sh: Mass ctrl_in/outX to __raw_read/writeX conversion.
The old ctrl in/out routines are non-portable and unsuitable for
cross-platform use. While drivers/sh has already been sanitized, there
is still quite a lot of code that is not. This converts the arch/sh/ bits
over, which permits us to flag the routines as deprecated whilst still
building with -Werror for the architecture code, and to ensure that
future users are not added.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c
index 5e22689..72622e3 100644
--- a/arch/sh/drivers/dma/dmabrg.c
+++ b/arch/sh/drivers/dma/dmabrg.c
@@ -86,8 +86,8 @@
unsigned long dcr;
unsigned int i;
- dcr = ctrl_inl(DMABRGCR);
- ctrl_outl(dcr & ~0x00ff0003, DMABRGCR); /* ack all */
+ dcr = __raw_readl(DMABRGCR);
+ __raw_writel(dcr & ~0x00ff0003, DMABRGCR); /* ack all */
dcr &= dcr >> 8; /* ignore masked */
/* USB stuff, get it out of the way first */
@@ -109,17 +109,17 @@
static void dmabrg_disable_irq(unsigned int dmairq)
{
unsigned long dcr;
- dcr = ctrl_inl(DMABRGCR);
+ dcr = __raw_readl(DMABRGCR);
dcr &= ~(1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
- ctrl_outl(dcr, DMABRGCR);
+ __raw_writel(dcr, DMABRGCR);
}
static void dmabrg_enable_irq(unsigned int dmairq)
{
unsigned long dcr;
- dcr = ctrl_inl(DMABRGCR);
+ dcr = __raw_readl(DMABRGCR);
dcr |= (1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
- ctrl_outl(dcr, DMABRGCR);
+ __raw_writel(dcr, DMABRGCR);
}
int dmabrg_request_irq(unsigned int dmairq, void(*handler)(void*),
@@ -165,13 +165,13 @@
printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n");
#endif
- ctrl_outl(0, DMABRGCR);
- ctrl_outl(0, DMACHCR0);
- ctrl_outl(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */
+ __raw_writel(0, DMABRGCR);
+ __raw_writel(0, DMACHCR0);
+ __raw_writel(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */
/* enable DMABRG mode, enable the DMAC */
- or = ctrl_inl(DMAOR);
- ctrl_outl(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
+ or = __raw_readl(DMAOR);
+ __raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
ret = request_irq(DMABRGI0, dmabrg_irq, IRQF_DISABLED,
"DMABRG USB address error", NULL);