commit 98d109f90fc02ce8baf1c2471ffcf8d66fb0d8e6
author Andy Walls <awalls@md.metrocast.net> Mon Jul 19 00:41:41 2010 -0300
committer Mauro Carvalho Chehab <mchehab@redhat.com> Sun Aug 08 23:42:55 2010 -0300
tree df1a3191953696bcccc618a25f749ee8071565a9
parent d6b1850d3c49e66f17bbb67f964a48b11528f56b

V4L/DVB: cx23885: Add preliminary IR Rx support for the HVR-1250 and TeVii S470

Add initial IR Rx support using the intergrated IR controller in the
A/V core of the CX23885 bridge chip.

This initial support is flawed in that I2C transactions should not
be performed in a hard irq context.  That will be fixed in a
follow on patch.

The TeVii S470 support is reported to generate perptual interrupts
that renders a user' system nearly unusable.  The TeVii S470 IR
will be disabled by default in a follow on patch.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/cx23885/cx23885-input.c

diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index 496d751..3f924e2 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -99,8 +99,10 @@
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 		/*
-		 * The only board we handle right now.  However other boards
+		 * The only boards we handle right now.  However other boards
 		 * using the CX2388x integrated IR controller should be similar
 		 */
 		break;
@@ -148,6 +150,7 @@
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 		/*
 		 * The IR controller on this board only returns pulse widths.
 		 * Any other mode setting will fail to set up the device.
@@ -172,6 +175,37 @@
 		 */
 		params.invert_level = true;
 		break;
+	case CX23885_BOARD_TEVII_S470:
+		/*
+		 * The IR controller on this board only returns pulse widths.
+		 * Any other mode setting will fail to set up the device.
+		 */
+		params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+		params.enable = true;
+		params.interrupt_enable = true;
+		params.shutdown = false;
+
+		/* Setup for a standard NEC protocol */
+		params.carrier_freq = 37917; /* Hz, 455 kHz/12 for NEC */
+		params.carrier_range_lower = 33000; /* Hz */
+		params.carrier_range_upper = 43000; /* Hz */
+		params.duty_cycle = 33; /* percent, 33 percent for NEC */
+
+		/*
+		 * NEC max pulse width: (64/3)/(455 kHz/12) * 16 nec_units
+		 * (64/3)/(455 kHz/12) * 16 nec_units * 1.375 = 12378022 ns
+		 */
+		params.max_pulse_width = 12378022; /* ns */
+
+		/*
+		 * NEC noise filter min width: (64/3)/(455 kHz/12) * 1 nec_unit
+		 * (64/3)/(455 kHz/12) * 1 nec_units * 0.625 = 351648 ns
+		 */
+		params.noise_filter_min_width = 351648; /* ns */
+
+		params.modulation = false;
+		params.invert_level = true;
+		break;
 	}
 	v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
 	return 0;
@@ -244,12 +278,20 @@
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
-		/* Integrated CX23888 IR controller */
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		/* Integrated CX2388[58] IR controller */
 		driver_type = RC_DRIVER_IR_RAW;
 		allowed_protos = IR_TYPE_ALL;
 		/* The grey Hauppauge RC-5 remote */
 		rc_map = RC_MAP_RC5_HAUPPAUGE_NEW;
 		break;
+	case CX23885_BOARD_TEVII_S470:
+		/* Integrated CX23885 IR controller */
+		driver_type = RC_DRIVER_IR_RAW;
+		allowed_protos = IR_TYPE_ALL;
+		/* A guess at the remote */
+		rc_map = RC_MAP_TEVII_NEC;
+		break;
 	default:
 		return -ENODEV;
 	}