iwlwifi: move hw_params into priv
The hw_params are mostly values that are
derived from the actual hardware config.
As such, while it is possible that MVM
will require similar ones, it makes more
sense -- at least for now -- to put them
into the DVM struct.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 9f379d3..8870370 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -145,45 +145,45 @@
s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY) -
iwl_temp_calib_to_offset(priv->shrd);
- hw_params(priv).ct_kill_threshold = threshold * volt2temp_coef;
+ priv->hw_params.ct_kill_threshold = threshold * volt2temp_coef;
}
static void iwl5000_set_ct_threshold(struct iwl_priv *priv)
{
/* want Celsius */
- hw_params(priv).ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
+ priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
}
static void iwl5000_hw_set_hw_params(struct iwl_priv *priv)
{
- hw_params(priv).ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
+ priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
BIT(IEEE80211_BAND_5GHZ);
- hw_params(priv).tx_chains_num =
- num_of_ant(hw_params(priv).valid_tx_ant);
- hw_params(priv).rx_chains_num =
- num_of_ant(hw_params(priv).valid_rx_ant);
+ priv->hw_params.tx_chains_num =
+ num_of_ant(priv->hw_params.valid_tx_ant);
+ priv->hw_params.rx_chains_num =
+ num_of_ant(priv->hw_params.valid_rx_ant);
iwl5000_set_ct_threshold(priv);
/* Set initial sensitivity parameters */
- hw_params(priv).sens = &iwl5000_sensitivity;
+ priv->hw_params.sens = &iwl5000_sensitivity;
}
static void iwl5150_hw_set_hw_params(struct iwl_priv *priv)
{
- hw_params(priv).ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
+ priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
BIT(IEEE80211_BAND_5GHZ);
- hw_params(priv).tx_chains_num =
- num_of_ant(hw_params(priv).valid_tx_ant);
- hw_params(priv).rx_chains_num =
- num_of_ant(hw_params(priv).valid_rx_ant);
+ priv->hw_params.tx_chains_num =
+ num_of_ant(priv->hw_params.valid_tx_ant);
+ priv->hw_params.rx_chains_num =
+ num_of_ant(priv->hw_params.valid_rx_ant);
iwl5150_set_ct_threshold(priv);
/* Set initial sensitivity parameters */
- hw_params(priv).sens = &iwl5150_sensitivity;
+ priv->hw_params.sens = &iwl5150_sensitivity;
}
static void iwl5150_temperature(struct iwl_priv *priv)