Merge branch 'hotplug' into devel
Conflicts:
arch/arm/kernel/head-common.S
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 58a3e63..bbecaac 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -15,55 +15,6 @@
#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
- .align 2
- .type __switch_data, %object
-__switch_data:
- .long __mmap_switched
- .long __data_loc @ r4
- .long _sdata @ r5
- .long __bss_start @ r6
- .long _end @ r7
- .long processor_id @ r4
- .long __machine_arch_type @ r5
- .long __atags_pointer @ r6
- .long cr_alignment @ r7
- .long init_thread_union + THREAD_START_SP @ sp
-
-/*
- * The following fragment of code is executed with the MMU on in MMU mode,
- * and uses absolute addresses; this is not position independent.
- *
- * r0 = cp#15 control register
- * r1 = machine ID
- * r2 = atags pointer
- * r9 = processor ID
- */
-__mmap_switched:
- adr r3, __switch_data + 4
-
- ldmia r3!, {r4, r5, r6, r7}
- cmp r4, r5 @ Copy data segment if needed
-1: cmpne r5, r6
- ldrne fp, [r4], #4
- strne fp, [r5], #4
- bne 1b
-
- mov fp, #0 @ Clear BSS (and zero fp)
-1: cmp r6, r7
- strcc fp, [r6],#4
- bcc 1b
-
- ARM( ldmia r3, {r4, r5, r6, r7, sp})
- THUMB( ldmia r3, {r4, r5, r6, r7} )
- THUMB( ldr sp, [r3, #16] )
- str r9, [r4] @ Save processor ID
- str r1, [r5] @ Save machine type
- str r2, [r6] @ Save atags pointer
- bic r4, r0, #CR_A @ Clear 'A' bit
- stmia r7, {r0, r4} @ Save control register values
- b start_kernel
-ENDPROC(__mmap_switched)
-
/*
* Exception handling. Something went wrong and we can't proceed. We
* ought to tell the user, but since we don't have any guarantee that
@@ -73,21 +24,7 @@
* and hope for the best (useful if bootloader fails to pass a proper
* machine ID for example).
*/
-__error_p:
-#ifdef CONFIG_DEBUG_LL
- adr r0, str_p1
- bl printascii
- mov r0, r9
- bl printhex8
- adr r0, str_p2
- bl printascii
- b __error
-str_p1: .asciz "\nError: unrecognized/unsupported processor variant (0x"
-str_p2: .asciz ").\n"
- .align
-#endif
-ENDPROC(__error_p)
-
+ __HEAD
__error_a:
#ifdef CONFIG_DEBUG_LL
mov r4, r1 @ preserve machine ID
@@ -97,7 +34,7 @@
bl printhex8
adr r0, str_a2
bl printascii
- adr r3, 4f
+ adr r3, __lookup_machine_type_data
ldmia r3, {r4, r5, r6} @ get machine desc list
sub r4, r3, r4 @ get offset between virt&phys
add r5, r5, r4 @ convert virt addresses to
@@ -125,78 +62,6 @@
.align
#endif
-__error:
-#ifdef CONFIG_ARCH_RPC
-/*
- * Turn the screen red on a error - RiscPC only.
- */
- mov r0, #0x02000000
- mov r3, #0x11
- orr r3, r3, r3, lsl #8
- orr r3, r3, r3, lsl #16
- str r3, [r0], #4
- str r3, [r0], #4
- str r3, [r0], #4
- str r3, [r0], #4
-#endif
-1: mov r0, r0
- b 1b
-ENDPROC(__error)
-
-
-/*
- * Read processor ID register (CP#15, CR0), and look up in the linker-built
- * supported processor list. Note that we can't use the absolute addresses
- * for the __proc_info lists since we aren't running with the MMU on
- * (and therefore, we are not in the correct address space). We have to
- * calculate the offset.
