drm/radeon/kms: simplify & improve GPU reset V2
This simplify and improve GPU reset for R1XX-R6XX hw, it's
not 100% reliable here are result:
- R1XX/R2XX works bunch of time in a row, sometimes it
seems it can work indifinitly
- R3XX/R3XX the most unreliable one, sometimes you will be
able to reset few times, sometimes not even once
- R5XX more reliable than previous hw, seems to work most
of the times but once in a while it fails for no obvious
reasons (same status than previous reset just no same
happy ending)
- R6XX/R7XX are lot more reliable with this patch, still
it seems that it can fail after a bunch (reset every
2sec for 3hour bring down the GPU & computer)
This have been tested on various hw, for some odd reasons
i wasn't able to lockup RS480/RS690 (while they use to
love locking up).
Note that on R1XX-R5XX the cursor will disapear after
lockup haven't checked why, switch to console and back
to X will restore cursor.
Next step is to record the bogus command that leaded to
the lockup.
V2 Fix r6xx resume path to avoid reinitializing blit
module, use the gpu_lockup boolean to avoid entering
inifinite waiting loop on fence while reiniting the GPU
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
diff --git a/drivers/gpu/drm/radeon/r100d.h b/drivers/gpu/drm/radeon/r100d.h
index df29a63..de8abd1 100644
--- a/drivers/gpu/drm/radeon/r100d.h
+++ b/drivers/gpu/drm/radeon/r100d.h
@@ -74,6 +74,134 @@
#define CP_PACKET3_GET_OPCODE(h) (((h) >> 8) & 0xFF)
/* Registers */
+#define R_0000F0_RBBM_SOFT_RESET 0x0000F0
+#define S_0000F0_SOFT_RESET_CP(x) (((x) & 0x1) << 0)
+#define G_0000F0_SOFT_RESET_CP(x) (((x) >> 0) & 0x1)
+#define C_0000F0_SOFT_RESET_CP 0xFFFFFFFE
+#define S_0000F0_SOFT_RESET_HI(x) (((x) & 0x1) << 1)
+#define G_0000F0_SOFT_RESET_HI(x) (((x) >> 1) & 0x1)
+#define C_0000F0_SOFT_RESET_HI 0xFFFFFFFD
+#define S_0000F0_SOFT_RESET_SE(x) (((x) & 0x1) << 2)
+#define G_0000F0_SOFT_RESET_SE(x) (((x) >> 2) & 0x1)
+#define C_0000F0_SOFT_RESET_SE 0xFFFFFFFB
+#define S_0000F0_SOFT_RESET_RE(x) (((x) & 0x1) << 3)
+#define G_0000F0_SOFT_RESET_RE(x) (((x) >> 3) & 0x1)
+#define C_0000F0_SOFT_RESET_RE 0xFFFFFFF7
+#define S_0000F0_SOFT_RESET_PP(x) (((x) & 0x1) << 4)
+#define G_0000F0_SOFT_RESET_PP(x) (((x) >> 4) & 0x1)
+#define C_0000F0_SOFT_RESET_PP 0xFFFFFFEF
+#define S_0000F0_SOFT_RESET_E2(x) (((x) & 0x1) << 5)
+#define G_0000F0_SOFT_RESET_E2(x) (((x) >> 5) & 0x1)
+#define C_0000F0_SOFT_RESET_E2 0xFFFFFFDF
+#define S_0000F0_SOFT_RESET_RB(x) (((x) & 0x1) << 6)
+#define G_0000F0_SOFT_RESET_RB(x) (((x) >> 6) & 0x1)
+#define C_0000F0_SOFT_RESET_RB 0xFFFFFFBF
+#define S_0000F0_SOFT_RESET_HDP(x) (((x) & 0x1) << 7)
+#define G_0000F0_SOFT_RESET_HDP(x) (((x) >> 7) & 0x1)
+#define C_0000F0_SOFT_RESET_HDP 0xFFFFFF7F
+#define S_0000F0_SOFT_RESET_MC(x) (((x) & 0x1) << 8)
