| /* | 
 |  * This file is subject to the terms and conditions of the GNU General Public | 
 |  * License.  See the file "COPYING" in the main directory of this archive | 
 |  * for more details. | 
 |  * | 
 |  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/timer.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/gpio.h> | 
 |  | 
 | #include <bcm63xx_regs.h> | 
 | #include <bcm63xx_io.h> | 
 | #include "bcm63xx_pcmcia.h" | 
 |  | 
 | #define PFX	"bcm63xx_pcmcia: " | 
 |  | 
 | #ifdef CONFIG_CARDBUS | 
 | /* if cardbus is used, platform device needs reference to actual pci | 
 |  * device */ | 
 | static struct pci_dev *bcm63xx_cb_dev; | 
 | #endif | 
 |  | 
 | /* | 
 |  * read/write helper for pcmcia regs | 
 |  */ | 
 | static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off) | 
 | { | 
 | 	return bcm_readl(skt->base + off); | 
 | } | 
 |  | 
 | static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt, | 
 | 				 u32 val, u32 off) | 
 | { | 
 | 	bcm_writel(val, skt->base + off); | 
 | } | 
 |  | 
 | /* | 
 |  * This callback should (re-)initialise the socket, turn on status | 
 |  * interrupts and PCMCIA bus, and wait for power to stabilise so that | 
 |  * the card status signals report correctly. | 
 |  * | 
 |  * Hardware cannot do that. | 
 |  */ | 
 | static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * This callback should remove power on the socket, disable IRQs from | 
 |  * the card, turn off status interrupts, and disable the PCMCIA bus. | 
 |  * | 
 |  * Hardware cannot do that. | 
 |  */ | 
 | static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Implements the set_socket() operation for the in-kernel PCMCIA | 
 |  * service (formerly SS_SetSocket in Card Services). We more or | 
 |  * less punt all of this work and let the kernel handle the details | 
 |  * of power configuration, reset, &c. We also record the value of | 
 |  * `state' in order to regurgitate it to the PCMCIA core later. | 
 |  */ | 
 | static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock, | 
 | 				     socket_state_t *state) | 
 | { | 
 | 	struct bcm63xx_pcmcia_socket *skt; | 
 | 	unsigned long flags; | 
 | 	u32 val; | 
 |  | 
 | 	skt = sock->driver_data; | 
 |  | 
 | 	spin_lock_irqsave(&skt->lock, flags); | 
 |  | 
 | 	/* note: hardware cannot control socket power, so we will | 
 | 	 * always report SS_POWERON */ | 
 |  | 
 | 	/* apply socket reset */ | 
 | 	val = pcmcia_readl(skt, PCMCIA_C1_REG); | 
 | 	if (state->flags & SS_RESET) | 
 | 		val |= PCMCIA_C1_RESET_MASK; | 
 | 	else | 
 | 		val &= ~PCMCIA_C1_RESET_MASK; | 
 |  | 
 | 	/* reverse reset logic for cardbus card */ | 
 | 	if (skt->card_detected && (skt->card_type & CARD_CARDBUS)) | 
 | 		val ^= PCMCIA_C1_RESET_MASK; | 
 |  | 
 | 	pcmcia_writel(skt, val, PCMCIA_C1_REG); | 
 |  | 
 | 	/* keep requested state for event reporting */ | 
 | 	skt->requested_state = *state; | 
 |  | 
 | 	spin_unlock_irqrestore(&skt->lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * identity cardtype from VS[12] input, CD[12] input while only VS2 is | 
 |  * floating, and CD[12] input while only VS1 is floating | 
 |  */ | 
 | enum { | 
 | 	IN_VS1 = (1 << 0), | 
 | 	IN_VS2 = (1 << 1), | 
 | 	IN_CD1_VS2H = (1 << 2), | 
 | 	IN_CD2_VS2H = (1 << 3), | 
 | 	IN_CD1_VS1H = (1 << 4), | 
