| /* |
| * Renesas USB driver |
| * |
| * Copyright (C) 2011 Renesas Solutions Corp. |
| * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| #ifndef RENESAS_USB_DRIVER_H |
| #define RENESAS_USB_DRIVER_H |
| |
| #include <linux/platform_device.h> |
| #include <linux/usb/renesas_usbhs.h> |
| |
| struct usbhs_priv; |
| |
| #include "mod.h" |
| #include "pipe.h" |
| |
| /* |
| * |
| * register define |
| * |
| */ |
| #define SYSCFG 0x0000 |
| #define BUSWAIT 0x0002 |
| #define DVSTCTR 0x0008 |
| #define TESTMODE 0x000C |
| #define CFIFO 0x0014 |
| #define CFIFOSEL 0x0020 |
| #define CFIFOCTR 0x0022 |
| #define D0FIFO 0x0100 |
| #define D0FIFOSEL 0x0028 |
| #define D0FIFOCTR 0x002A |
| #define D1FIFO 0x0120 |
| #define D1FIFOSEL 0x002C |
| #define D1FIFOCTR 0x002E |
| #define INTENB0 0x0030 |
| #define INTENB1 0x0032 |
| #define BRDYENB 0x0036 |
| #define NRDYENB 0x0038 |
| #define BEMPENB 0x003A |
| #define INTSTS0 0x0040 |
| #define INTSTS1 0x0042 |
| #define BRDYSTS 0x0046 |
| #define NRDYSTS 0x0048 |
| #define BEMPSTS 0x004A |
| #define FRMNUM 0x004C |
| #define USBREQ 0x0054 /* USB request type register */ |
| #define USBVAL 0x0056 /* USB request value register */ |
| #define USBINDX 0x0058 /* USB request index register */ |
| #define USBLENG 0x005A /* USB request length register */ |
| #define DCPCFG 0x005C |
| #define DCPMAXP 0x005E |
| #define DCPCTR 0x0060 |
| #define PIPESEL 0x0064 |
| #define PIPECFG 0x0068 |
| #define PIPEBUF 0x006A |
| #define PIPEMAXP 0x006C |
| #define PIPEPERI 0x006E |
| #define PIPEnCTR 0x0070 |
| #define PIPE1TRE 0x0090 |
| #define PIPE1TRN 0x0092 |
| #define PIPE2TRE 0x0094 |
| #define PIPE2TRN 0x0096 |
| #define PIPE3TRE 0x0098 |
| #define PIPE3TRN 0x009A |
| #define PIPE4TRE 0x009C |
| #define PIPE4TRN 0x009E |
| #define PIPE5TRE 0x00A0 |
| #define PIPE5TRN 0x00A2 |
| #define PIPEBTRE 0x00A4 |
| #define PIPEBTRN 0x00A6 |
| #define PIPECTRE 0x00A8 |
| #define PIPECTRN 0x00AA |
| #define PIPEDTRE 0x00AC |
| #define PIPEDTRN 0x00AE |
| #define PIPEETRE 0x00B0 |
| #define PIPEETRN 0x00B2 |
| #define PIPEFTRE 0x00B4 |
| #define PIPEFTRN 0x00B6 |
| #define PIPE9TRE 0x00B8 |
| #define PIPE9TRN 0x00BA |
| #define PIPEATRE 0x00BC |
| #define PIPEATRN 0x00BE |
| #define DEVADD0 0x00D0 /* Device address n configuration */ |
| #define DEVADD1 0x00D2 |
| #define DEVADD2 0x00D4 |
| #define DEVADD3 0x00D6 |
| #define DEVADD4 0x00D8 |
| #define DEVADD5 0x00DA |
| #define DEVADD6 0x00DC |
| #define DEVADD7 0x00DE |
| #define DEVADD8 0x00E0 |
| #define DEVADD9 0x00E2 |
| #define DEVADDA 0x00E4 |
| |
| /* SYSCFG */ |
| #define SCKE (1 << 10) /* USB Module Clock Enable */ |
| #define HSE (1 << 7) /* High-Speed Operation Enable */ |
| #define DCFM (1 << 6) /* Controller Function Select */ |
| #define DRPD (1 << 5) /* D+ Line/D- Line Resistance Control */ |
| #define DPRPU (1 << 4) /* D+ Line Resistance Control */ |
| #define USBE (1 << 0) /* USB Module Operation Enable */ |
| |
| /* DVSTCTR */ |
| #define EXTLP (1 << 10) /* Controls the EXTLP pin output state */ |
| #define PWEN (1 << 9) /* Controls the PWEN pin output state */ |
| #define USBRST (1 << 6) /* Bus Reset Output */ |
| #define UACT (1 << 4) /* USB Bus Enable */ |
| #define RHST (0x7) /* Reset Handshake */ |
| #define RHST_LOW_SPEED 1 /* Low-speed connection */ |
| #define RHST_FULL_SPEED 2 /* Full-speed connection */ |
| #define RHST_HIGH_SPEED 3 /* High-speed connection */ |
| |
| /* CFIFOSEL */ |
| #define DREQE (1 << 12) /* DMA Transfer Request Enable */ |
