_to_pte(address); | 
 | 	if (pte) | 
 | 		return(((unsigned long)(pte_val(*pte)) & PAGE_MASK) | (address & ~(PAGE_MASK))); | 
 | 	return (0); | 
 | } | 
 |  | 
 | void | 
 | print_8xx_pte(struct mm_struct *mm, unsigned long addr) | 
 | { | 
 |         pgd_t * pgd; | 
 |         pmd_t * pmd; | 
 |         pte_t * pte; | 
 |  | 
 |         printk(" pte @ 0x%8lx: ", addr); | 
 |         pgd = pgd_offset(mm, addr & PAGE_MASK); | 
 |         if (pgd) { | 
 |                 pmd = pmd_offset(pgd, addr & PAGE_MASK); | 
 |                 if (pmd && pmd_present(*pmd)) { | 
 |                         pte = pte_offset_kernel(pmd, addr & PAGE_MASK); | 
 |                         if (pte) { | 
 |                                 printk(" (0x%08lx)->(0x%08lx)->0x%08lx\n", | 
 |                                         (long)pgd, (long)pte, (long)pte_val(*pte)); | 
 | #define pp ((long)pte_val(*pte))			 | 
 | 				printk(" RPN: %05lx PP: %lx SPS: %lx SH: %lx " | 
 | 				       "CI: %lx v: %lx\n", | 
 | 				       pp>>12,    /* rpn */ | 
 | 				       (pp>>10)&3, /* pp */ | 
 | 				       (pp>>3)&1, /* small */ | 
 | 				       (pp>>2)&1, /* shared */ | 
 | 				       (pp>>1)&1, /* cache inhibit */ | 
 | 				       pp&1       /* valid */ | 
 | 				       ); | 
 | #undef pp			 | 
 |                         } | 
 |                         else { | 
 |                                 printk("no pte\n"); | 
 |                         } | 
 |                 } | 
 |                 else { | 
 |                         printk("no pmd\n"); | 
 |                 } | 
 |         } | 
 |         else { | 
 |                 printk("no pgd\n"); | 
 |         } | 
 | } | 
 |  | 
 | int | 
 | get_8xx_pte(struct mm_struct *mm, unsigned long addr) | 
 | { | 
 |         pgd_t * pgd; | 
 |         pmd_t * pmd; | 
 |         pte_t * pte; | 
 |         int     retval = 0; | 
 |  | 
 |         pgd = pgd_offset(mm, addr & PAGE_MASK); | 
 |         if (pgd) { | 
 |                 pmd = pmd_offset(pgd, addr & PAGE_MASK); | 
 |                 if (pmd && pmd_present(*pmd)) { | 
 |                         pte = pte_offset_kernel(pmd, addr & PAGE_MASK); | 
 |                         if (pte) { | 
 | 				retval = (int)pte_val(*pte); | 
 |                         } | 
 |                 } | 
 |         } | 
 |         return(retval); | 
 | } | 
 | #endif /* CONFIG_8xx */ |