- *
- * r9 = cpuid
- * Returns:
- * r3, r4, r6 corrupted
- * r5 = proc_info pointer in physical address space
- * r9 = cpuid (preserved)
- */
-__lookup_processor_type:
- adr r3, 3f
- ldmia r3, {r5 - r7}
- add r3, r3, #8
- sub r3, r3, r7 @ get offset between virt&phys
- add r5, r5, r3 @ convert virt addresses to
- add r6, r6, r3 @ physical address space
-1: ldmia r5, {r3, r4} @ value, mask
- and r4, r4, r9 @ mask wanted bits
- teq r3, r4
- beq 2f
- add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list)
- cmp r5, r6
- blo 1b
- mov r5, #0 @ unknown processor
-2: mov pc, lr
-ENDPROC(__lookup_processor_type)
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_processor_type)
- stmfd sp!, {r4 - r7, r9, lr}
- mov r9, r0
- bl __lookup_processor_type
- mov r0, r5
- ldmfd sp!, {r4 - r7, r9, pc}
-ENDPROC(lookup_processor_type)
-
-/*
- * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
- * more information about the __proc_info and __arch_info structures.
- */
- .align 2
-3: .long __proc_info_begin
- .long __proc_info_end
-4: .long .
- .long __arch_info_begin
- .long __arch_info_end
-
/*
* Lookup machine architecture in the linker-build list of architectures.
* Note that we can't use the absolute addresses for the __arch_info
@@ -209,7 +74,7 @@
* r5 = mach_info pointer in physical address space
*/
__lookup_machine_type:
- adr r3, 4b
+ adr r3, __lookup_machine_type_data
ldmia r3, {r4, r5, r6}
sub r3, r3, r4 @ get offset between virt&phys
add r5, r5, r3 @ convert virt addresses to
@@ -225,15 +90,16 @@
ENDPROC(__lookup_machine_type)
/*
- * This provides a C-API version of the above function.
+ * Look in arch/arm/kernel/arch.[ch] for information about the
+ * __arch_info structures.
*/
-ENTRY(lookup_machine_type)
- stmfd sp!, {r4 - r6, lr}
- mov r1, r0
- bl __lookup_machine_type
- mov r0, r5
- ldmfd sp!, {r4 - r6, pc}
-ENDPROC(lookup_machine_type)
+ .align 2
+ .type __lookup_machine_type_data, %object
+__lookup_machine_type_data:
+ .long .
+ .long __arch_info_begin
+ .long __arch_info_end
+ .size __lookup_machine_type_data, . - __lookup_machine_type_data
/* Determine validity of the r2 atags pointer. The heuristic requires
* that the pointer be aligned, in the first 16k of physical RAM and
@@ -265,3 +131,150 @@
1: mov r2, #0
mov pc, lr
ENDPROC(__vet_atags)
+
+/*
+ * The following fragment of code is executed with the MMU on in MMU mode,
+ * and uses absolute addresses; this is not position independent.