+#define G_0000F0_SOFT_RESET_MC(x) (((x) >> 8) & 0x1)
+#define C_0000F0_SOFT_RESET_MC 0xFFFFFEFF
+#define S_0000F0_SOFT_RESET_AIC(x) (((x) & 0x1) << 9)
+#define G_0000F0_SOFT_RESET_AIC(x) (((x) >> 9) & 0x1)
+#define C_0000F0_SOFT_RESET_AIC 0xFFFFFDFF
+#define S_0000F0_SOFT_RESET_VIP(x) (((x) & 0x1) << 10)
+#define G_0000F0_SOFT_RESET_VIP(x) (((x) >> 10) & 0x1)
+#define C_0000F0_SOFT_RESET_VIP 0xFFFFFBFF
+#define S_0000F0_SOFT_RESET_DISP(x) (((x) & 0x1) << 11)
+#define G_0000F0_SOFT_RESET_DISP(x) (((x) >> 11) & 0x1)
+#define C_0000F0_SOFT_RESET_DISP 0xFFFFF7FF
+#define S_0000F0_SOFT_RESET_CG(x) (((x) & 0x1) << 12)
+#define G_0000F0_SOFT_RESET_CG(x) (((x) >> 12) & 0x1)
+#define C_0000F0_SOFT_RESET_CG 0xFFFFEFFF
+#define R_000030_BUS_CNTL 0x000030
+#define S_000030_BUS_DBL_RESYNC(x) (((x) & 0x1) << 0)
+#define G_000030_BUS_DBL_RESYNC(x) (((x) >> 0) & 0x1)
+#define C_000030_BUS_DBL_RESYNC 0xFFFFFFFE
+#define S_000030_BUS_MSTR_RESET(x) (((x) & 0x1) << 1)
+#define G_000030_BUS_MSTR_RESET(x) (((x) >> 1) & 0x1)
+#define C_000030_BUS_MSTR_RESET 0xFFFFFFFD
+#define S_000030_BUS_FLUSH_BUF(x) (((x) & 0x1) << 2)
+#define G_000030_BUS_FLUSH_BUF(x) (((x) >> 2) & 0x1)
+#define C_000030_BUS_FLUSH_BUF 0xFFFFFFFB
+#define S_000030_BUS_STOP_REQ_DIS(x) (((x) & 0x1) << 3)
+#define G_000030_BUS_STOP_REQ_DIS(x) (((x) >> 3) & 0x1)
+#define C_000030_BUS_STOP_REQ_DIS 0xFFFFFFF7
+#define S_000030_BUS_PM4_READ_COMBINE_EN(x) (((x) & 0x1) << 4)
+#define G_000030_BUS_PM4_READ_COMBINE_EN(x) (((x) >> 4) & 0x1)
+#define C_000030_BUS_PM4_READ_COMBINE_EN 0xFFFFFFEF
+#define S_000030_BUS_WRT_COMBINE_EN(x) (((x) & 0x1) << 5)
+#define G_000030_BUS_WRT_COMBINE_EN(x) (((x) >> 5) & 0x1)
+#define C_000030_BUS_WRT_COMBINE_EN 0xFFFFFFDF
+#define S_000030_BUS_MASTER_DIS(x) (((x) & 0x1) << 6)
+#define G_000030_BUS_MASTER_DIS(x) (((x) >> 6) & 0x1)
+#define C_000030_BUS_MASTER_DIS 0xFFFFFFBF
+#define S_000030_BIOS_ROM_WRT_EN(x) (((x) & 0x1) << 7)
+#define G_000030_BIOS_ROM_WRT_EN(x) (((x) >> 7) & 0x1)
+#define C_000030_BIOS_ROM_WRT_EN 0xFFFFFF7F
+#define S_000030_BM_DAC_CRIPPLE(x) (((x) & 0x1) << 8)
+#define G_000030_BM_DAC_CRIPPLE(x) (((x) >> 8) & 0x1)
+#define C_000030_BM_DAC_CRIPPLE 0xFFFFFEFF
+#define S_000030_BUS_NON_PM4_READ_COMBINE_EN(x) (((x) & 0x1) << 9)
+#define G_000030_BUS_NON_PM4_READ_COMBINE_EN(x) (((x) >> 9) & 0x1)
+#define C_000030_BUS_NON_PM4_READ_COMBINE_EN 0xFFFFFDFF
+#define S_000030_BUS_XFERD_DISCARD_EN(x) (((x) & 0x1) << 10)
+#define G_000030_BUS_XFERD_DISCARD_EN(x) (((x) >> 10) & 0x1)
+#define C_000030_BUS_XFERD_DISCARD_EN 0xFFFFFBFF
+#define S_000030_BUS_SGL_READ_DISABLE(x) (((x) & 0x1) << 11)
+#define G_000030_BUS_SGL_READ_DISABLE(x) (((x) >> 11) & 0x1)
+#define C_000030_BUS_SGL_READ_DISABLE 0xFFFFF7FF
+#define S_000030_BIOS_DIS_ROM(x) (((x) & 0x1) << 12)
