[SCSI] aci94xx: implement link rate setting
This patch implements the ability to set the minimum and maximum
linkrates for both libsas (for expanders) and aic94xx (for the host
phys). It also tidies up the setting of the hardware min and max to
make sure they're updated when the expander emits a change broadcast.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 02e796e..30b8014 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -187,10 +187,10 @@
phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
phy->phy->identify.target_port_protocols = phy->attached_tproto;
phy->phy->identify.phy_identifier = phy_id;
- phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
- phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
- phy->phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
- phy->phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
+ phy->phy->minimum_linkrate_hw = dr->hmin_linkrate;
+ phy->phy->maximum_linkrate_hw = dr->hmax_linkrate;
+ phy->phy->minimum_linkrate = dr->pmin_linkrate;
+ phy->phy->maximum_linkrate = dr->pmax_linkrate;
phy->phy->negotiated_linkrate = phy->linkrate;
if (!rediscover)
@@ -404,7 +404,8 @@
#define PC_RESP_SIZE 8
int sas_smp_phy_control(struct domain_device *dev, int phy_id,
- enum phy_func phy_func)
+ enum phy_func phy_func,
+ struct sas_phy_linkrates *rates)
{
u8 *pc_req;
u8 *pc_resp;
@@ -423,6 +424,10 @@
pc_req[1] = SMP_PHY_CONTROL;
pc_req[9] = phy_id;
pc_req[10]= phy_func;
+ if (rates) {
+ pc_req[32] = rates->minimum_linkrate << 4;
+ pc_req[33] = rates->maximum_linkrate << 4;
+ }
res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE);
@@ -436,7 +441,7 @@
struct expander_device *ex = &dev->ex_dev;
struct ex_phy *phy = &ex->ex_phy[phy_id];
- sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE);
+ sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE, NULL);
phy->linkrate = SAS_PHY_DISABLED;
}
@@ -731,7 +736,7 @@
/* Phy state */
if (ex_phy->linkrate == SAS_SATA_SPINUP_HOLD) {
- if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET))
+ if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET, NULL))
res = sas_ex_phy_discover(dev, phy_id);
if (res)
return res;
@@ -1706,6 +1711,7 @@
SAS_ADDR(phy->attached_sas_addr)) {
SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n",
SAS_ADDR(dev->sas_addr), phy_id);
+ sas_ex_phy_discover(dev, phy_id);
} else
res = sas_discover_new(dev, phy_id);
out: