sh: Consolidated SH7751/SH7780 PCI support.
This cleans up quite a lot of the PCI mess that we
currently have, and attempts to consolidate the
duplication in the SH7780 and SH7751 PCI controllers.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/snapgear/io.c
index 9f700b8..0f48242 100644
--- a/arch/sh/boards/snapgear/io.c
+++ b/arch/sh/boards/snapgear/io.c
@@ -1,6 +1,4 @@
-/*
- * linux/arch/sh/kernel/io_7751se.c
- *
+/*
* Copyright (C) 2002 David McCullough <davidm@snapgear.com>
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
@@ -11,54 +9,22 @@
* placeholder code from io_se.c left in with the
* expectation of later SuperIO and PCMCIA access.
*/
-
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/addrspace.h>
-#include <asm/pci.h>
-#include "../../drivers/pci/pci-sh7751.h"
-
#ifdef CONFIG_SH_SECUREEDGE5410
unsigned short secureedge5410_ioport;
#endif
-/*
- * The SnapGear uses the built-in PCI controller (PCIC)
- * of the 7751 processor
- */
-
-#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
-#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
-#define PCI_IO_AREA SH7751_PCI_IO_BASE
-#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
-
-#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
-
-static inline void delay(void)
-{
- ctrl_inw(0xa0000000);
-}
-
static inline volatile __u16 *port2adr(unsigned int port)
{
maybebadio((unsigned long)port);
return (volatile __u16*)port;
}
-/* In case someone configures the kernel w/o PCI support: in that */
-/* scenario, don't ever bother to check for PCI-window addresses */
-
-/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
-#if defined(CONFIG_PCI)
-#define CHECK_SH7751_PCIIO(port) \
- ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
-#else
-#define CHECK_SH7751_PCIIO(port) (0)
-#endif
-
/*
* General outline: remap really low stuff [eventually] to SuperIO,
* stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
@@ -66,39 +32,36 @@
* should be way beyond the window, and is used w/o translation for
* compatibility.
*/
-
unsigned char snapgear_inb(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned char *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned char *)pci_ioaddr(port);
else
- return (*port2adr(port))&0xff;
+ return (*port2adr(port)) & 0xff;
}
-
unsigned char snapgear_inb_p(unsigned long port)
{
unsigned char v;
if (PXSEG(port))
v = *(volatile unsigned char *)port;
- else if (CHECK_SH7751_PCIIO(port))
- v = *(volatile unsigned char *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ v = *(volatile unsigned char *)pci_ioaddr(port);
else
- v = (*port2adr(port))&0xff;
- delay();
+ v = (*port2adr(port))&0xff;
+ ctrl_delay();
return v;
}
-
unsigned short snapgear_inw(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned short *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
@@ -106,13 +69,12 @@
return 0;
}
-
unsigned int snapgear_inl(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned int *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
@@ -120,50 +82,46 @@
return 0;
}
-
void snapgear_outb(unsigned char value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned char*)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
}
-
void snapgear_outb_p(unsigned char value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned char*)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
- delay();
+ ctrl_delay();
}
-
void snapgear_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned short *)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else
maybebadio(port);
}
-
void snapgear_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned long*)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned long*)pci_ioaddr(port)) = value;
else
maybebadio(port);
}