|  | /* | 
|  | * Wireless utility functions | 
|  | * | 
|  | * Copyright 2007-2009	Johannes Berg <johannes@sipsolutions.net> | 
|  | */ | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <net/cfg80211.h> | 
|  | #include <net/ip.h> | 
|  | #include "core.h" | 
|  |  | 
|  | struct ieee80211_rate * | 
|  | ieee80211_get_response_rate(struct ieee80211_supported_band *sband, | 
|  | u32 basic_rates, int bitrate) | 
|  | { | 
|  | struct ieee80211_rate *result = &sband->bitrates[0]; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < sband->n_bitrates; i++) { | 
|  | if (!(basic_rates & BIT(i))) | 
|  | continue; | 
|  | if (sband->bitrates[i].bitrate > bitrate) | 
|  | continue; | 
|  | result = &sband->bitrates[i]; | 
|  | } | 
|  |  | 
|  | return result; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_get_response_rate); | 
|  |  | 
|  | int ieee80211_channel_to_frequency(int chan) | 
|  | { | 
|  | if (chan < 14) | 
|  | return 2407 + chan * 5; | 
|  |  | 
|  | if (chan == 14) | 
|  | return 2484; | 
|  |  | 
|  | /* FIXME: 802.11j 17.3.8.3.2 */ | 
|  | return (chan + 1000) * 5; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_channel_to_frequency); | 
|  |  | 
|  | int ieee80211_frequency_to_channel(int freq) | 
|  | { | 
|  | if (freq == 2484) | 
|  | return 14; | 
|  |  | 
|  | if (freq < 2484) | 
|  | return (freq - 2407) / 5; | 
|  |  | 
|  | /* FIXME: 802.11j 17.3.8.3.2 */ | 
|  | return freq/5 - 1000; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_frequency_to_channel); | 
|  |  | 
|  | struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, | 
|  | int freq) | 
|  | { | 
|  | enum ieee80211_band band; | 
|  | struct ieee80211_supported_band *sband; | 
|  | int i; | 
|  |  | 
|  | for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | 
|  | sband = wiphy->bands[band]; | 
|  |  | 
|  | if (!sband) | 
|  | continue; | 
|  |  | 
|  | for (i = 0; i < sband->n_channels; i++) { | 
|  | if (sband->channels[i].center_freq == freq) | 
|  | return &sband->channels[i]; | 
|  | } | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  | EXPORT_SYMBOL(__ieee80211_get_channel); | 
|  |  | 
|  | static void set_mandatory_flags_band(struct ieee80211_supported_band *sband, | 
|  | enum ieee80211_band band) | 
|  | { | 
|  | int i, want; | 
|  |  | 
|  | switch (band) { | 
|  | case IEEE80211_BAND_5GHZ: | 
|  | want = 3; | 
|  | for (i = 0; i < sband->n_bitrates; i++) { | 
|  | if (sband->bitrates[i].bitrate == 60 || | 
|  | sband->bitrates[i].bitrate == 120 || | 
|  | sband->bitrates[i].bitrate == 240) { | 
|  | sband->bitrates[i].flags |= | 
|  | IEEE80211_RATE_MANDATORY_A; | 
|  | want--; | 
|  | } | 
|  | } | 
|  | WARN_ON(want); | 
|  | break; | 
|  | case IEEE80211_BAND_2GHZ: | 
|  | want = 7; | 
|  | for (i = 0; i < sband->n_bitrates; i++) { | 
|  | if (sband->bitrates[i].bitrate == 10) { | 
|  | sband->bitrates[i].flags |= | 
|  | IEEE80211_RATE_MANDATORY_B | | 
|  | IEEE80211_RATE_MANDATORY_G; | 
|  | want--; | 
|  | } | 
|  |  | 
|  | if (sband->bitrates[i].bitrate == 20 || | 
|  | sband->bitrates[i].bitrate == 55 || | 
|  | sband->bitrates[i].bitrate == 110 || | 
|  | sband->bitrates[i].bitrate == 60 || | 
|  | sband->bitrates[i].bitrate == 120 || | 
|  | sband->bitrates[i].bitrate == 240) { | 
|  | sband->bitrates[i].flags |= | 
|  | IEEE80211_RATE_MANDATORY_G; | 
|  | want--; | 
|  | } | 
|  |  | 
|  | if (sband->bitrates[i].bitrate != 10 && | 
|  | sband->bitrates[i].bitrate != 20 && | 
|  | sband->bitrates[i].bitrate != 55 && | 
