| /* | 
 |  *  linux/arch/m68k/mm/fault.c | 
 |  * | 
 |  *  Copyright (C) 1995  Hamish Macdonald | 
 |  */ | 
 |  | 
 | #include <linux/mman.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/ptrace.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/module.h> | 
 |  | 
 | #include <asm/setup.h> | 
 | #include <asm/traps.h> | 
 | #include <asm/system.h> | 
 | #include <asm/uaccess.h> | 
 | #include <asm/pgalloc.h> | 
 |  | 
 | extern void die_if_kernel(char *, struct pt_regs *, long); | 
 | extern const int frame_extra_sizes[]; /* in m68k/kernel/signal.c */ | 
 |  | 
 | int send_fault_sig(struct pt_regs *regs) | 
 | { | 
 | 	siginfo_t siginfo = { 0, 0, 0, }; | 
 |  | 
 | 	siginfo.si_signo = current->thread.signo; | 
 | 	siginfo.si_code = current->thread.code; | 
 | 	siginfo.si_addr = (void *)current->thread.faddr; | 
 | #ifdef DEBUG | 
 | 	printk("send_fault_sig: %p,%d,%d\n", siginfo.si_addr, siginfo.si_signo, siginfo.si_code); | 
 | #endif | 
 |  | 
 | 	if (user_mode(regs)) { | 
 | 		force_sig_info(siginfo.si_signo, | 
 | 			       &siginfo, current); | 
 | 	} else { | 
 | 		const struct exception_table_entry *fixup; | 
 |  | 
 | 		/* Are we prepared to handle this kernel fault? */ | 
 | 		if ((fixup = search_exception_tables(regs->pc))) { | 
 | 			struct pt_regs *tregs; | 
 | 			/* Create a new four word stack frame, discarding the old | 
 | 			   one.  */ | 
 | 			regs->stkadj = frame_extra_sizes[regs->format]; | 
 | 			tregs =	(struct pt_regs *)((ulong)regs + regs->stkadj); | 
 | 			tregs->vector = regs->vector; | 
 | 			tregs->format = 0; | 
 | 			tregs->pc = fixup->fixup; | 
 | 			tregs->sr = regs->sr; | 
 | 			return -1; | 
 | 		} | 
 |  | 
 | 		//if (siginfo.si_signo == SIGBUS) | 
 | 		//	force_sig_info(siginfo.si_signo, | 
 | 		//		       &siginfo, current); | 
 |  | 
 | 		/* | 
 | 		 * Oops. The kernel tried to access some bad page. We'll have to | 
 | 		 * terminate things with extreme prejudice. | 
 | 		 */ | 
 | 		if ((unsigned long)siginfo.si_addr < PAGE_SIZE) | 
 | 			printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); | 
 | 		else | 
 | 			printk(KERN_ALERT "Unable to handle kernel access"); | 
 | 		printk(" at virtual address %p\n", siginfo.si_addr); | 
 | 		die_if_kernel("Oops", regs, 0 /*error_code*/); | 
 | 		do_exit(SIGKILL); | 
 | 	} | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | /* | 
 |  * This routine handles page faults.  It determines the problem, and | 
 |  * then passes it off to one of the appropriate routines. | 
 |  * | 
 |  * error_code: | 
 |  *	bit 0 == 0 means no page found, 1 means protection fault | 
 |  *	bit 1 == 0 means read, 1 means write | 
 |  * | 
 |  * If this routine detects a bad access, it returns 1, otherwise it | 
 |  * returns 0. | 
 |  */ | 
 | int do_page_fault(struct pt_regs *regs, unsigned long address, | 
 | 			      unsigned long error_code) | 
 | { | 
 | 	struct mm_struct *mm = current->mm; | 
 | 	struct vm_area_struct * vma; | 
 | 	int write, fault; | 
 |  | 
 | #ifdef DEBUG | 
 | 	printk ("do page fault:\nregs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld, %p\n", | 
 | 		regs->sr, regs->pc, address, error_code, | 
 | 		current->mm->pgd); | 
 | #endif | 
 |  | 
 | 	/* | 
 | 	 * If we're in an interrupt or have no user | 
 | 	 * context, we must not take the fault.. | 
