[ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories
Now that Linux includes support for the Atmel AT91SAM9260 and
AT91SAM9261 processors in addition to the original Atmel AT91RM9200
(with support for more AT91 processors pending), the "mach-at91rm9200"
and "arch-at91rm9200" directories should be renamed to indicate their
more generic nature.
The following git commands should be run BEFORE applying this patch:
git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91
git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/include/asm-arm/arch-at91/at91_dbgu.h b/include/asm-arm/arch-at91/at91_dbgu.h
new file mode 100644
index 0000000..1002a80
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_dbgu.h
@@ -0,0 +1,45 @@
+/*
+ * include/asm-arm/arch-at91/at91_dbgu.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Debug Unit (DBGU) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_DBGU_H
+#define AT91_DBGU_H
+
+#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */
+#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */
+#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */
+#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
+#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
+#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */
+#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */
+#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */
+#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */
+#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */
+#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */
+
+#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */
+#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */
+#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */
+#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */
+#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */
+#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */
+#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */
+#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */
+#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */
+#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */
+
+#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */
+#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */
+
+#endif