lmb: rename to memblock
via following scripts
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/lmb/memblock/g' \
-e 's/LMB/MEMBLOCK/g' \
$FILES
for N in $(find . -name lmb.[ch]); do
M=$(echo $N | sed 's/lmb/memblock/g')
mv $N $M
done
and remove some wrong change like lmbench and dlmb etc.
also move memblock.c from lib/ to mm/
Suggested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 05131d6..9d39539 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -31,7 +31,7 @@
#include <linux/kexec.h>
#include <linux/debugfs.h>
#include <linux/irq.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -98,7 +98,7 @@
if ((memory_limit && (start + size) > memory_limit) ||
overlaps_crashkernel(start, size)) {
- p = __va(lmb_alloc_base(size, PAGE_SIZE, lmb.rmo_size));
+ p = __va(memblock_alloc_base(size, PAGE_SIZE, memblock.rmo_size));
memcpy(p, initial_boot_params, size);
initial_boot_params = (struct boot_param_header *)p;
DBG("Moved device tree to 0x%p\n", p);
@@ -411,13 +411,13 @@
{
__be32 *dm, *ls, *usm;
unsigned long l, n, flags;
- u64 base, size, lmb_size;
+ u64 base, size, memblock_size;
unsigned int is_kexec_kdump = 0, rngs;
- ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
+ ls = of_get_flat_dt_prop(node, "ibm,memblock-size", &l);
if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
return 0;
- lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls);
+ memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls);
dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
if (dm == NULL || l < sizeof(__be32))
@@ -442,11 +442,11 @@
or if the block is not assigned to this partition (0x8) */
if ((flags & 0x80) || !(flags & 0x8))
continue;
- size = lmb_size;
+ size = memblock_size;
rngs = 1;
if (is_kexec_kdump) {
/*
- * For each lmb in ibm,dynamic-memory, a corresponding
+ * For each memblock in ibm,dynamic-memory, a corresponding
* entry in linux,drconf-usable-memory property contains
* a counter 'p' followed by 'p' (base, size) duple.
* Now read the counter from
@@ -469,10 +469,10 @@
if ((base + size) > 0x80000000ul)
size = 0x80000000ul - base;
}
- lmb_add(base, size);
+ memblock_add(base, size);
} while (--rngs);
}
- lmb_dump_all();
+ memblock_dump_all();
return 0;
}
#else
@@ -501,14 +501,14 @@
}
#endif
- lmb_add(base, size);
+ memblock_add(base, size);
memstart_addr = min((u64)memstart_addr, base);
}
u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
{
- return lmb_alloc(size, align);
+ return memblock_alloc(size, align);
}
#ifdef CONFIG_BLK_DEV_INITRD
@@ -534,12 +534,12 @@
/* before we do anything, lets reserve the dt blob */
self_base = __pa((unsigned long)initial_boot_params);
self_size = initial_boot_params->totalsize;
- lmb_reserve(self_base, self_size);
+ memblock_reserve(self_base, self_size);
#ifdef CONFIG_BLK_DEV_INITRD
/* then reserve the initrd, if any */
if (initrd_start && (initrd_end > initrd_start))
- lmb_reserve(__pa(initrd_start), initrd_end - initrd_start);
+ memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
#endif /* CONFIG_BLK_DEV_INITRD */
#ifdef CONFIG_PPC32
@@ -560,7 +560,7 @@
if (base_32 == self_base && size_32 == self_size)
continue;
DBG("reserving: %x -> %x\n", base_32, size_32);
- lmb_reserve(base_32, size_32);
+ memblock_reserve(base_32, size_32);
}
return;
}
@@ -571,7 +571,7 @@
if (size == 0)
break;
DBG("reserving: %llx -> %llx\n", base, size);
- lmb_reserve(base, size);
+ memblock_reserve(base, size);
}
}
@@ -594,7 +594,7 @@
return phyp_dump_info->reserve_bootvar;
/* divide by 20 to get 5% of value */
- tmp = lmb_end_of_DRAM();
+ tmp = memblock_end_of_DRAM();
do_div(tmp, 20);
/* round it down in multiples of 256 */
@@ -633,11 +633,11 @@
if (phyp_dump_info->phyp_dump_is_active) {
/* Reserve *everything* above RMR.Area freed by userland tools*/
base = variable_reserve_size;
- size = lmb_end_of_DRAM() - base;
+ size = memblock_end_of_DRAM() - base;
/* XXX crashed_ram_end is wrong, since it may be beyond
* the memory_limit, it will need to be adjusted. */
- lmb_reserve(base, size);
+ memblock_reserve(base, size);
phyp_dump_info->init_reserve_start = base;
phyp_dump_info->init_reserve_size = size;
@@ -645,8 +645,8 @@
size = phyp_dump_info->cpu_state_size +
phyp_dump_info->hpte_region_size +
variable_reserve_size;
- base = lmb_end_of_DRAM() - size;
- lmb_reserve(base, size);
+ base = memblock_end_of_DRAM() - size;
+ memblock_reserve(base, size);
phyp_dump_info->init_reserve_start = base;
phyp_dump_info->init_reserve_size = size;
}
@@ -681,8 +681,8 @@
*/
of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
- /* Scan memory nodes and rebuild LMBs */
- lmb_init();
+ /* Scan memory nodes and rebuild MEMBLOCKs */
+ memblock_init();
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
@@ -690,11 +690,11 @@
strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
parse_early_param();
- /* Reserve LMB regions used by kernel, initrd, dt, etc... */
- lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
+ /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
+ memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
/* If relocatable, reserve first 32k for interrupt vectors etc. */
if (PHYSICAL_START > MEMORY_START)
- lmb_reserve(MEMORY_START, 0x8000);
+ memblock_reserve(MEMORY_START, 0x8000);
reserve_kdump_trampoline();
reserve_crashkernel();
early_reserve_mem();
@@ -706,17 +706,17 @@
/* Ensure that total memory size is page-aligned, because
* otherwise mark_bootmem() gets upset. */
- lmb_analyze();
- memsize = lmb_phys_mem_size();
+ memblock_analyze();
+ memsize = memblock_phys_mem_size();
if ((memsize & PAGE_MASK) != memsize)
limit = memsize & PAGE_MASK;
}
- lmb_enforce_memory_limit(limit);
+ memblock_enforce_memory_limit(limit);
- lmb_analyze();
- lmb_dump_all();
+ memblock_analyze();
+ memblock_dump_all();
- DBG("Phys. mem: %llx\n", lmb_phys_mem_size());
+ DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
/* We may need to relocate the flat tree, do it now.
* FIXME .. and the initrd too? */