 | 	 */ | 
 | 	if (in_atomic() || !mm) | 
 | 		goto no_context; | 
 |  | 
 | 	down_read(&mm->mmap_sem); | 
 |  | 
 | 	vma = find_vma(mm, address); | 
 | 	if (!vma) | 
 | 		goto map_err; | 
 | 	if (vma->vm_flags & VM_IO) | 
 | 		goto acc_err; | 
 | 	if (vma->vm_start <= address) | 
 | 		goto good_area; | 
 | 	if (!(vma->vm_flags & VM_GROWSDOWN)) | 
 | 		goto map_err; | 
 | 	if (user_mode(regs)) { | 
 | 		/* Accessing the stack below usp is always a bug.  The | 
 | 		   "+ 256" is there due to some instructions doing | 
 | 		   pre-decrement on the stack and that doesn't show up | 
 | 		   until later.  */ | 
 | 		if (address + 256 < rdusp()) | 
 | 			goto map_err; | 
 | 	} | 
 | 	if (expand_stack(vma, address)) | 
 | 		goto map_err; | 
 |  | 
 | /* | 
 |  * Ok, we have a good vm_area for this memory access, so | 
 |  * we can handle it.. | 
 |  */ | 
 | good_area: | 
 | #ifdef DEBUG | 
 | 	printk("do_page_fault: good_area\n"); | 
 | #endif | 
 | 	write = 0; | 
 | 	switch (error_code & 3) { | 
 | 		default:	/* 3: write, present */ | 
 | 			/* fall through */ | 
 | 		case 2:		/* write, not present */ | 
 | 			if (!(vma->vm_flags & VM_WRITE)) | 
 | 				goto acc_err; | 
 | 			write++; | 
 | 			break; | 
 | 		case 1:		/* read, present */ | 
 | 			goto acc_err; | 
 | 		case 0:		/* read, not present */ | 
 | 			if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) | 
 | 				goto acc_err; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If for any reason at all we couldn't handle the fault, | 
 | 	 * make sure we exit gracefully rather than endlessly redo | 
 | 	 * the fault. | 
 | 	 */ | 
 |  | 
 |  survive: | 
 | 	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0); | 
 | #ifdef DEBUG | 
 | 	printk("handle_mm_fault returns %d\n",fault); | 
 | #endif | 
 | 	if (unlikely(fault & VM_FAULT_ERROR)) { | 
 | 		if (fault & VM_FAULT_OOM) | 
 | 			goto out_of_memory; | 
 | 		else if (fault & VM_FAULT_SIGBUS) | 
 | 			goto bus_err; | 
 | 		BUG(); | 
 | 	} | 
 | 	if (fault & VM_FAULT_MAJOR) | 
 | 		current->maj_flt++; | 
 | 	else | 
 | 		current->min_flt++; | 
 |  | 
 | 	up_read(&mm->mmap_sem); | 
 | 	return 0; | 
 |  | 
 | /* | 
 |  * We ran out of memory, or some other thing happened to us that made | 
 |  * us unable to handle the page fault gracefully. | 
 |  */ | 
 | out_of_memory: | 
 | 	up_read(&mm->mmap_sem); | 
 | 	if (is_global_init(current)) { | 
 | 		yield(); | 
 | 		down_read(&mm->mmap_sem); | 
 | 		goto survive; | 
 | 	} | 
 |  | 
 | 	printk("VM: killing process %s\n", current->comm); | 
 | 	if (user_mode(regs)) | 
 | 		do_group_exit(SIGKILL); | 
 |  | 
 | no_context: | 
 | 	current->thread.signo = SIGBUS; | 
 | 	current->thread.faddr = address; | 
 | 	return send_fault_sig(regs); | 
 |  | 
 | bus_err: | 
 | 	current->thread.signo = SIGBUS; | 
 | 	current->thread.code = BUS_ADRERR; | 
 | 	current->thread.faddr = address; | 
 | 	goto send_sig; | 
 |  | 
 | map_err: | 
 | 	current->thread.signo = SIGSEGV; | 
 | 	current->thread.code = SEGV_MAPERR; | 
 | 	current->thread.faddr = address; | 
 | 	goto send_sig; | 
 |  | 
 | acc_err: | 
 | 	current->thread.signo = SIGSEGV; | 
 | 	current->thread.code = SEGV_ACCERR; | 
 | 	current->thread.faddr = address; | 
 |  | 
 | send_sig: | 
 | 	up_read(&mm->mmap_sem); | 
 | 	return send_fault_sig(regs); | 
 | } |