 | 	IN_CD2_VS1H = (1 << 5), | 
 | }; | 
 |  | 
 | static const u8 vscd_to_cardtype[] = { | 
 |  | 
 | 	/* VS1 float, VS2 float */ | 
 | 	[IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V), | 
 |  | 
 | 	/* VS1 grounded, VS2 float */ | 
 | 	[IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V), | 
 |  | 
 | 	/* VS1 grounded, VS2 grounded */ | 
 | 	[0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV), | 
 |  | 
 | 	/* VS1 tied to CD1, VS2 float */ | 
 | 	[IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V), | 
 |  | 
 | 	/* VS1 grounded, VS2 tied to CD2 */ | 
 | 	[IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV), | 
 |  | 
 | 	/* VS1 tied to CD2, VS2 grounded */ | 
 | 	[IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV), | 
 |  | 
 | 	/* VS1 float, VS2 grounded */ | 
 | 	[IN_VS1] = (CARD_PCCARD | CARD_XV), | 
 |  | 
 | 	/* VS1 float, VS2 tied to CD2 */ | 
 | 	[IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V), | 
 |  | 
 | 	/* VS1 float, VS2 tied to CD1 */ | 
 | 	[IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV), | 
 |  | 
 | 	/* VS1 tied to CD2, VS2 float */ | 
 | 	[IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV), | 
 |  | 
 | 	/* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */ | 
 | 	[IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */ | 
 | }; | 
 |  | 
 | /* | 
 |  * poll hardware to check card insertion status | 
 |  */ | 
 | static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt) | 
 | { | 
 | 	unsigned int stat; | 
 | 	u32 val; | 
 |  | 
 | 	stat = 0; | 
 |  | 
 | 	/* check CD for card presence */ | 
 | 	val = pcmcia_readl(skt, PCMCIA_C1_REG); | 
 |  | 
 | 	if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK)) | 
 | 		stat |= SS_DETECT; | 
 |  | 
 | 	/* if new insertion, detect cardtype */ | 
 | 	if ((stat & SS_DETECT) && !skt->card_detected) { | 
 | 		unsigned int stat = 0; | 
 |  | 
 | 		/* float VS1, float VS2 */ | 
 | 		val |= PCMCIA_C1_VS1OE_MASK; | 
 | 		val |= PCMCIA_C1_VS2OE_MASK; | 
 | 		pcmcia_writel(skt, val, PCMCIA_C1_REG); | 
 |  | 
 | 		/* wait for output to stabilize and read VS[12] */ | 
 | 		udelay(10); | 
 | 		val = pcmcia_readl(skt, PCMCIA_C1_REG); | 
 | 		stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0; | 
 | 		stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0; | 
 |  | 
 | 		/* drive VS1 low, float VS2 */ | 
 | 		val &= ~PCMCIA_C1_VS1OE_MASK; | 
 | 		val |= PCMCIA_C1_VS2OE_MASK; | 
 | 		pcmcia_writel(skt, val, PCMCIA_C1_REG); | 
 |  | 
 | 		/* wait for output to stabilize and read CD[12] */ | 
 | 		udelay(10); | 
 | 		val = pcmcia_readl(skt, PCMCIA_C1_REG); | 
 | 		stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0; | 
 | 		stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0; | 
 |  | 
 | 		/* float VS1, drive VS2 low */ | 
 | 		val |= PCMCIA_C1_VS1OE_MASK; | 
 | 		val &= ~PCMCIA_C1_VS2OE_MASK; | 
 | 		pcmcia_writel(skt, val, PCMCIA_C1_REG); | 
 |  | 
 | 		/* wait for output to stabilize and read CD[12] */ | 
 | 		udelay(10); | 
 | 		val = pcmcia_readl(skt, PCMCIA_C1_REG); | 
 | 		stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0; | 
 | 		stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0; | 
 |  | 
 | 		/* guess cardtype from all this */ | 
 | 		skt->card_type = vscd_to_cardtype[stat]; | 
