| /* | 
 |  * GPIO Chip driver for Analog Devices | 
 |  * ADP5588 I/O Expander and QWERTY Keypad Controller | 
 |  * | 
 |  * Copyright 2009 Analog Devices Inc. | 
 |  * | 
 |  * Licensed under the GPL-2 or later. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/init.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/gpio.h> | 
 |  | 
 | #include <linux/i2c/adp5588.h> | 
 |  | 
 | #define DRV_NAME		"adp5588-gpio" | 
 | #define MAXGPIO			18 | 
 | #define ADP_BANK(offs)		((offs) >> 3) | 
 | #define ADP_BIT(offs)		(1u << ((offs) & 0x7)) | 
 |  | 
 | struct adp5588_gpio { | 
 | 	struct i2c_client *client; | 
 | 	struct gpio_chip gpio_chip; | 
 | 	struct mutex lock;	/* protect cached dir, dat_out */ | 
 | 	unsigned gpio_start; | 
 | 	uint8_t dat_out[3]; | 
 | 	uint8_t dir[3]; | 
 | }; | 
 |  | 
 | static int adp5588_gpio_read(struct i2c_client *client, u8 reg) | 
 | { | 
 | 	int ret = i2c_smbus_read_byte_data(client, reg); | 
 |  | 
 | 	if (ret < 0) | 
 | 		dev_err(&client->dev, "Read Error\n"); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int adp5588_gpio_write(struct i2c_client *client, u8 reg, u8 val) | 
 | { | 
 | 	int ret = i2c_smbus_write_byte_data(client, reg, val); | 
 |  | 
 | 	if (ret < 0) | 
 | 		dev_err(&client->dev, "Write Error\n"); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off) | 
 | { | 
 | 	struct adp5588_gpio *dev = | 
 | 	    container_of(chip, struct adp5588_gpio, gpio_chip); | 
 |  | 
 | 	return !!(adp5588_gpio_read(dev->client, GPIO_DAT_STAT1 + ADP_BANK(off)) | 
 | 		  & ADP_BIT(off)); | 
 | } | 
 |  | 
 | static void adp5588_gpio_set_value(struct gpio_chip *chip, | 
 | 				   unsigned off, int val) | 
 | { | 
 | 	unsigned bank, bit; | 
 | 	struct adp5588_gpio *dev = | 
 | 	    container_of(chip, struct adp5588_gpio, gpio_chip); | 
 |  | 
 | 	bank = ADP_BANK(off); | 
 | 	bit = ADP_BIT(off); | 
 |  | 
 | 	mutex_lock(&dev->lock); | 
 | 	if (val) | 
 | 		dev->dat_out[bank] |= bit; | 
 | 	else | 
 | 		dev->dat_out[bank] &= ~bit; | 
 |  | 
 | 	adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank, | 
 | 			   dev->dat_out[bank]); | 
 | 	mutex_unlock(&dev->lock); | 
 | } | 
 |  | 
 | static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off) | 
 | { | 
 | 	int ret; | 
 | 	unsigned bank; | 
 | 	struct adp5588_gpio *dev = | 
 | 	    container_of(chip, struct adp5588_gpio, gpio_chip); | 
 |  | 
 | 	bank = ADP_BANK(off); | 
 |  | 
 | 	mutex_lock(&dev->lock); | 
 | 	dev->dir[bank] &= ~ADP_BIT(off); | 
 | 	ret = adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, dev->dir[bank]); | 
 | 	mutex_unlock(&dev->lock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int adp5588_gpio_direction_output(struct gpio_chip *chip, | 
 | 					 unsigned off, int val) | 
 | { | 
 | 	int ret; | 
 | 	unsigned bank, bit; | 
 | 	struct adp5588_gpio *dev = | 
 | 	    container_of(chip, struct adp5588_gpio, gpio_chip); | 
 |  | 
 | 	bank = ADP_BANK(off); | 
 | 	bit = ADP_BIT(off); | 
 |  | 
 | 	mutex_lock(&dev->lock); | 
 | 	dev->dir[bank] |= bit; | 
 |  | 
 | 	if (val) | 
 | 		dev->dat_out[bank] |= bit; | 
 | 	else | 
 | 		dev->dat_out[bank] &= ~bit; | 
 |  | 
 | 	ret = adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank, | 
 | 				 dev->dat_out[bank]); | 
 | 	ret |= adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, | 
 | 				 dev->dir[bank]); | 
 | 	mutex_unlock(&dev->lock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int __devinit adp5588_gpio_probe(struct i2c_client *client, | 
 | 					const struct i2c_device_id *id) | 
 | { | 
 | 	struct adp5588_gpio_platform_data *pdata = client->dev.platform_data; | 
 | 	struct adp5588_gpio *dev; | 
 | 	struct gpio_chip *gc; | 
 | 	int ret, i, revid; | 
 |  | 
 | 	if (pdata == NULL) { | 