|  | sband->bitrates[i].bitrate != 110) | 
|  | sband->bitrates[i].flags |= | 
|  | IEEE80211_RATE_ERP_G; | 
|  | } | 
|  | WARN_ON(want != 0 && want != 3 && want != 6); | 
|  | break; | 
|  | case IEEE80211_NUM_BANDS: | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | void ieee80211_set_bitrate_flags(struct wiphy *wiphy) | 
|  | { | 
|  | enum ieee80211_band band; | 
|  |  | 
|  | for (band = 0; band < IEEE80211_NUM_BANDS; band++) | 
|  | if (wiphy->bands[band]) | 
|  | set_mandatory_flags_band(wiphy->bands[band], band); | 
|  | } | 
|  |  | 
|  | int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev, | 
|  | struct key_params *params, int key_idx, | 
|  | const u8 *mac_addr) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (key_idx > 5) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * Disallow pairwise keys with non-zero index unless it's WEP | 
|  | * (because current deployments use pairwise WEP keys with | 
|  | * non-zero indizes but 802.11i clearly specifies to use zero) | 
|  | */ | 
|  | if (mac_addr && key_idx && | 
|  | params->cipher != WLAN_CIPHER_SUITE_WEP40 && | 
|  | params->cipher != WLAN_CIPHER_SUITE_WEP104) | 
|  | return -EINVAL; | 
|  |  | 
|  | switch (params->cipher) { | 
|  | case WLAN_CIPHER_SUITE_WEP40: | 
|  | if (params->key_len != WLAN_KEY_LEN_WEP40) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | if (params->key_len != WLAN_KEY_LEN_TKIP) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | if (params->key_len != WLAN_KEY_LEN_CCMP) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_WEP104: | 
|  | if (params->key_len != WLAN_KEY_LEN_WEP104) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_AES_CMAC: | 
|  | if (params->key_len != WLAN_KEY_LEN_AES_CMAC) | 
|  | return -EINVAL; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (params->seq) { | 
|  | switch (params->cipher) { | 
|  | case WLAN_CIPHER_SUITE_WEP40: | 
|  | case WLAN_CIPHER_SUITE_WEP104: | 
|  | /* These ciphers do not use key sequence */ | 
|  | return -EINVAL; | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | case WLAN_CIPHER_SUITE_AES_CMAC: | 
|  | if (params->seq_len != 6) | 
|  | return -EINVAL; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 0; i < rdev->wiphy.n_cipher_suites; i++) | 
|  | if (params->cipher == rdev->wiphy.cipher_suites[i]) | 
|  | break; | 
|  | if (i == rdev->wiphy.n_cipher_suites) | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ | 
|  | /* Ethernet-II snap header (RFC1042 for most EtherTypes) */ | 
|  | const unsigned char rfc1042_header[] __aligned(2) = | 
|  | { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; | 
|  | EXPORT_SYMBOL(rfc1042_header); | 
|  |  | 
|  | /* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ | 
|  | const unsigned char bridge_tunnel_header[] __aligned(2) = | 
|  | { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; | 
|  | EXPORT_SYMBOL(bridge_tunnel_header); | 
|  |  | 
|  | unsigned int ieee80211_hdrlen(__le16 fc) | 
|  | { | 
|  | unsigned int hdrlen = 24; | 
|  |  | 
|  | if (ieee80211_is_data(fc)) { | 
|  | if (ieee80211_has_a4(fc)) | 
|  | hdrlen = 30; | 
|  | if (ieee80211_is_data_qos(fc)) | 
|  | hdrlen += IEEE80211_QOS_CTL_LEN; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (ieee80211_is_ctl(fc)) { | 
|  | /* | 
|  | * ACK and CTS are 10 bytes, all others 16. To see how | 
|  | * to get this condition consider | 
|  | *   subtype mask:   0b0000000011110000 (0x00F0) | 
|  | *   ACK subtype:    0b0000000011010000 (0x00D0) | 
