ARM: ux500: Change the type of interrupt to something compatible
On boot the Nomadik GPIO controller complains that an IRQ can't be
configured as active high level-sensitive, so this patch converts
it to be low-to-high edge triggered instead.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi
index 6c7e492..39446a2 100644
--- a/arch/arm/boot/dts/stuib.dtsi
+++ b/arch/arm/boot/dts/stuib.dtsi
@@ -15,7 +15,7 @@
stmpe1601: stmpe1601@40 {
compatible = "st,stmpe1601";
reg = <0x40>;
- interrupts = <26 0x4>;
+ interrupts = <26 0x1>;
interrupt-parent = <&gpio6>;
interrupt-controller;