sh: Mass ctrl_in/outX to __raw_read/writeX conversion.
The old ctrl in/out routines are non-portable and unsuitable for
cross-platform use. While drivers/sh has already been sanitized, there
is still quite a lot of code that is not. This converts the arch/sh/ bits
over, which permits us to flag the routines as deprecated whilst still
building with -Werror for the architecture code, and to ensure that
future users are not added.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
index 70c1999..2455cf3 100644
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ b/arch/sh/drivers/pci/pci-sh7751.c
@@ -97,9 +97,9 @@
return ret;
/* Set the BCR's to enable PCI access */
- reg = ctrl_inl(SH7751_BCR1);
+ reg = __raw_readl(SH7751_BCR1);
reg |= 0x80000;
- ctrl_outl(reg, SH7751_BCR1);
+ __raw_writel(reg, SH7751_BCR1);
/* Turn the clocks back on (not done in reset)*/
pci_write_reg(chan, 0, SH4_PCICLKR);
@@ -159,13 +159,13 @@
return -1;
/* configure the wait control registers */
- word = ctrl_inl(SH7751_WCR1);
+ word = __raw_readl(SH7751_WCR1);
pci_write_reg(chan, word, SH4_PCIWCR1);
- word = ctrl_inl(SH7751_WCR2);
+ word = __raw_readl(SH7751_WCR2);
pci_write_reg(chan, word, SH4_PCIWCR2);
- word = ctrl_inl(SH7751_WCR3);
+ word = __raw_readl(SH7751_WCR3);
pci_write_reg(chan, word, SH4_PCIWCR3);
- word = ctrl_inl(SH7751_MCR);
+ word = __raw_readl(SH7751_MCR);
pci_write_reg(chan, word, SH4_PCIMCR);
/* NOTE: I'm ignoring the PCI error IRQs for now..