|  | *   CTS subtype:    0b0000000011000000 (0x00C0) | 
|  | *   bits that matter:         ^^^      (0x00E0) | 
|  | *   value of those: 0b0000000011000000 (0x00C0) | 
|  | */ | 
|  | if ((fc & cpu_to_le16(0x00E0)) == cpu_to_le16(0x00C0)) | 
|  | hdrlen = 10; | 
|  | else | 
|  | hdrlen = 16; | 
|  | } | 
|  | out: | 
|  | return hdrlen; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_hdrlen); | 
|  |  | 
|  | unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb) | 
|  | { | 
|  | const struct ieee80211_hdr *hdr = | 
|  | (const struct ieee80211_hdr *)skb->data; | 
|  | unsigned int hdrlen; | 
|  |  | 
|  | if (unlikely(skb->len < 10)) | 
|  | return 0; | 
|  | hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
|  | if (unlikely(hdrlen > skb->len)) | 
|  | return 0; | 
|  | return hdrlen; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb); | 
|  |  | 
|  | static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) | 
|  | { | 
|  | int ae = meshhdr->flags & MESH_FLAGS_AE; | 
|  | /* 7.1.3.5a.2 */ | 
|  | switch (ae) { | 
|  | case 0: | 
|  | return 6; | 
|  | case MESH_FLAGS_AE_A4: | 
|  | return 12; | 
|  | case MESH_FLAGS_AE_A5_A6: | 
|  | return 18; | 
|  | case (MESH_FLAGS_AE_A4 | MESH_FLAGS_AE_A5_A6): | 
|  | return 24; | 
|  | default: | 
|  | return 6; | 
|  | } | 
|  | } | 
|  |  | 
|  | int ieee80211_data_to_8023(struct sk_buff *skb, u8 *addr, | 
|  | enum nl80211_iftype iftype) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
|  | u16 hdrlen, ethertype; | 
|  | u8 *payload; | 
|  | u8 dst[ETH_ALEN]; | 
|  | u8 src[ETH_ALEN] __aligned(2); | 
|  |  | 
|  | if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) | 
|  | return -1; | 
|  |  | 
|  | hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
|  |  | 
|  | /* convert IEEE 802.11 header + possible LLC headers into Ethernet | 
|  | * header | 
|  | * IEEE 802.11 address fields: | 
|  | * ToDS FromDS Addr1 Addr2 Addr3 Addr4 | 
|  | *   0     0   DA    SA    BSSID n/a | 
|  | *   0     1   DA    BSSID SA    n/a | 
|  | *   1     0   BSSID SA    DA    n/a | 
|  | *   1     1   RA    TA    DA    SA | 
|  | */ | 
|  | memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN); | 
|  | memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN); | 
|  |  | 
|  | switch (hdr->frame_control & | 
|  | cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) { | 
|  | case cpu_to_le16(IEEE80211_FCTL_TODS): | 
|  | if (unlikely(iftype != NL80211_IFTYPE_AP && | 
|  | iftype != NL80211_IFTYPE_AP_VLAN)) | 
|  | return -1; | 
|  | break; | 
|  | case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS): | 
|  | if (unlikely(iftype != NL80211_IFTYPE_WDS && | 
|  | iftype != NL80211_IFTYPE_MESH_POINT)) | 
|  | return -1; | 
|  | if (iftype == NL80211_IFTYPE_MESH_POINT) { | 
|  | struct ieee80211s_hdr *meshdr = | 
|  | (struct ieee80211s_hdr *) (skb->data + hdrlen); | 
|  | hdrlen += ieee80211_get_mesh_hdrlen(meshdr); | 
|  | if (meshdr->flags & MESH_FLAGS_AE_A5_A6) { | 
|  | memcpy(dst, meshdr->eaddr1, ETH_ALEN); | 
|  | memcpy(src, meshdr->eaddr2, ETH_ALEN); | 
|  | } | 
|  | } | 
|  | break; | 
|  | case cpu_to_le16(IEEE80211_FCTL_FROMDS): | 
|  | if ((iftype != NL80211_IFTYPE_STATION && | 
|  | iftype != NL80211_IFTYPE_MESH_POINT) || | 
|  | (is_multicast_ether_addr(dst) && | 
|  | !compare_ether_addr(src, addr))) | 
|  | return -1; | 
|  | if (iftype == NL80211_IFTYPE_MESH_POINT) { | 
|  | struct ieee80211s_hdr *meshdr = | 
|  | (struct ieee80211s_hdr *) (skb->data + hdrlen); | 
|  | hdrlen += ieee80211_get_mesh_hdrlen(meshdr); | 
