ARM: OMAP: SmartReflex: pass device dependent data via platform data
Remove the device dependent code (ex. cpu_is_xxx()) and settings
from the driver code and instead pass them via the platform
data. This allows a clean separation of the driver code and the platform
code, as required by the move of the platform header files to
include/linux/platform_data.
Note about the smartreflex functional clocks: the smartreflex fclks
are derived from sys_clk and have the same name as the main_clk from
the hwmod entry, in order for the SmartReflex driver to request the
fclk (using clk_get(dev, "fck")).
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
index 24768a2..4c4519e 100644
--- a/drivers/power/avs/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -130,24 +130,21 @@
static void sr_set_clk_length(struct omap_sr *sr)
{
- struct clk *sys_ck;
- u32 sys_clk_speed;
+ struct clk *fck;
+ u32 fclk_speed;
- if (cpu_is_omap34xx())
- sys_ck = clk_get(NULL, "sys_ck");
- else
- sys_ck = clk_get(NULL, "sys_clkin_ck");
+ fck = clk_get(&sr->pdev->dev, "fck");
- if (IS_ERR(sys_ck)) {
- dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n",
- __func__);
+ if (IS_ERR(fck)) {
+ dev_err(&sr->pdev->dev, "%s: unable to get fck for device %s\n",
+ __func__, dev_name(&sr->pdev->dev));
return;
}
- sys_clk_speed = clk_get_rate(sys_ck);
- clk_put(sys_ck);
+ fclk_speed = clk_get_rate(fck);
+ clk_put(fck);
- switch (sys_clk_speed) {
+ switch (fclk_speed) {
case 12000000:
sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
break;
@@ -164,34 +161,12 @@
sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
break;
default:
- dev_err(&sr->pdev->dev, "%s: Invalid sysclk value: %d\n",
- __func__, sys_clk_speed);
+ dev_err(&sr->pdev->dev, "%s: Invalid fclk rate: %d\n",
+ __func__, fclk_speed);
break;
}
}
-static void sr_set_regfields(struct omap_sr *sr)
-{
- /*
- * For time being these values are defined in smartreflex.h
- * and populated during init. May be they can be moved to board
- * file or pmic specific data structure. In that case these structure
- * fields will have to be populated using the pdata or pmic structure.
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- sr->err_weight = OMAP3430_SR_ERRWEIGHT;
- sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
- sr->accum_data = OMAP3430_SR_ACCUMDATA;
- if (!(strcmp(sr->name, "smartreflex_mpu_iva"))) {
- sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
- sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
- } else {
- sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
- sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
- }
- }
-}
-
static void sr_start_vddautocomp(struct omap_sr *sr)
{
if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
@@ -924,8 +899,14 @@
sr_info->nvalue_count = pdata->nvalue_count;
sr_info->senn_mod = pdata->senn_mod;
sr_info->senp_mod = pdata->senp_mod;
+ sr_info->err_weight = pdata->err_weight;
+ sr_info->err_maxlimit = pdata->err_maxlimit;
+ sr_info->accum_data = pdata->accum_data;
+ sr_info->senn_avgweight = pdata->senn_avgweight;
+ sr_info->senp_avgweight = pdata->senp_avgweight;
sr_info->autocomp_active = false;
sr_info->ip_type = pdata->ip_type;
+
sr_info->base = ioremap(mem->start, resource_size(mem));
if (!sr_info->base) {
dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
@@ -937,7 +918,6 @@
sr_info->irq = irq->start;
sr_set_clk_length(sr_info);
- sr_set_regfields(sr_info);
list_add(&sr_info->node, &sr_list);