+ *
+ * r0 = cp#15 control register
+ * r1 = machine ID
+ * r2 = atags pointer
+ * r9 = processor ID
+ */
+ __INIT
+__mmap_switched:
+ adr r3, __mmap_switched_data
+
+ ldmia r3!, {r4, r5, r6, r7}
+ cmp r4, r5 @ Copy data segment if needed
+1: cmpne r5, r6
+ ldrne fp, [r4], #4
+ strne fp, [r5], #4
+ bne 1b
+
+ mov fp, #0 @ Clear BSS (and zero fp)
+1: cmp r6, r7
+ strcc fp, [r6],#4
+ bcc 1b
+
+ ARM( ldmia r3, {r4, r5, r6, r7, sp})
+ THUMB( ldmia r3, {r4, r5, r6, r7} )
+ THUMB( ldr sp, [r3, #16] )
+ str r9, [r4] @ Save processor ID
+ str r1, [r5] @ Save machine type
+ str r2, [r6] @ Save atags pointer
+ bic r4, r0, #CR_A @ Clear 'A' bit
+ stmia r7, {r0, r4} @ Save control register values
+ b start_kernel
+ENDPROC(__mmap_switched)
+
+ .align 2
+ .type __mmap_switched_data, %object
+__mmap_switched_data:
+ .long __data_loc @ r4
+ .long _sdata @ r5
+ .long __bss_start @ r6
+ .long _end @ r7
+ .long processor_id @ r4
+ .long __machine_arch_type @ r5
+ .long __atags_pointer @ r6
+ .long cr_alignment @ r7
+ .long init_thread_union + THREAD_START_SP @ sp
+ .size __mmap_switched_data, . - __mmap_switched_data
+
+/*
+ * This provides a C-API version of __lookup_machine_type
+ */
+ENTRY(lookup_machine_type)
+ stmfd sp!, {r4 - r6, lr}
+ mov r1, r0
+ bl __lookup_machine_type
+ mov r0, r5
+ ldmfd sp!, {r4 - r6, pc}
+ENDPROC(lookup_machine_type)
+
+/*
+ * This provides a C-API version of __lookup_processor_type
+ */
+ENTRY(lookup_processor_type)
+ stmfd sp!, {r4 - r6, r9, lr}
+ mov r9, r0
+ bl __lookup_processor_type
+ mov r0, r5
+ ldmfd sp!, {r4 - r6, r9, pc}
+ENDPROC(lookup_processor_type)
+
+/*
+ * Read processor ID register (CP#15, CR0), and look up in the linker-built
+ * supported processor list. Note that we can't use the absolute addresses
+ * for the __proc_info lists since we aren't running with the MMU on
+ * (and therefore, we are not in the correct address space). We have to
+ * calculate the offset.
+ *
+ * r9 = cpuid
+ * Returns:
+ * r3, r4, r6 corrupted
+ * r5 = proc_info pointer in physical address space
+ * r9 = cpuid (preserved)
+ */
+ __CPUINIT
+__lookup_processor_type:
+ adr r3, __lookup_processor_type_data
+ ldmia r3, {r4 - r6}
+ sub r3, r3, r4 @ get offset between virt&phys
+ add r5, r5, r3 @ convert virt addresses to
+ add r6, r6, r3 @ physical address space
+1: ldmia r5, {r3, r4} @ value, mask
+ and r4, r4, r9 @ mask wanted bits
+ teq r3, r4
+ beq 2f
+ add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list)
+ cmp r5, r6
+ blo 1b
+ mov r5, #0 @ unknown processor
+2: mov pc, lr
+ENDPROC(__lookup_processor_type)
+
+/*
+ * Look in <asm/procinfo.h> for information about the __proc_info structure.
+ */
+ .align 2
+ .type __lookup_processor_type_data, %object
+__lookup_processor_type_data:
+ .long .
+ .long __proc_info_begin
+ .long __proc_info_end
+ .size __lookup_processor_type_data, . - __lookup_processor_type_data
+
+__error_p:
+#ifdef CONFIG_DEBUG_LL
+ adr r0, str_p1
+ bl printascii
+ mov r0, r9
+ bl printhex8
+ adr r0, str_p2
+ bl printascii
+ b __error
+str_p1: .asciz "\nError: unrecognized/unsupported processor variant (0x"
+str_p2: .asciz ").\n"
+ .align
+#endif
+ENDPROC(__error_p)
+
+__error:
+#ifdef CONFIG_ARCH_RPC
+/*
+ * Turn the screen red on a error - RiscPC only.
+ */
+ mov r0, #0x02000000
+ mov r3, #0x11
+ orr r3, r3, r3, lsl #8
+ orr r3, r3, r3, lsl #16
+ str r3, [r0], #4
+ str r3, [r0], #4
+ str r3, [r0], #4
+ str r3, [r0], #4
+#endif
+1: mov r0, r0
+ b 1b
+ENDPROC(__error)