|  | if (meshdr->flags & MESH_FLAGS_AE_A4) | 
|  | memcpy(src, meshdr->eaddr1, ETH_ALEN); | 
|  | } | 
|  | break; | 
|  | case cpu_to_le16(0): | 
|  | if (iftype != NL80211_IFTYPE_ADHOC) | 
|  | return -1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (unlikely(skb->len - hdrlen < 8)) | 
|  | return -1; | 
|  |  | 
|  | payload = skb->data + hdrlen; | 
|  | ethertype = (payload[6] << 8) | payload[7]; | 
|  |  | 
|  | if (likely((compare_ether_addr(payload, rfc1042_header) == 0 && | 
|  | ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || | 
|  | compare_ether_addr(payload, bridge_tunnel_header) == 0)) { | 
|  | /* remove RFC1042 or Bridge-Tunnel encapsulation and | 
|  | * replace EtherType */ | 
|  | skb_pull(skb, hdrlen + 6); | 
|  | memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN); | 
|  | memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN); | 
|  | } else { | 
|  | struct ethhdr *ehdr; | 
|  | __be16 len; | 
|  |  | 
|  | skb_pull(skb, hdrlen); | 
|  | len = htons(skb->len); | 
|  | ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr)); | 
|  | memcpy(ehdr->h_dest, dst, ETH_ALEN); | 
|  | memcpy(ehdr->h_source, src, ETH_ALEN); | 
|  | ehdr->h_proto = len; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_data_to_8023); | 
|  |  | 
|  | int ieee80211_data_from_8023(struct sk_buff *skb, u8 *addr, | 
|  | enum nl80211_iftype iftype, u8 *bssid, bool qos) | 
|  | { | 
|  | struct ieee80211_hdr hdr; | 
|  | u16 hdrlen, ethertype; | 
|  | __le16 fc; | 
|  | const u8 *encaps_data; | 
|  | int encaps_len, skip_header_bytes; | 
|  | int nh_pos, h_pos; | 
|  | int head_need; | 
|  |  | 
|  | if (unlikely(skb->len < ETH_HLEN)) | 
|  | return -EINVAL; | 
|  |  | 
|  | nh_pos = skb_network_header(skb) - skb->data; | 
|  | h_pos = skb_transport_header(skb) - skb->data; | 
|  |  | 
|  | /* convert Ethernet header to proper 802.11 header (based on | 
|  | * operation mode) */ | 
|  | ethertype = (skb->data[12] << 8) | skb->data[13]; | 
|  | fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA); | 
|  |  | 
|  | switch (iftype) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); | 
|  | /* DA BSSID SA */ | 
|  | memcpy(hdr.addr1, skb->data, ETH_ALEN); | 
|  | memcpy(hdr.addr2, addr, ETH_ALEN); | 
|  | memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN); | 
|  | hdrlen = 24; | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | fc |= cpu_to_le16(IEEE80211_FCTL_TODS); | 
|  | /* BSSID SA DA */ | 
|  | memcpy(hdr.addr1, bssid, ETH_ALEN); | 
|  | memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | 
|  | memcpy(hdr.addr3, skb->data, ETH_ALEN); | 
|  | hdrlen = 24; | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | /* DA SA BSSID */ | 
|  | memcpy(hdr.addr1, skb->data, ETH_ALEN); | 
|  | memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | 
|  | memcpy(hdr.addr3, bssid, ETH_ALEN); | 
|  | hdrlen = 24; | 
|  | break; | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | if (qos) { | 
|  | fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA); | 
|  | hdrlen += 2; | 
|  | } | 
|  |  | 
|  | hdr.frame_control = fc; | 
|  | hdr.duration_id = 0; | 
|  | hdr.seq_ctrl = 0; | 
|  |  | 
|  | skip_header_bytes = ETH_HLEN; | 
|  | if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) { | 
|  | encaps_data = bridge_tunnel_header; | 
|  | encaps_len = sizeof(bridge_tunnel_header); | 
|  | skip_header_bytes -= 2; | 
|  | } else if (ethertype > 0x600) { | 
|  | encaps_data = rfc1042_header; | 
