|  | /* | 
|  | * Copyright (C) ST-Ericsson AB 2010 | 
|  | * Author:	Sjur Brendeland/sjur.brandeland@stericsson.com | 
|  | * License terms: GNU General Public License (GPL) version 2 | 
|  | */ | 
|  |  | 
|  | #ifndef CFCNFG_H_ | 
|  | #define CFCNFG_H_ | 
|  | #include <linux/spinlock.h> | 
|  | #include <net/caif/caif_layer.h> | 
|  | #include <net/caif/cfctrl.h> | 
|  |  | 
|  | struct cfcnfg; | 
|  |  | 
|  | /** | 
|  | * enum cfcnfg_phy_type -  Types of physical layers defined in CAIF Stack | 
|  | * | 
|  | * @CFPHYTYPE_FRAG:	Fragmented frames physical interface. | 
|  | * @CFPHYTYPE_CAIF:	Generic CAIF physical interface | 
|  | */ | 
|  | enum cfcnfg_phy_type { | 
|  | CFPHYTYPE_FRAG = 1, | 
|  | CFPHYTYPE_CAIF, | 
|  | CFPHYTYPE_MAX | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * enum cfcnfg_phy_preference - Physical preference HW Abstraction | 
|  | * | 
|  | * @CFPHYPREF_UNSPECIFIED:	Default physical interface | 
|  | * | 
|  | * @CFPHYPREF_LOW_LAT:		Default physical interface for low-latency | 
|  | *				traffic | 
|  | * @CFPHYPREF_HIGH_BW:		Default physical interface for high-bandwidth | 
|  | *				traffic | 
|  | * @CFPHYPREF_LOOP:		TEST only Loopback interface simulating modem | 
|  | *				responses. | 
|  | * | 
|  | */ | 
|  | enum cfcnfg_phy_preference { | 
|  | CFPHYPREF_UNSPECIFIED, | 
|  | CFPHYPREF_LOW_LAT, | 
|  | CFPHYPREF_HIGH_BW, | 
|  | CFPHYPREF_LOOP | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * cfcnfg_create() - Create the CAIF configuration object. | 
|  | */ | 
|  | struct cfcnfg *cfcnfg_create(void); | 
|  |  | 
|  | /** | 
|  | * cfcnfg_remove() -  Remove the CFCNFG object | 
|  | * @cfg: config object | 
|  | */ | 
|  | void cfcnfg_remove(struct cfcnfg *cfg); | 
|  |  | 
|  | /** | 
|  | * cfcnfg_add_phy_layer() - Adds a physical layer to the CAIF stack. | 
|  | * @cnfg:	Pointer to a CAIF configuration object, created by | 
|  | *		cfcnfg_create(). | 
|  | * @phy_type:	Specifies the type of physical interface, e.g. | 
|  | *			CFPHYTYPE_FRAG. | 
|  | * @dev:	Pointer to link layer device | 
|  | * @phy_layer:	Specify the physical layer. The transmit function | 
|  | *		MUST be set in the structure. | 
|  | * @phyid:	The assigned physical ID for this layer, used in | 
|  | *		cfcnfg_add_adapt_layer to specify PHY for the link. | 
|  | * @pref:	The phy (link layer) preference. | 
|  | * @fcs:	Specify if checksum is used in CAIF Framing Layer. | 
|  | * @stx:	Specify if Start Of Frame eXtention is used. | 
|  | */ | 
|  |  | 
|  | void | 
|  | cfcnfg_add_phy_layer(struct cfcnfg *cnfg, enum cfcnfg_phy_type phy_type, | 
|  | void *dev, struct cflayer *phy_layer, u16 *phyid, | 
|  | enum cfcnfg_phy_preference pref, | 
|  | bool fcs, bool stx); | 
|  |  | 
|  | /** | 
|  | * cfcnfg_del_phy_layer - Deletes an phy layer from the CAIF stack. | 
|  | * | 
|  | * @cnfg:	Pointer to a CAIF configuration object, created by | 
|  | *		cfcnfg_create(). | 
|  | * @phy_layer:	Adaptation layer to be removed. | 
|  | */ | 
|  | int cfcnfg_del_phy_layer(struct cfcnfg *cnfg, struct cflayer *phy_layer); | 
|  |  | 
|  | /** | 
|  | * cfcnfg_disconn_adapt_layer - Disconnects an adaptation layer. | 
|  | * | 
|  | * @cnfg:	Pointer to a CAIF configuration object, created by | 
|  | *		cfcnfg_create(). | 
|  | * @adap_layer: Adaptation layer to be removed. | 
|  | */ | 
|  | int cfcnfg_disconn_adapt_layer(struct cfcnfg *cnfg, | 
|  | struct cflayer *adap_layer); | 
|  |  | 
|  | /** | 
|  | * cfcnfg_release_adap_layer - Used by client to release the adaptation layer. | 
|  | * | 
|  | * @adap_layer: Adaptation layer. | 
|  | */ | 
|  | void cfcnfg_release_adap_layer(struct cflayer *adap_layer); | 
|  |  | 
|  | /** | 
|  | * cfcnfg_add_adaptation_layer - Add an adaptation layer to the CAIF stack. | 
|  | * | 
|  | * The adaptation Layer is where the interface to application or higher-level | 
|  | * driver functionality is implemented. | 
|  | * | 
|  | * @cnfg:		Pointer to a CAIF configuration object, created by | 
|  | *			cfcnfg_create(). | 
|  | * @param:		Link setup parameters. | 
|  | * @adap_layer:		Specify the adaptation layer; the receive and | 
|  | *			flow-control functions MUST be set in the structure. | 
|  | * | 
|  | */ | 
|  | int cfcnfg_add_adaptation_layer(struct cfcnfg *cnfg, | 
|  | struct cfctrl_link_param *param, | 
|  | struct cflayer *adap_layer); | 
|  |  | 
|  | /** | 
|  | * cfcnfg_get_phyid() - Get physical ID, given type. | 
|  | * Returns one of the physical interfaces matching the given type. | 
|  | * Zero if no match is found. | 
|  | * @cnfg:	Configuration object | 
|  | * @phy_pref:	Caif Link Layer preference | 
|  | */ | 
|  | struct dev_info *cfcnfg_get_phyid(struct cfcnfg *cnfg, | 
|  | enum cfcnfg_phy_preference phy_pref); | 
|  |  | 
|  | /** | 
|  | * cfcnfg_get_named() - Get the Physical Identifier of CAIF Link Layer | 
|  | * @cnfg:	Configuration object | 
|  | * @name:	Name of the Physical Layer (Caif Link Layer) | 
|  | */ | 
|  | int cfcnfg_get_named(struct cfcnfg *cnfg, char *name); | 
|  |  | 
|  | #endif				/* CFCNFG_H_ */ |