 | 		if (!skt->card_type) | 
 | 			dev_err(&skt->socket.dev, "unsupported card type\n"); | 
 |  | 
 | 		/* drive both VS pin to 0 again */ | 
 | 		val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK); | 
 |  | 
 | 		/* enable correct logic */ | 
 | 		val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK); | 
 | 		if (skt->card_type & CARD_PCCARD) | 
 | 			val |= PCMCIA_C1_EN_PCMCIA_MASK; | 
 | 		else | 
 | 			val |= PCMCIA_C1_EN_CARDBUS_MASK; | 
 |  | 
 | 		pcmcia_writel(skt, val, PCMCIA_C1_REG); | 
 | 	} | 
 | 	skt->card_detected = (stat & SS_DETECT) ? 1 : 0; | 
 |  | 
 | 	/* report card type/voltage */ | 
 | 	if (skt->card_type & CARD_CARDBUS) | 
 | 		stat |= SS_CARDBUS; | 
 | 	if (skt->card_type & CARD_3V) | 
 | 		stat |= SS_3VCARD; | 
 | 	if (skt->card_type & CARD_XV) | 
 | 		stat |= SS_XVCARD; | 
 | 	stat |= SS_POWERON; | 
 |  | 
 | 	if (gpio_get_value(skt->pd->ready_gpio)) | 
 | 		stat |= SS_READY; | 
 |  | 
 | 	return stat; | 
 | } | 
 |  | 
 | /* | 
 |  * core request to get current socket status | 
 |  */ | 
 | static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock, | 
 | 				     unsigned int *status) | 
 | { | 
 | 	struct bcm63xx_pcmcia_socket *skt; | 
 |  | 
 | 	skt = sock->driver_data; | 
 |  | 
 | 	spin_lock_bh(&skt->lock); | 
 | 	*status = __get_socket_status(skt); | 
 | 	spin_unlock_bh(&skt->lock); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * socket polling timer callback | 
 |  */ | 
 | static void bcm63xx_pcmcia_poll(unsigned long data) | 
 | { | 
 | 	struct bcm63xx_pcmcia_socket *skt; | 
 | 	unsigned int stat, events; | 
 |  | 
 | 	skt = (struct bcm63xx_pcmcia_socket *)data; | 
 |  | 
 | 	spin_lock_bh(&skt->lock); | 
 |  | 
 | 	stat = __get_socket_status(skt); | 
 |  | 
 | 	/* keep only changed bits, and mask with required one from the | 
 | 	 * core */ | 
 | 	events = (stat ^ skt->old_status) & skt->requested_state.csc_mask; | 
 | 	skt->old_status = stat; | 
 | 	spin_unlock_bh(&skt->lock); | 
 |  | 
 | 	if (events) | 
 | 		pcmcia_parse_events(&skt->socket, events); | 
 |  | 
 | 	mod_timer(&skt->timer, | 
 | 		  jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE)); | 
 | } | 
 |  | 
 | static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock, | 
 | 				     struct pccard_io_map *map) | 
 | { | 
 | 	/* this doesn't seem to be called by pcmcia layer if static | 
 | 	 * mapping is used */ | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock, | 
 | 				      struct pccard_mem_map *map) | 
 | { | 
 | 	struct bcm63xx_pcmcia_socket *skt; | 
 | 	struct resource *res; | 
 |  | 
 | 	skt = sock->driver_data; | 
 | 	if (map->flags & MAP_ATTRIB) | 
 | 		res = skt->attr_res; | 
 | 	else | 
 | 		res = skt->common_res; | 
 |  | 
 | 	map->static_start = res->start + map->card_start; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct pccard_operations bcm63xx_pcmcia_operations = { | 
 | 	.init			= bcm63xx_pcmcia_sock_init, | 
 | 	.suspend		= bcm63xx_pcmcia_suspend, | 
 | 	.get_status		= bcm63xx_pcmcia_get_status, | 
 | 	.set_socket		= bcm63xx_pcmcia_set_socket, | 
 | 	.set_io_map		= bcm63xx_pcmcia_set_io_map, | 
 | 	.set_mem_map		= bcm63xx_pcmcia_set_mem_map, | 
 | }; | 
 |  | 
 | /* | 
 |  * register pcmcia socket to core | 
 |  */ | 
