ARM: at91: fix usart/uart namimg in pinctrl
USART are the full pin uart
DBGU the debug Unit
UART the two pin uart
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 9fd7159..9dac006 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -126,36 +126,36 @@
};
};
- uart0 {
- pinctrl_uart0: uart0-0 {
+ usart0 {
+ pinctrl_usart0: usart0-0 {
atmel,pins =
<0 0 0x1 0x1 /* PA0 periph A with pullup */
0 1 0x1 0x0>; /* PA1 periph A */
};
- pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+ pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
atmel,pins =
<0 2 0x1 0x0 /* PA2 periph A */
0 3 0x1 0x0>; /* PA3 periph A */
};
};
- uart1 {
- pinctrl_uart1: uart1-0 {
+ usart1 {
+ pinctrl_usart1: usart1-0 {
atmel,pins =
<0 5 0x1 0x1 /* PA5 periph A with pullup */
0 6 0x1 0x0>; /* PA6 periph A */
};
- pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+ pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
atmel,pins =
<3 27 0x3 0x0 /* PC27 periph C */
3 28 0x3 0x0>; /* PC28 periph C */
};
};
- uart2 {
- pinctrl_uart2: uart2-0 {
+ usart2 {
+ pinctrl_usart2: usart2-0 {
atmel,pins =
<0 7 0x1 0x1 /* PA7 periph A with pullup */
0 8 0x1 0x0>; /* PA8 periph A */
@@ -168,30 +168,30 @@
};
};
- uart3 {
- pinctrl_uart3: uart3-0 {
+ usart3 {
+ pinctrl_uart3: usart3-0 {
atmel,pins =
<3 23 0x2 0x1 /* PC22 periph B with pullup */
3 23 0x2 0x0>; /* PC23 periph B */
};
- pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+ pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
atmel,pins =
<3 24 0x2 0x0 /* PC24 periph B */
3 25 0x2 0x0>; /* PC25 periph B */
};
};
- usart0 {
- pinctrl_usart0: usart0-0 {
+ uart0 {
+ pinctrl_uart0: uart0-0 {
atmel,pins =
<3 8 0x3 0x0 /* PC8 periph C */
3 9 0x3 0x1>; /* PC9 periph C with pullup */
};
};
- usart1 {
- pinctrl_usart1: usart1-0 {
+ uart1 {
+ pinctrl_uart1: uart1-0 {
atmel,pins =
<3 16 0x3 0x0 /* PC16 periph C */
3 17 0x3 0x1>; /* PC17 periph C with pullup */
@@ -293,7 +293,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
@@ -304,7 +304,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
@@ -315,7 +315,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};