iwlagn: remove dual-indirect call to simply the code
After driver split, no need to make the code so complex
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 80f1ef6..f6b309d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -106,9 +106,9 @@
CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
}
/* do additional nic configuration if needed */
- if (priv->cfg->ops->nic &&
- priv->cfg->ops->nic->additional_nic_config) {
- priv->cfg->ops->nic->additional_nic_config(priv);
+ if (priv->cfg->nic &&
+ priv->cfg->nic->additional_nic_config) {
+ priv->cfg->nic->additional_nic_config(priv);
}
}
@@ -311,24 +311,6 @@
.additional_nic_config = &iwl6150_additional_nic_config,
};
-static const struct iwl_ops iwl6000_ops = {
- .lib = &iwl6000_lib,
-};
-
-static const struct iwl_ops iwl6050_ops = {
- .lib = &iwl6000_lib,
- .nic = &iwl6050_nic_ops,
-};
-
-static const struct iwl_ops iwl6150_ops = {
- .lib = &iwl6000_lib,
- .nic = &iwl6150_nic_ops,
-};
-
-static const struct iwl_ops iwl6030_ops = {
- .lib = &iwl6030_lib,
-};
-
static struct iwl_base_params iwl6000_base_params = {
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.num_of_queues = IWLAGN_NUM_QUEUES,
@@ -402,7 +384,7 @@
.ucode_api_min = IWL6000G2_UCODE_API_MIN, \
.eeprom_ver = EEPROM_6005_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6005_TX_POWER_VERSION, \
- .ops = &iwl6000_ops, \
+ .lib = &iwl6000_lib, \
.base_params = &iwl6000_g2_base_params, \
.need_dc_calib = true, \
.need_temp_offset_calib = true, \
@@ -430,7 +412,7 @@
.ucode_api_min = IWL6000G2_UCODE_API_MIN, \
.eeprom_ver = EEPROM_6030_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION, \
- .ops = &iwl6030_ops, \
+ .lib = &iwl6030_lib, \
.base_params = &iwl6000_g2_base_params, \
.bt_params = &iwl6000_bt_params, \
.need_dc_calib = true, \
@@ -511,7 +493,7 @@
.valid_rx_ant = ANT_BC, /* .cfg overwrite */ \
.eeprom_ver = EEPROM_6000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, \
- .ops = &iwl6000_ops, \
+ .lib = &iwl6000_lib, \
.base_params = &iwl6000_base_params, \
.pa_type = IWL_PA_INTERNAL, \
.led_mode = IWL_LED_BLINK
@@ -538,7 +520,8 @@
.ucode_api_min = IWL6050_UCODE_API_MIN, \
.valid_tx_ant = ANT_AB, /* .cfg overwrite */ \
.valid_rx_ant = ANT_AB, /* .cfg overwrite */ \
- .ops = &iwl6050_ops, \
+ .lib = &iwl6000_lib, \
+ .nic = &iwl6050_nic_ops, \
.eeprom_ver = EEPROM_6050_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \
.base_params = &iwl6050_base_params, \
@@ -561,7 +544,8 @@
.fw_name_pre = IWL6050_FW_PRE, \
.ucode_api_max = IWL6050_UCODE_API_MAX, \
.ucode_api_min = IWL6050_UCODE_API_MIN, \
- .ops = &iwl6150_ops, \
+ .lib = &iwl6000_lib, \
+ .nic = &iwl6150_nic_ops, \
.eeprom_ver = EEPROM_6150_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, \
.base_params = &iwl6050_base_params, \
@@ -587,7 +571,7 @@
.ucode_api_min = IWL6000_UCODE_API_MIN,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
- .ops = &iwl6000_ops,
+ .lib = &iwl6000_lib,
.base_params = &iwl6000_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,