+#define G_000030_BIOS_DIS_ROM(x) (((x) >> 12) & 0x1)
+#define C_000030_BIOS_DIS_ROM 0xFFFFEFFF
+#define S_000030_BUS_PCI_READ_RETRY_EN(x) (((x) & 0x1) << 13)
+#define G_000030_BUS_PCI_READ_RETRY_EN(x) (((x) >> 13) & 0x1)
+#define C_000030_BUS_PCI_READ_RETRY_EN 0xFFFFDFFF
+#define S_000030_BUS_AGP_AD_STEPPING_EN(x) (((x) & 0x1) << 14)
+#define G_000030_BUS_AGP_AD_STEPPING_EN(x) (((x) >> 14) & 0x1)
+#define C_000030_BUS_AGP_AD_STEPPING_EN 0xFFFFBFFF
+#define S_000030_BUS_PCI_WRT_RETRY_EN(x) (((x) & 0x1) << 15)
+#define G_000030_BUS_PCI_WRT_RETRY_EN(x) (((x) >> 15) & 0x1)
+#define C_000030_BUS_PCI_WRT_RETRY_EN 0xFFFF7FFF
+#define S_000030_BUS_RETRY_WS(x) (((x) & 0xF) << 16)
+#define G_000030_BUS_RETRY_WS(x) (((x) >> 16) & 0xF)
+#define C_000030_BUS_RETRY_WS 0xFFF0FFFF
+#define S_000030_BUS_MSTR_RD_MULT(x) (((x) & 0x1) << 20)
+#define G_000030_BUS_MSTR_RD_MULT(x) (((x) >> 20) & 0x1)
+#define C_000030_BUS_MSTR_RD_MULT 0xFFEFFFFF
+#define S_000030_BUS_MSTR_RD_LINE(x) (((x) & 0x1) << 21)
+#define G_000030_BUS_MSTR_RD_LINE(x) (((x) >> 21) & 0x1)
+#define C_000030_BUS_MSTR_RD_LINE 0xFFDFFFFF
+#define S_000030_BUS_SUSPEND(x) (((x) & 0x1) << 22)
+#define G_000030_BUS_SUSPEND(x) (((x) >> 22) & 0x1)
+#define C_000030_BUS_SUSPEND 0xFFBFFFFF
+#define S_000030_LAT_16X(x) (((x) & 0x1) << 23)
+#define G_000030_LAT_16X(x) (((x) >> 23) & 0x1)
+#define C_000030_LAT_16X 0xFF7FFFFF
+#define S_000030_BUS_RD_DISCARD_EN(x) (((x) & 0x1) << 24)
+#define G_000030_BUS_RD_DISCARD_EN(x) (((x) >> 24) & 0x1)
+#define C_000030_BUS_RD_DISCARD_EN 0xFEFFFFFF
+#define S_000030_ENFRCWRDY(x) (((x) & 0x1) << 25)
+#define G_000030_ENFRCWRDY(x) (((x) >> 25) & 0x1)
+#define C_000030_ENFRCWRDY 0xFDFFFFFF
+#define S_000030_BUS_MSTR_WS(x) (((x) & 0x1) << 26)
+#define G_000030_BUS_MSTR_WS(x) (((x) >> 26) & 0x1)
+#define C_000030_BUS_MSTR_WS 0xFBFFFFFF
+#define S_000030_BUS_PARKING_DIS(x) (((x) & 0x1) << 27)
+#define G_000030_BUS_PARKING_DIS(x) (((x) >> 27) & 0x1)
+#define C_000030_BUS_PARKING_DIS 0xF7FFFFFF
+#define S_000030_BUS_MSTR_DISCONNECT_EN(x) (((x) & 0x1) << 28)
+#define G_000030_BUS_MSTR_DISCONNECT_EN(x) (((x) >> 28) & 0x1)
+#define C_000030_BUS_MSTR_DISCONNECT_EN 0xEFFFFFFF
+#define S_000030_SERR_EN(x) (((x) & 0x1) << 29)
+#define G_000030_SERR_EN(x) (((x) >> 29) & 0x1)
+#define C_000030_SERR_EN 0xDFFFFFFF
+#define S_000030_BUS_READ_BURST(x) (((x) & 0x1) << 30)
+#define G_000030_BUS_READ_BURST(x) (((x) >> 30) & 0x1)
+#define C_000030_BUS_READ_BURST 0xBFFFFFFF
+#define S_000030_BUS_RDY_READ_DLY(x) (((x) & 0x1) << 31)
+#define G_000030_BUS_RDY_READ_DLY(x) (((x) >> 31) & 0x1)
+#define C_000030_BUS_RDY_READ_DLY 0x7FFFFFFF
#define R_000040_GEN_INT_CNTL 0x000040
#define S_000040_CRTC_VBLANK(x) (((x) & 0x1) << 0)
#define G_000040_CRTC_VBLANK(x) (((x) >> 0) & 0x1)