 | static int __devinit bcm63xx_drv_pcmcia_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct bcm63xx_pcmcia_socket *skt; | 
 | 	struct pcmcia_socket *sock; | 
 | 	struct resource *res, *irq_res; | 
 | 	unsigned int regmem_size = 0, iomem_size = 0; | 
 | 	u32 val; | 
 | 	int ret; | 
 |  | 
 | 	skt = kzalloc(sizeof(*skt), GFP_KERNEL); | 
 | 	if (!skt) | 
 | 		return -ENOMEM; | 
 | 	spin_lock_init(&skt->lock); | 
 | 	sock = &skt->socket; | 
 | 	sock->driver_data = skt; | 
 |  | 
 | 	/* make sure we have all resources we need */ | 
 | 	skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); | 
 | 	skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2); | 
 | 	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | 
 | 	skt->pd = pdev->dev.platform_data; | 
 | 	if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) { | 
 | 		ret = -EINVAL; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* remap pcmcia registers */ | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	regmem_size = resource_size(res); | 
 | 	if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) { | 
 | 		ret = -EINVAL; | 
 | 		goto err; | 
 | 	} | 
 | 	skt->reg_res = res; | 
 |  | 
 | 	skt->base = ioremap(res->start, regmem_size); | 
 | 	if (!skt->base) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* remap io registers */ | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 3); | 
 | 	iomem_size = resource_size(res); | 
 | 	skt->io_base = ioremap(res->start, iomem_size); | 
 | 	if (!skt->io_base) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* resources are static */ | 
 | 	sock->resource_ops = &pccard_static_ops; | 
 | 	sock->ops = &bcm63xx_pcmcia_operations; | 
 | 	sock->owner = THIS_MODULE; | 
 | 	sock->dev.parent = &pdev->dev; | 
 | 	sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD; | 
 | 	sock->io_offset = (unsigned long)skt->io_base; | 
 | 	sock->pci_irq = irq_res->start; | 
 |  | 
 | #ifdef CONFIG_CARDBUS | 
 | 	sock->cb_dev = bcm63xx_cb_dev; | 
 | 	if (bcm63xx_cb_dev) | 
 | 		sock->features |= SS_CAP_CARDBUS; | 
 | #endif | 
 |  | 
 | 	/* assume common & attribute memory have the same size */ | 
 | 	sock->map_size = resource_size(skt->common_res); | 
 |  | 
 | 	/* initialize polling timer */ | 
 | 	setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt); | 
 |  | 
 | 	/* initialize  pcmcia  control register,  drive  VS[12] to  0, | 
 | 	 * leave CB IDSEL to the old  value since it is set by the PCI | 
 | 	 * layer */ | 
 | 	val = pcmcia_readl(skt, PCMCIA_C1_REG); | 
 | 	val &= PCMCIA_C1_CBIDSEL_MASK; | 
 | 	val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK; | 
 | 	pcmcia_writel(skt, val, PCMCIA_C1_REG); | 
 |  | 
 | 	/* | 
 | 	 * Hardware has only one set of timings registers, not one for | 
 | 	 * each memory access type, so we configure them for the | 
 | 	 * slowest one: attribute memory. | 
 | 	 */ | 
 | 	val = PCMCIA_C2_DATA16_MASK; | 
 | 	val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT; | 
 | 	val |= 6 << PCMCIA_C2_INACTIVE_SHIFT; | 
 | 	val |= 3 << PCMCIA_C2_SETUP_SHIFT; | 
 | 	val |= 3 << PCMCIA_C2_HOLD_SHIFT; | 
 | 	pcmcia_writel(skt, val, PCMCIA_C2_REG); | 
 |  | 
 | 	ret = pcmcia_register_socket(sock); | 
 | 	if (ret) | 
 | 		goto err; | 
 |  | 
 | 	/* start polling socket */ | 
 | 	mod_timer(&skt->timer, | 
