ARM: exynos: move debug-macro.S to include/debug/
The move is necessary to support early debug output on exynos
with multiplatform configurations. This implies also moving the
plat/debug-macro.S file, but we are leaving the remaining users of that
file in place, to avoid adding large numbers of extra configuration
options to Kconfig.debug
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/arch/arm/include/debug/exynos.S b/arch/arm/include/debug/exynos.S
new file mode 100644
index 0000000..b17fdb7
--- /dev/null
+++ b/arch/arm/include/debug/exynos.S
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#define S3C_ADDR_BASE 0xF6000000
+#define S3C_VA_UART S3C_ADDR_BASE + 0x01000000
+#define EXYNOS4_PA_UART 0x13800000
+#define EXYNOS5_PA_UART 0x12C00000
+
+ /* note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
+
+ .macro addruart, rp, rv, tmp
+ mrc p15, 0, \tmp, c0, c0, 0
+ and \tmp, \tmp, #0xf0
+ teq \tmp, #0xf0 @@ A15
+ ldreq \rp, =EXYNOS5_PA_UART
+ movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4
+ ldr \rv, =S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+ add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+ add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+#endif
+ .endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+#include <debug/samsung.S>
diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S
new file mode 100644
index 0000000..f3a9cff
--- /dev/null
+++ b/arch/arm/include/debug/samsung.S
@@ -0,0 +1,87 @@
+/* arch/arm/plat-samsung/include/plat/debug-macro.S
+ *
+ * Copyright 2005, 2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-serial.h>
+
+/* The S5PV210/S5PC110 implementations are as belows. */
+
+ .macro fifo_level_s5pv210 rd, rx
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
+ and \rd, \rd, #S5PV210_UFSTAT_TXMASK
+ .endm
+
+ .macro fifo_full_s5pv210 rd, rx
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
+ tst \rd, #S5PV210_UFSTAT_TXFULL
+ .endm
+
+/* The S3C2440 implementations are used by default as they are the
+ * most widely re-used */
+
+ .macro fifo_level_s3c2440 rd, rx
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
+ and \rd, \rd, #S3C2440_UFSTAT_TXMASK
+ .endm
+
+#ifndef fifo_level
+#define fifo_level fifo_level_s3c2440
+#endif
+
+ .macro fifo_full_s3c2440 rd, rx
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
+ tst \rd, #S3C2440_UFSTAT_TXFULL
+ .endm
+
+#ifndef fifo_full
+#define fifo_full fifo_full_s3c2440
+#endif
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, # S3C2410_UTXH]
+ .endm
+
+ .macro busyuart, rd, rx
+ ldr \rd, [\rx, # S3C2410_UFCON]
+ tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
+ beq 1001f @
+ @ FIFO enabled...
+1003:
+ fifo_full \rd, \rx
+ bne 1003b
+ b 1002f
+
+1001:
+ @ busy waiting for non fifo
+ ldr \rd, [\rx, # S3C2410_UTRSTAT]
+ tst \rd, #S3C2410_UTRSTAT_TXFE
+ beq 1001b
+
+1002: @ exit busyuart
+ .endm
+
+ .macro waituart,rd,rx
+ ldr \rd, [\rx, # S3C2410_UFCON]
+ tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
+ beq 1001f @
+ @ FIFO enabled...
+1003:
+ fifo_level \rd, \rx
+ teq \rd, #0
+ bne 1003b
+ b 1002f
+1001:
+ @ idle waiting for non fifo
+ ldr \rd, [\rx, # S3C2410_UTRSTAT]
+ tst \rd, #S3C2410_UTRSTAT_TXFE
+ beq 1001b
+
+1002: @ exit busyuart
+ .endm