|  | encaps_len = sizeof(rfc1042_header); | 
|  | skip_header_bytes -= 2; | 
|  | } else { | 
|  | encaps_data = NULL; | 
|  | encaps_len = 0; | 
|  | } | 
|  |  | 
|  | skb_pull(skb, skip_header_bytes); | 
|  | nh_pos -= skip_header_bytes; | 
|  | h_pos -= skip_header_bytes; | 
|  |  | 
|  | head_need = hdrlen + encaps_len - skb_headroom(skb); | 
|  |  | 
|  | if (head_need > 0 || skb_cloned(skb)) { | 
|  | head_need = max(head_need, 0); | 
|  | if (head_need) | 
|  | skb_orphan(skb); | 
|  |  | 
|  | if (pskb_expand_head(skb, head_need, 0, GFP_ATOMIC)) { | 
|  | printk(KERN_ERR "failed to reallocate Tx buffer\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | skb->truesize += head_need; | 
|  | } | 
|  |  | 
|  | if (encaps_data) { | 
|  | memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len); | 
|  | nh_pos += encaps_len; | 
|  | h_pos += encaps_len; | 
|  | } | 
|  |  | 
|  | memcpy(skb_push(skb, hdrlen), &hdr, hdrlen); | 
|  |  | 
|  | nh_pos += hdrlen; | 
|  | h_pos += hdrlen; | 
|  |  | 
|  | /* Update skb pointers to various headers since this modified frame | 
|  | * is going to go through Linux networking code that may potentially | 
|  | * need things like pointer to IP header. */ | 
|  | skb_set_mac_header(skb, 0); | 
|  | skb_set_network_header(skb, nh_pos); | 
|  | skb_set_transport_header(skb, h_pos); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_data_from_8023); | 
|  |  | 
|  | /* Given a data frame determine the 802.1p/1d tag to use. */ | 
|  | unsigned int cfg80211_classify8021d(struct sk_buff *skb) | 
|  | { | 
|  | unsigned int dscp; | 
|  |  | 
|  | /* skb->priority values from 256->263 are magic values to | 
|  | * directly indicate a specific 802.1d priority.  This is used | 
|  | * to allow 802.1d priority to be passed directly in from VLAN | 
|  | * tags, etc. | 
|  | */ | 
|  | if (skb->priority >= 256 && skb->priority <= 263) | 
|  | return skb->priority - 256; | 
|  |  | 
|  | switch (skb->protocol) { | 
|  | case htons(ETH_P_IP): | 
|  | dscp = ip_hdr(skb)->tos & 0xfc; | 
|  | break; | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return dscp >> 5; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_classify8021d); | 
|  |  | 
|  | const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie) | 
|  | { | 
|  | u8 *end, *pos; | 
|  |  | 
|  | pos = bss->information_elements; | 
|  | if (pos == NULL) | 
|  | return NULL; | 
|  | end = pos + bss->len_information_elements; | 
|  |  | 
|  | while (pos + 1 < end) { | 
|  | if (pos + 2 + pos[1] > end) | 
|  | break; | 
|  | if (pos[0] == ie) | 
|  | return pos; | 
|  | pos += 2 + pos[1]; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_bss_get_ie); | 
|  |  | 
|  | void cfg80211_upload_connect_keys(struct wireless_dev *wdev) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
|  | struct net_device *dev = wdev->netdev; | 
|  | int i; | 
|  |  | 
|  | if (!wdev->connect_keys) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < 6; i++) { | 
|  | if (!wdev->connect_keys->params[i].cipher) | 
|  | continue; | 
|  | if (rdev->ops->add_key(wdev->wiphy, dev, i, NULL, | 
|  | &wdev->connect_keys->params[i])) { | 
|  | printk(KERN_ERR "%s: failed to set key %d\n", | 
|  | dev->name, i); | 
|  | continue; | 
|  | } | 
|  | if (wdev->connect_keys->def == i) | 
|  | if (rdev->ops->set_default_key(wdev->wiphy, dev, i)) { | 
|  | printk(KERN_ERR "%s: failed to set defkey %d\n", | 
|  | dev->name, i); | 
|  | continue; | 
|  | } | 
|  | if (wdev->connect_keys->defmgmt == i) | 
