| Freescale Localbus UPM programmed to work with NAND flash |
| |
| Required properties: |
| - compatible : "fsl,upm-nand". |
| - reg : should specify localbus chip select and size used for the chip. |
| - fsl,upm-addr-offset : UPM pattern offset for the address latch. |
| - fsl,upm-cmd-offset : UPM pattern offset for the command latch. |
| - gpios : may specify optional GPIO connected to the Ready-Not-Busy pin. |
| |
| Example: |
| |
| upm@1,0 { |
| compatible = "fsl,upm-nand"; |
| reg = <1 0 1>; |
| fsl,upm-addr-offset = <16>; |
| fsl,upm-cmd-offset = <8>; |
| gpios = <&qe_pio_e 18 0>; |
| |
| flash { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "..."; |
| |
| partition@0 { |
| ... |
| }; |
| }; |
| }; |