| # |
| # Makefile for the linux kernel. |
| # |
| |
| # Common support |
| obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ |
| common.o gpio.o dma.o wd_timer.o display.o |
| |
| omap-2-3-common = irq.o sdrc.o |
| hwmod-common = omap_hwmod.o \ |
| omap_hwmod_common_data.o |
| clock-common = clock.o clock_common_data.o \ |
| clkt_dpll.o clkt_clksel.o |
| secure-common = omap-smc.o omap-secure.o |
| |
| obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common) |
| obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) |
| obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) |
| |
| obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o |
| |
| obj-$(CONFIG_TWL4030_CORE) += omap_twl.o |
| |
| # SMP support ONLY available for OMAP4 |
| obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o |
| obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o |
| obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o |
| obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o \ |
| sleep44xx.o |
| |
| plus_sec := $(call as-instr,.arch_extension sec,+sec) |
| AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) |
| AFLAGS_omap-smc.o :=-Wa,-march=armv7-a$(plus_sec) |
| AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec) |
| |
| # Functions loaded to SRAM |
| obj-$(CONFIG_SOC_OMAP2420) += sram242x.o |
| obj-$(CONFIG_SOC_OMAP2430) += sram243x.o |
| obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o |
| |
| AFLAGS_sram242x.o :=-Wa,-march=armv6 |
| AFLAGS_sram243x.o :=-Wa,-march=armv6 |
| AFLAGS_sram34xx.o :=-Wa,-march=armv7-a |
| |
| # Pin multiplexing |
| obj-$(CONFIG_SOC_OMAP2420) += mux2420.o |
| obj-$(CONFIG_SOC_OMAP2430) += mux2430.o |
| obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o |
| obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o |
| |
| # SMS/SDRC |
| obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o |
| # obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o |
| |
| # OPP table initialization |
| ifeq ($(CONFIG_PM_OPP),y) |
| obj-y += opp.o |
| obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o |
| obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o |
| endif |
| |
| # Power Management |
| ifeq ($(CONFIG_PM),y) |
| obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o |
| obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o |
| obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \ |
| cpuidle34xx.o |
| obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o \ |
| cpuidle44xx.o |
| obj-$(CONFIG_PM_DEBUG) += pm-debug.o |
| obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o |
| obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o |
| |
| AFLAGS_sleep24xx.o :=-Wa,-march=armv6 |
| AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) |
| |
| ifeq ($(CONFIG_PM_VERBOSE),y) |
| CFLAGS_pm_bus.o += -DDEBUG |
| endif |
| |
| endif |
| |
| # PRCM |
| obj-y += prm_common.o |
| obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o |
| obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \ |
| vc3xxx_data.o vp3xxx_data.o |
| # XXX The presence of cm2xxx_3xxx.o on the line below is temporary and |
| # will be removed once the OMAP4 part of the codebase is converted to |
| # use OMAP4-specific PRCM functions. |
| obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \ |
| cm44xx.o prcm_mpu44xx.o \ |
| prminst44xx.o vc44xx_data.o \ |
| vp44xx_data.o prm44xx.o |
| |
| # OMAP voltage domains |
| voltagedomain-common := voltage.o vc.o vp.o |
| obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \ |
| voltagedomains2xxx_data.o |
| obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \ |
| voltagedomains3xxx_data.o |
| obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \ |
| voltagedomains44xx_data.o |
| |
| # OMAP powerdomain framework |
| powerdomain-common += powerdomain.o powerdomain-common.o |
| obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) \ |
| powerdomain2xxx_3xxx.o \ |
| powerdomains2xxx_data.o \ |
| powerdomains2xxx_3xxx_data.o |
| obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) \ |
| powerdomain2xxx_3xxx.o \ |
| powerdomains3xxx_data.o \ |
| powerdomains2xxx_3xxx_data.o |
| obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \ |
| powerdomain44xx.o \ |
| powerdomains44xx_data.o |
| |
| # PRCM clockdomain control |
| obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \ |
| clockdomain2xxx_3xxx.o \ |
| clockdomains2xxx_3xxx_data.o |
| obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o |
| obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o |
| obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \ |
| clockdomain2xxx_3xxx.o \ |
| clockdomains2xxx_3xxx_data.o \ |
| clockdomains3xxx_data.o |
| obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \ |
| clockdomain44xx.o \ |
| clockdomains44xx_data.o |
| |
| # Clock framework |
| obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \ |
| clkt2xxx_sys.o \ |
| clkt2xxx_dpllcore.o \ |
| clkt2xxx_virt_prcm_set.o \ |
| clkt2xxx_apll.o clkt2xxx_osc.o \ |
| clkt2xxx_dpll.o clkt_iclk.o |
| obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o |
| obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o |
| obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \ |
| clock34xx.o clkt34xx_dpll3m2.o \ |
| clock3517.o clock36xx.o \ |
| dpll3xxx.o clock3xxx_data.o \ |
| clkt_iclk.o |
| obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \ |
| dpll3xxx.o dpll44xx.o |
| |
| # OMAP2 clock rate set data (old "OPP" data) |
| obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o |
| obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o |
| |
| # hwmod data |
| obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o \ |
| omap_hwmod_2xxx_3xxx_ipblock_data.o \ |
| omap_hwmod_2xxx_interconnect_data.o \ |
| omap_hwmod_2xxx_3xxx_interconnect_data.o \ |
| omap_hwmod_2420_data.o |
| obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o \ |
| omap_hwmod_2xxx_3xxx_ipblock_data.o \ |
| omap_hwmod_2xxx_interconnect_data.o \ |
| omap_hwmod_2xxx_3xxx_interconnect_data.o \ |
| omap_hwmod_2430_data.o |
| obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o \ |
| omap_hwmod_2xxx_3xxx_interconnect_data.o \ |
| omap_hwmod_3xxx_data.o |
| obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o |
| |
| # EMU peripherals |
| obj-$(CONFIG_OMAP3_EMU) += emu.o |
| |
| # L3 interconnect |
| obj-$(CONFIG_ARCH_OMAP3) += omap_l3_smx.o |
| obj-$(CONFIG_ARCH_OMAP4) += omap_l3_noc.o |
| |
| obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o |
| mailbox_mach-objs := mailbox.o |
| |
| obj-$(CONFIG_OMAP_IOMMU) += iommu2.o |
| |
| iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o |
| obj-y += $(iommu-m) $(iommu-y) |
| |
| i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o |
| obj-y += $(i2c-omap-m) $(i2c-omap-y) |
| |
| ifneq ($(CONFIG_TIDSPBRIDGE),) |
| obj-y += dsp.o |
| endif |
| |
| # Specific board support |
| obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o |
| obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o |
| obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o |
| obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o |
| obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o |
| obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o |
| obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o |
| obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o |
| obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o |
| obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o |
| obj-$(CONFIG_MACH_OVERO) += board-overo.o |
| obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o |
| obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o |
| obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o |
| obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o |
| obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \ |
| sdram-nokia.o |
| obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ |
| sdram-nokia.o \ |
| board-rx51-peripherals.o \ |
| board-rx51-video.o |
| obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \ |
| board-zoom-peripherals.o \ |
| board-zoom-display.o \ |
| board-zoom-debugboard.o |
| obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \ |
| board-zoom-peripherals.o \ |
| board-zoom-display.o \ |
| board-zoom-debugboard.o |
| obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \ |
| board-zoom-peripherals.o \ |
| board-zoom-display.o |
| obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o |
| obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o |
| obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o |
| obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o |
| obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o |
| obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o |
| |
| obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o |
| |
| obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o |
| |
| obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o |
| |
| obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o |
| obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o |
| obj-$(CONFIG_MACH_TI8148EVM) += board-ti8168evm.o |
| |
| # Platform specific device init code |
| |
| omap-flash-$(CONFIG_MTD_NAND_OMAP2) := board-flash.o |
| omap-flash-$(CONFIG_MTD_ONENAND_OMAP2) := board-flash.o |
| obj-y += $(omap-flash-y) $(omap-flash-m) |
| |
| omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o |
| obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y) |
| |
| |
| usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o |
| obj-y += $(usbfs-m) $(usbfs-y) |
| obj-y += usb-musb.o |
| obj-y += omap_phy_internal.o |
| |
| obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o |
| obj-y += usb-host.o |
| |
| onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o |
| obj-y += $(onenand-m) $(onenand-y) |
| |
| nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o |
| obj-y += $(nand-m) $(nand-y) |
| |
| smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o |
| obj-y += $(smc91x-m) $(smc91x-y) |
| |
| smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o |
| obj-y += $(smsc911x-m) $(smsc911x-y) |
| obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o |
| |
| obj-y += common-board-devices.o twl-common.o |