UBI: make self-checks dynamic
This patch adds a possibility to dynamically switch UBI self-checks
on and off, instead of toggling them compile-time from the configuration
menu. This is much more flexible, and consistent with UBIFS, and this
also simplifies UBI Kconfig menu and the code.
This patch introduces two levels of self-checks - general, which
includes all self-checks which are relatively fast, and I/O, which
includes write-verify checks and erase-verify checks, which are
relatively slow and involve flash I/O.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index b1ad1ec..aaa6e1e 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -91,7 +91,7 @@
#include <linux/slab.h>
#include "ubi.h"
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+#ifdef CONFIG_MTD_UBI_DEBUG
static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum);
static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum);
static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
@@ -1126,7 +1126,7 @@
return err;
}
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+#ifdef CONFIG_MTD_UBI_DEBUG
/**
* paranoid_check_not_bad - ensure that a physical eraseblock is not bad.
@@ -1140,6 +1140,9 @@
{
int err;
+ if (!(ubi_chk_flags & UBI_CHK_IO))
+ return 0;
+
err = ubi_io_is_bad(ubi, pnum);
if (!err)
return err;
@@ -1164,6 +1167,9 @@
int err;
uint32_t magic;
+ if (!(ubi_chk_flags & UBI_CHK_IO))
+ return 0;
+
magic = be32_to_cpu(ec_hdr->magic);
if (magic != UBI_EC_HDR_MAGIC) {
ubi_err("bad magic %#08x, must be %#08x",
@@ -1199,6 +1205,9 @@
uint32_t crc, hdr_crc;
struct ubi_ec_hdr *ec_hdr;
+ if (!(ubi_chk_flags & UBI_CHK_IO))
+ return 0;
+
ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS);
if (!ec_hdr)
return -ENOMEM;
@@ -1240,6 +1249,9 @@
int err;
uint32_t magic;
+ if (!(ubi_chk_flags & UBI_CHK_IO))
+ return 0;
+
magic = be32_to_cpu(vid_hdr->magic);
if (magic != UBI_VID_HDR_MAGIC) {
ubi_err("bad VID header magic %#08x at PEB %d, must be %#08x",
@@ -1278,6 +1290,9 @@
struct ubi_vid_hdr *vid_hdr;
void *p;
+ if (!(ubi_chk_flags & UBI_CHK_IO))
+ return 0;
+
vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
if (!vid_hdr)
return -ENOMEM;
@@ -1327,6 +1342,9 @@
void *buf1;
loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
+ if (!(ubi_chk_flags & UBI_CHK_IO))
+ return 0;
+
buf1 = __vmalloc(len, GFP_KERNEL | GFP_NOFS, PAGE_KERNEL);
if (!buf1) {
ubi_err("cannot allocate memory to check writes");
@@ -1388,6 +1406,9 @@
void *buf;
loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
+ if (!(ubi_chk_flags & UBI_CHK_IO))
+ return 0;
+
buf = __vmalloc(len, GFP_KERNEL | GFP_NOFS, PAGE_KERNEL);
if (!buf) {
ubi_err("cannot allocate memory to check for 0xFFs");
@@ -1422,4 +1443,4 @@
return err;
}
-#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
+#endif /* CONFIG_MTD_UBI_DEBUG */