 | 		  jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE)); | 
 |  | 
 | 	platform_set_drvdata(pdev, skt); | 
 | 	return 0; | 
 |  | 
 | err: | 
 | 	if (skt->io_base) | 
 | 		iounmap(skt->io_base); | 
 | 	if (skt->base) | 
 | 		iounmap(skt->base); | 
 | 	if (skt->reg_res) | 
 | 		release_mem_region(skt->reg_res->start, regmem_size); | 
 | 	kfree(skt); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int __devexit bcm63xx_drv_pcmcia_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct bcm63xx_pcmcia_socket *skt; | 
 | 	struct resource *res; | 
 |  | 
 | 	skt = platform_get_drvdata(pdev); | 
 | 	del_timer_sync(&skt->timer); | 
 | 	iounmap(skt->base); | 
 | 	iounmap(skt->io_base); | 
 | 	res = skt->reg_res; | 
 | 	release_mem_region(res->start, resource_size(res)); | 
 | 	kfree(skt); | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct platform_driver bcm63xx_pcmcia_driver = { | 
 | 	.probe	= bcm63xx_drv_pcmcia_probe, | 
 | 	.remove	= __devexit_p(bcm63xx_drv_pcmcia_remove), | 
 | 	.driver	= { | 
 | 		.name	= "bcm63xx_pcmcia", | 
 | 		.owner  = THIS_MODULE, | 
 | 	}, | 
 | }; | 
 |  | 
 | #ifdef CONFIG_CARDBUS | 
 | static int __devinit bcm63xx_cb_probe(struct pci_dev *dev, | 
 | 				      const struct pci_device_id *id) | 
 | { | 
 | 	/* keep pci device */ | 
 | 	bcm63xx_cb_dev = dev; | 
 | 	return platform_driver_register(&bcm63xx_pcmcia_driver); | 
 | } | 
 |  | 
 | static void __devexit bcm63xx_cb_exit(struct pci_dev *dev) | 
 | { | 
 | 	platform_driver_unregister(&bcm63xx_pcmcia_driver); | 
 | 	bcm63xx_cb_dev = NULL; | 
 | } | 
 |  | 
 | static struct pci_device_id bcm63xx_cb_table[] = { | 
 | 	{ | 
 | 		.vendor		= PCI_VENDOR_ID_BROADCOM, | 
 | 		.device		= BCM6348_CPU_ID, | 
 | 		.subvendor	= PCI_VENDOR_ID_BROADCOM, | 
 | 		.subdevice	= PCI_ANY_ID, | 
 | 		.class		= PCI_CLASS_BRIDGE_CARDBUS << 8, | 
 | 		.class_mask	= ~0, | 
 | 	}, | 
 |  | 
 | 	{ | 
 | 		.vendor		= PCI_VENDOR_ID_BROADCOM, | 
 | 		.device		= BCM6358_CPU_ID, | 
 | 		.subvendor	= PCI_VENDOR_ID_BROADCOM, | 
 | 		.subdevice	= PCI_ANY_ID, | 
 | 		.class		= PCI_CLASS_BRIDGE_CARDBUS << 8, | 
 | 		.class_mask	= ~0, | 
 | 	}, | 
 |  | 
 | 	{ }, | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table); | 
 |  | 
 | static struct pci_driver bcm63xx_cardbus_driver = { | 
 | 	.name		= "bcm63xx_cardbus", | 
 | 	.id_table	= bcm63xx_cb_table, | 
 | 	.probe		= bcm63xx_cb_probe, | 
 | 	.remove		= __devexit_p(bcm63xx_cb_exit), | 
 | }; | 
 | #endif | 
 |  | 
 | /* | 
 |  * if cardbus support is enabled, register our platform device after | 
 |  * our fake cardbus bridge has been registered | 
 |  */ | 
 | static int __init bcm63xx_pcmcia_init(void) | 
 | { | 
 | #ifdef CONFIG_CARDBUS | 
 | 	return pci_register_driver(&bcm63xx_cardbus_driver); | 
 | #else | 
 | 	return platform_driver_register(&bcm63xx_pcmcia_driver); | 
 | #endif | 
 | } | 
 |  | 
 | static void __exit bcm63xx_pcmcia_exit(void) | 
 | { | 
 | #ifdef CONFIG_CARDBUS | 
 | 	return pci_unregister_driver(&bcm63xx_cardbus_driver); | 
 | #else | 
 | 	platform_driver_unregister(&bcm63xx_pcmcia_driver); | 
 | #endif | 
 | } | 
 |  | 
 | module_init(bcm63xx_pcmcia_init); | 
 | module_exit(bcm63xx_pcmcia_exit); | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>"); | 
 | MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller"); |