|  | if (rdev->ops->set_default_mgmt_key(wdev->wiphy, dev, i)) | 
|  | printk(KERN_ERR "%s: failed to set mgtdef %d\n", | 
|  | dev->name, i); | 
|  | } | 
|  |  | 
|  | kfree(wdev->connect_keys); | 
|  | wdev->connect_keys = NULL; | 
|  | } | 
|  |  | 
|  | static void cfg80211_process_wdev_events(struct wireless_dev *wdev) | 
|  | { | 
|  | struct cfg80211_event *ev; | 
|  | unsigned long flags; | 
|  | const u8 *bssid = NULL; | 
|  |  | 
|  | spin_lock_irqsave(&wdev->event_lock, flags); | 
|  | while (!list_empty(&wdev->event_list)) { | 
|  | ev = list_first_entry(&wdev->event_list, | 
|  | struct cfg80211_event, list); | 
|  | list_del(&ev->list); | 
|  | spin_unlock_irqrestore(&wdev->event_lock, flags); | 
|  |  | 
|  | wdev_lock(wdev); | 
|  | switch (ev->type) { | 
|  | case EVENT_CONNECT_RESULT: | 
|  | if (!is_zero_ether_addr(ev->cr.bssid)) | 
|  | bssid = ev->cr.bssid; | 
|  | __cfg80211_connect_result( | 
|  | wdev->netdev, bssid, | 
|  | ev->cr.req_ie, ev->cr.req_ie_len, | 
|  | ev->cr.resp_ie, ev->cr.resp_ie_len, | 
|  | ev->cr.status, | 
|  | ev->cr.status == WLAN_STATUS_SUCCESS, | 
|  | NULL); | 
|  | break; | 
|  | case EVENT_ROAMED: | 
|  | __cfg80211_roamed(wdev, ev->rm.bssid, | 
|  | ev->rm.req_ie, ev->rm.req_ie_len, | 
|  | ev->rm.resp_ie, ev->rm.resp_ie_len); | 
|  | break; | 
|  | case EVENT_DISCONNECTED: | 
|  | __cfg80211_disconnected(wdev->netdev, | 
|  | ev->dc.ie, ev->dc.ie_len, | 
|  | ev->dc.reason, true); | 
|  | break; | 
|  | case EVENT_IBSS_JOINED: | 
|  | __cfg80211_ibss_joined(wdev->netdev, ev->ij.bssid); | 
|  | break; | 
|  | } | 
|  | wdev_unlock(wdev); | 
|  |  | 
|  | kfree(ev); | 
|  |  | 
|  | spin_lock_irqsave(&wdev->event_lock, flags); | 
|  | } | 
|  | spin_unlock_irqrestore(&wdev->event_lock, flags); | 
|  | } | 
|  |  | 
|  | void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev) | 
|  | { | 
|  | struct wireless_dev *wdev; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  | ASSERT_RDEV_LOCK(rdev); | 
|  |  | 
|  | mutex_lock(&rdev->devlist_mtx); | 
|  |  | 
|  | list_for_each_entry(wdev, &rdev->netdev_list, list) | 
|  | cfg80211_process_wdev_events(wdev); | 
|  |  | 
|  | mutex_unlock(&rdev->devlist_mtx); | 
|  | } | 
|  |  | 
|  | int cfg80211_change_iface(struct cfg80211_registered_device *rdev, | 
|  | struct net_device *dev, enum nl80211_iftype ntype, | 
|  | u32 *flags, struct vif_params *params) | 
|  | { | 
|  | int err; | 
|  | enum nl80211_iftype otype = dev->ieee80211_ptr->iftype; | 
|  |  | 
|  | ASSERT_RDEV_LOCK(rdev); | 
|  |  | 
|  | /* don't support changing VLANs, you just re-create them */ | 
|  | if (otype == NL80211_IFTYPE_AP_VLAN) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (!rdev->ops->change_virtual_intf || | 
|  | !(rdev->wiphy.interface_modes & (1 << ntype))) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (ntype != otype) { | 
|  | switch (otype) { | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | cfg80211_leave_ibss(rdev, dev, false); | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | cfg80211_disconnect(rdev, dev, | 
|  | WLAN_REASON_DEAUTH_LEAVING, true); | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | /* mesh should be handled? */ | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | cfg80211_process_rdev_events(rdev); | 
|  | } | 
|  |  | 
|  | err = rdev->ops->change_virtual_intf(&rdev->wiphy, dev, | 
|  | ntype, flags, params); | 
|  |  | 
|  | WARN_ON(!err && dev->ieee80211_ptr->iftype != ntype); | 
|  |  | 
|  | return err; | 
|  | } |