| #define MBW_32 (0x2 << 10) /* CFIFO Port Access Bit Width */ |
| |
| /* CFIFOCTR */ |
| #define BVAL (1 << 15) /* Buffer Memory Enable Flag */ |
| #define BCLR (1 << 14) /* CPU buffer clear */ |
| #define FRDY (1 << 13) /* FIFO Port Ready */ |
| #define DTLN_MASK (0x0FFF) /* Receive Data Length */ |
| |
| /* INTENB0 */ |
| #define VBSE (1 << 15) /* Enable IRQ VBUS_0 and VBUSIN_0 */ |
| #define RSME (1 << 14) /* Enable IRQ Resume */ |
| #define SOFE (1 << 13) /* Enable IRQ Frame Number Update */ |
| #define DVSE (1 << 12) /* Enable IRQ Device State Transition */ |
| #define CTRE (1 << 11) /* Enable IRQ Control Stage Transition */ |
| #define BEMPE (1 << 10) /* Enable IRQ Buffer Empty */ |
| #define NRDYE (1 << 9) /* Enable IRQ Buffer Not Ready Response */ |
| #define BRDYE (1 << 8) /* Enable IRQ Buffer Ready */ |
| |
| /* INTENB1 */ |
| #define BCHGE (1 << 14) /* USB Bus Change Interrupt Enable */ |
| #define DTCHE (1 << 12) /* Disconnection Detect Interrupt Enable */ |
| #define ATTCHE (1 << 11) /* Connection Detect Interrupt Enable */ |
| #define EOFERRE (1 << 6) /* EOF Error Detect Interrupt Enable */ |
| #define SIGNE (1 << 5) /* Setup Transaction Error Interrupt Enable */ |
| #define SACKE (1 << 4) /* Setup Transaction ACK Interrupt Enable */ |
| |
| /* INTSTS0 */ |
| #define VBINT (1 << 15) /* VBUS0_0 and VBUS1_0 Interrupt Status */ |
| #define DVST (1 << 12) /* Device State Transition Interrupt Status */ |
| #define CTRT (1 << 11) /* Control Stage Interrupt Status */ |
| #define BEMP (1 << 10) /* Buffer Empty Interrupt Status */ |
| #define BRDY (1 << 8) /* Buffer Ready Interrupt Status */ |
| #define VBSTS (1 << 7) /* VBUS_0 and VBUSIN_0 Input Status */ |
| #define VALID (1 << 3) /* USB Request Receive */ |
| |
| #define DVSQ_MASK (0x3 << 4) /* Device State */ |
| #define POWER_STATE (0 << 4) |
| #define DEFAULT_STATE (1 << 4) |
| #define ADDRESS_STATE (2 << 4) |
| #define CONFIGURATION_STATE (3 << 4) |
| |
| #define CTSQ_MASK (0x7) /* Control Transfer Stage */ |
| #define IDLE_SETUP_STAGE 0 /* Idle stage or setup stage */ |
| #define READ_DATA_STAGE 1 /* Control read data stage */ |
| #define READ_STATUS_STAGE 2 /* Control read status stage */ |
| #define WRITE_DATA_STAGE 3 /* Control write data stage */ |
| #define WRITE_STATUS_STAGE 4 /* Control write status stage */ |
| #define NODATA_STATUS_STAGE 5 /* Control write NoData status stage */ |
| #define SEQUENCE_ERROR 6 /* Control transfer sequence error */ |
| |
| /* INTSTS1 */ |
| #define OVRCR (1 << 15) /* OVRCR Interrupt Status */ |
| #define BCHG (1 << 14) /* USB Bus Change Interrupt Status */ |
| #define DTCH (1 << 12) /* USB Disconnection Detect Interrupt Status */ |
| #define ATTCH (1 << 11) /* ATTCH Interrupt Status */ |
| #define EOFERR (1 << 6) /* EOF Error Detect Interrupt Status */ |
| #define SIGN (1 << 5) /* Setup Transaction Error Interrupt Status */ |
| #define SACK (1 << 4) /* Setup Transaction ACK Response Interrupt Status */ |
| |
| /* PIPECFG */ |
| /* DCPCFG */ |
| #define TYPE_NONE (0 << 14) /* Transfer Type */ |
| #define TYPE_BULK (1 << 14) |
| #define TYPE_INT (2 << 14) |
| #define TYPE_ISO (3 << 14) |
| #define DBLB (1 << 9) /* Double Buffer Mode */ |
| #define SHTNAK (1 << 7) /* Pipe Disable in Transfer End */ |
| #define DIR_OUT (1 << 4) /* Transfer Direction */ |
| |
| /* PIPEMAXP */ |
| /* DCPMAXP */ |
| #define DEVSEL_MASK (0xF << 12) /* Device Select */ |
| #define DCP_MAXP_MASK (0x7F) |
| #define PIPE_MAXP_MASK (0x7FF) |
| |
| /* PIPEBUF */ |