 | 		dev_err(&client->dev, "missing platform data\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	if (!i2c_check_functionality(client->adapter, | 
 | 					I2C_FUNC_SMBUS_BYTE_DATA)) { | 
 | 		dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	dev = kzalloc(sizeof(*dev), GFP_KERNEL); | 
 | 	if (dev == NULL) { | 
 | 		dev_err(&client->dev, "failed to alloc memory\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	dev->client = client; | 
 |  | 
 | 	gc = &dev->gpio_chip; | 
 | 	gc->direction_input = adp5588_gpio_direction_input; | 
 | 	gc->direction_output = adp5588_gpio_direction_output; | 
 | 	gc->get = adp5588_gpio_get_value; | 
 | 	gc->set = adp5588_gpio_set_value; | 
 | 	gc->can_sleep = 1; | 
 |  | 
 | 	gc->base = pdata->gpio_start; | 
 | 	gc->ngpio = MAXGPIO; | 
 | 	gc->label = client->name; | 
 | 	gc->owner = THIS_MODULE; | 
 |  | 
 | 	mutex_init(&dev->lock); | 
 |  | 
 |  | 
 | 	ret = adp5588_gpio_read(dev->client, DEV_ID); | 
 | 	if (ret < 0) | 
 | 		goto err; | 
 |  | 
 | 	revid = ret & ADP5588_DEVICE_ID_MASK; | 
 |  | 
 | 	for (i = 0, ret = 0; i <= ADP_BANK(MAXGPIO); i++) { | 
 | 		dev->dat_out[i] = adp5588_gpio_read(client, GPIO_DAT_OUT1 + i); | 
 | 		dev->dir[i] = adp5588_gpio_read(client, GPIO_DIR1 + i); | 
 | 		ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0); | 
 | 		ret |= adp5588_gpio_write(client, GPIO_PULL1 + i, | 
 | 				(pdata->pullup_dis_mask >> (8 * i)) & 0xFF); | 
 |  | 
 | 		if (ret) | 
 | 			goto err; | 
 | 	} | 
 |  | 
 | 	ret = gpiochip_add(&dev->gpio_chip); | 
 | 	if (ret) | 
 | 		goto err; | 
 |  | 
 | 	dev_info(&client->dev, "gpios %d..%d on a %s Rev. %d\n", | 
 | 			gc->base, gc->base + gc->ngpio - 1, | 
 | 			client->name, revid); | 
 |  | 
 | 	if (pdata->setup) { | 
 | 		ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context); | 
 | 		if (ret < 0) | 
 | 			dev_warn(&client->dev, "setup failed, %d\n", ret); | 
 | 	} | 
 |  | 
 | 	i2c_set_clientdata(client, dev); | 
 | 	return 0; | 
 |  | 
 | err: | 
 | 	kfree(dev); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int __devexit adp5588_gpio_remove(struct i2c_client *client) | 
 | { | 
 | 	struct adp5588_gpio_platform_data *pdata = client->dev.platform_data; | 
 | 	struct adp5588_gpio *dev = i2c_get_clientdata(client); | 
 | 	int ret; | 
 |  | 
 | 	if (pdata->teardown) { | 
 | 		ret = pdata->teardown(client, | 
 | 				      dev->gpio_chip.base, dev->gpio_chip.ngpio, | 
 | 				      pdata->context); | 
 | 		if (ret < 0) { | 
 | 			dev_err(&client->dev, "teardown failed %d\n", ret); | 
 | 			return ret; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	ret = gpiochip_remove(&dev->gpio_chip); | 
 | 	if (ret) { | 
 | 		dev_err(&client->dev, "gpiochip_remove failed %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	kfree(dev); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct i2c_device_id adp5588_gpio_id[] = { | 
 | 	{DRV_NAME, 0}, | 
 | 	{} | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(i2c, adp5588_gpio_id); | 
 |  | 
 | static struct i2c_driver adp5588_gpio_driver = { | 
 | 	.driver = { | 
 | 		   .name = DRV_NAME, | 
 | 		   }, | 
 | 	.probe = adp5588_gpio_probe, | 
 | 	.remove = __devexit_p(adp5588_gpio_remove), | 
 | 	.id_table = adp5588_gpio_id, | 
 | }; | 
 |  | 
 | static int __init adp5588_gpio_init(void) | 
 | { | 
 | 	return i2c_add_driver(&adp5588_gpio_driver); | 
 | } | 
 |  | 
 | module_init(adp5588_gpio_init); | 
 |  | 
 | static void __exit adp5588_gpio_exit(void) | 
 | { | 
 | 	i2c_del_driver(&adp5588_gpio_driver); | 
 | } | 
 |  | 
 | module_exit(adp5588_gpio_exit); | 
 |  | 
 | MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); | 
 | MODULE_DESCRIPTION("GPIO ADP5588 Driver"); | 
 | MODULE_LICENSE("GPL"); |