| #define BUFSIZE_SHIFT 10 |
| #define BUFSIZE_MASK (0x1F << BUFSIZE_SHIFT) |
| #define BUFNMB_MASK (0xFF) |
| |
| /* PIPEnCTR */ |
| /* DCPCTR */ |
| #define BSTS (1 << 15) /* Buffer Status */ |
| #define SUREQ (1 << 14) /* Sending SETUP Token */ |
| #define CSSTS (1 << 12) /* CSSTS Status */ |
| #define ACLRM (1 << 9) /* Buffer Auto-Clear Mode */ |
| #define SQCLR (1 << 8) /* Toggle Bit Clear */ |
| #define SQSET (1 << 7) /* Toggle Bit Set */ |
| #define PBUSY (1 << 5) /* Pipe Busy */ |
| #define PID_MASK (0x3) /* Response PID */ |
| #define PID_NAK 0 |
| #define PID_BUF 1 |
| #define PID_STALL10 2 |
| #define PID_STALL11 3 |
| |
| #define CCPL (1 << 2) /* Control Transfer End Enable */ |
| |
| /* PIPEnTRE */ |
| #define TRENB (1 << 9) /* Transaction Counter Enable */ |
| #define TRCLR (1 << 8) /* Transaction Counter Clear */ |
| |
| /* FRMNUM */ |
| #define FRNM_MASK (0x7FF) |
| |
| /* DEVADDn */ |
| #define UPPHUB(x) (((x) & 0xF) << 11) /* HUB Register */ |
| #define HUBPORT(x) (((x) & 0x7) << 8) /* HUB Port for Target Device */ |
| #define USBSPD(x) (((x) & 0x3) << 6) /* Device Transfer Rate */ |
| #define USBSPD_SPEED_LOW 0x1 |
| #define USBSPD_SPEED_FULL 0x2 |
| #define USBSPD_SPEED_HIGH 0x3 |
| |
| /* |
| * struct |
| */ |
| struct usbhs_priv { |
| |
| void __iomem *base; |
| unsigned int irq; |
| unsigned long irqflags; |
| |
| struct renesas_usbhs_platform_callback pfunc; |
| struct renesas_usbhs_driver_param dparam; |
| |
| struct delayed_work notify_hotplug_work; |
| struct platform_device *pdev; |
| |
| spinlock_t lock; |
| |
| u32 flags; |
| |
| /* |
| * module control |
| */ |
| struct usbhs_mod_info mod_info; |
| |
| /* |
| * pipe control |
| */ |
| struct usbhs_pipe_info pipe_info; |
| |
| /* |
| * fifo control |
| */ |
| struct usbhs_fifo_info fifo_info; |
| }; |
| |
| /* |
| * common |
| */ |
| u16 usbhs_read(struct usbhs_priv *priv, u32 reg); |
| void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data); |
| void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data); |
| |
| #define usbhs_lock(p, f) spin_lock_irqsave(usbhs_priv_to_lock(p), f) |
| #define usbhs_unlock(p, f) spin_unlock_irqrestore(usbhs_priv_to_lock(p), f) |
| |
| /* |
| * sysconfig |
| */ |
| void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable); |
| void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable); |
| void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable); |
| void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode); |
| |
| /* |
| * usb request |
| */ |
| void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req); |
| void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req); |
| |
| /* |
| * bus |
| */ |
| void usbhs_bus_send_sof_enable(struct usbhs_priv *priv); |
| void usbhs_bus_send_reset(struct usbhs_priv *priv); |
| int usbhs_bus_get_speed(struct usbhs_priv *priv); |
| int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable); |
| |
| /* |
| * frame |
| */ |
| int usbhs_frame_get_num(struct usbhs_priv *priv); |
| |
| /* |
| * device config |
| */ |
| int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, u16 upphub, |
| u16 hubport, u16 speed); |
| |
| /* |
| * data |
| */ |
| struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev); |
| #define usbhs_get_dparam(priv, param) (priv->dparam.param) |
| #define usbhs_priv_to_pdev(priv) (priv->pdev) |
| #define usbhs_priv_to_dev(priv) (&priv->pdev->dev) |
| #define usbhs_priv_to_lock(priv) (&priv->lock) |
| |
| #endif /* RENESAS_USB_DRIVER_H */ |